PM8150B 102 Power IC – Qualcomm Charger & Fuel Gauge PMIC
₨ 250
Qualcomm PM8150B 102 Charger and Fuel Gauge PMIC
The PM8150B 102 Power IC is the Qualcomm interface PMIC that controls charging, battery fuel gauging, and USB Type-C detection on Snapdragon 855 and 865 platform boards. Technicians replace it when a phone stops detecting the charger, OTG accessories get no power, or the battery percentage reads wrong after liquid damage or a faulty high-current adapter. The 102 marking fits Xiaomi Mi 9, Mi 10, Mi 10 Pro, and Redmi K20 Pro boards. Mechanicpk supplies this PMIC for board-level BGA rework across Pakistan. Match the chip marking on your board before you order.
PM8150B Power IC: Qualcomm Interface PMIC for Charging and Fuel Gauge Control
The PM8150B 102 Power IC is Qualcomm’s interface PMIC that runs the charging path, the battery fuel gauge, and the USB Type-C logic on SM8150 and SM8250 platform boards. When you search for a PM8150B power IC, you usually have a Snapdragon 855 or 865 phone on your bench with a charging issue, a dead phone that refuses to draw current from the charger, or a battery percentage that jumps without reason. Qualcomm splits power duties on these platforms: the PM8150 or PM8250 handles the core rails, and the PM8150B takes over the charger and gauge side. That division tells you exactly where to probe before you commit to an IC replacement, and it saves you from swapping the wrong PMIC.
Where the PM8150B Sits in the Power Architecture
Qualcomm designs the PM8150B as the bridge between the USB-C port, the battery, and the application processor. Its battery interface module (BIM) and ADC read battery presence through BAT_ID or BAT_THERM, and its battery current limiting (BCL) block protects the system during heavy load. On battery removal, the BIM raises an interrupt that tells the SoC to run a proper SIM card shutdown. The chip communicates with the SoC over the SPMI bus, and Linux device-tree sources list a Type-C controller, a VBUS regulator for OTG, GPIOs, and an LPG lighting block inside this PMIC. On high-wattage designs, Qualcomm pairs it with the SMB1390 divide-by-2 charge pump, so a fast-charge fault can sit in either chip.
Fault Symptoms That Point to the PM8150B
A failed PM8150B usually shows up as no charging response at all, OTG devices that never receive power, a charger that the phone detects but never charges from, or a battery level that stays frozen at one value. Liquid damage, cheap high-current chargers, and USB port shorts kill this IC more often than anything else. Before you replace it, measure VBUS at the Type-C connector, check the battery connector lines, and use a thermal camera or freeze spray to locate any short on the rails around the chip. Confirm the SoC platform and read the board marking carefully so you order the correct PMIC variant for your motherboard.
Replacement Workflow on Your Repair Bench
PM8150B removal follows a standard BGA rework routine. Fix the board in a PCB holder, apply quality flux, and preheat the board so the multilayer PCB stays flat. Lift the old chip with your hot air station using a nozzle that matches the package, then clean the pads with low-melt solder and desoldering wick until every pad sits level. Reball the new IC with the correct stencil from your reballing kit, align it under a microscope, and reflow evenly. After cooling, check the main rails for shorts with a multimeter before you connect a battery. A DC power supply lets you watch current draw during the first boot and the first charge test, which confirms the PMIC handshake works.
Why Technicians Choose This PM8150B Power IC
You get a part that matches the PM8150B marking with the 102 suffix found on Xiaomi Snapdragon 855 and 865 boards. One PMIC swap restores charger detection, gauge readings, and Type-C role switching without a full motherboard replacement, which keeps your repair cost competitive. Stock it alongside the PM8150 core PMIC and the SMB1390 charge pump so you can handle the complete power section of these flagships. For an upgrade path, a trinocular microscope and a preheating station make repeated BGA work on these dense boards faster and safer.
| Weight | 0.1 kg |
|---|
Key Features
- ✓Qualcomm interface PMIC for charger and fuel gauge control
- ✓Battery interface module with ADC for BAT_ID / BAT_THERM detection
- ✓Battery current limiting (BCL) for system protection under heavy load
- ✓Integrated USB Type-C controller logic
- ✓VBUS regulator for USB OTG power output
- ✓SPMI bus communication with the Snapdragon SoC
- ✓Works alongside the SMB1390 charge pump on fast-charge designs
- ✓102 marking for Xiaomi SM8150/SM8250 boards
Specifications
| Brand | Qualcomm |
|---|---|
| Model | PM8150B (102 marking) |
| Category | Mobile Phone Power Management IC (Charger / Fuel Gauge PMIC) |
| Compatibility | Qualcomm SM8150 and SM8250 platform boards |
| Supported Devices | Xiaomi Mi 9, Mi 10, Mi 10 Pro, Redmi K20 Pro |
| Technology | Charger and fuel gauge interface PMIC with BIM/ADC, battery current limiting, USB Type-C controller, VBUS (OTG) regulator, SPMI interface |
Common Repair Uses
- ✓Board-level charging and battery-management faults on Snapdragon 855/865 phones
- ✓Phone shows no charging response with a known-good charger and port
- ✓Charger detected but battery never charges
- ✓Battery percentage frozen or reading wrong after a fault
- ✓OTG accessories receive no power through USB-C
- ✓Dead phone after liquid damage around the charging section
- ✓PMIC failure after use of a faulty high-current adapter
- ✓Short on charging rails traced to the PMIC with thermal camera or freeze spray
- ✓PMIC replacement during complete power-section rework with PM8150 and SMB1390
Compatible Devices
- ✓Verified at device level for the listed Xiaomi models and at platform level for SM8150/SM8250 designs that use the PM8150B
- ✓Xiaomi Mi 9
- ✓Xiaomi Mi 10
- ✓Xiaomi Mi 10 Pro
- ✓Redmi K20 Pro
- ✓Snapdragon 855 / 855 Plus / 860 (SM8150) platform boards using PM8150B
- ✓Snapdragon 865 / 870 (SM8250) platform boards using PM8150B
- ✓Qualcomm QRB5165 platform boards
- ✓Any board carrying the matching PM8150B 102 marking (confirm before ordering)



