Yihua YH-982 C210 Fast Heating Soldering Iron (3 Tips)
₨ 14,000
Yihua 982 C210 Soldering Iron Kit
The Yihua 982 C210 soldering iron gives mobile repair benches a 40W cartridge-tip system with PID temperature control and an LCD readout. The fast-heating C210 handle reaches working temperature in seconds, and the 90–450°C range covers leaded and lead-free solder on fine SMD pads, flex connectors, and charging port joints. The kit ships with three C210 tips, so you can switch between fine-point and chisel work without hunting for spares. Digital calibration, memory presets, and sleep mode keep your settings consistent across long repair sessions. Technicians in Pakistan use this C210 soldering station for charging issue repairs, jumper wire work, and general board-level rework.
Out of stock
Yihua 982 C210 Soldering Iron: Precision Heat for Board-Level Work
The Yihua 982 C210 soldering iron targets technicians who need controlled, repeatable heat on small components. The control unit pairs with a C210 handpiece, and the cartridge design puts the heating element and tip in one replaceable part. That integration moves heat to the joint quickly and recovers fast between pads. If you handle mobile boards daily, this layout gives you tighter control than a basic iron without moving up to a full rework station.
PID Temperature Control and Heating Behaviour
The 982 family uses PID control to hold the set temperature instead of swinging around it. You set a value between 90°C and 450°C, and the LCD shows the live reading so you can confirm the tip sits where you expect before it touches the pad. The C210 heating element draws 40W, and the cartridge reaches working temperature within seconds. That speed matters at the bench: you cut idle time between boards and avoid leaving a hot iron on a PCB while you reposition it.
Digital calibration lets you correct tip temperature drift against a reference, which keeps results consistent as tips age. Celsius and Fahrenheit switching, a buzzer prompt, and memory presets round out the control set. Save one preset for fine SMD work and another for heavier joints, then recall them with a button press instead of re-entering values on every board.
Where the C210 Tip Fits in a Mobile Repair Workflow
C210 cartridges suit micro-soldering. The small thermal mass lets you work on fine pitch pads, battery connector pins, FPC joints, and charging port legs without lifting neighbouring components. You pick this iron when a job calls for placement accuracy more than raw wattage. Typical jobs include jumper lagana on broken tracks, tinning pads before an IC change karna, cleaning solder bridges after a hardware fault, and refreshing joints on a loose USB or Type-C port.
The 40W ceiling defines the limit. Large ground planes and shielding cans pull heat quickly, so pair this iron with a hot air station and preheater for those jobs. Many benches keep the C210 iron for detail work and a separate hot air unit for removal. If you plan a reballing job, add a reballing kit and a PCB holder to the same bench setup, and bring a microscope in when the pitch drops below what your eye can resolve.
Sleep Mode, Safety, and Bench Practicality
The station drops into sleep mode after a period of inactivity and wakes when you pick up the handpiece. Auto shutdown follows if you leave it idle longer, which protects tips from oxidation and cuts the risk of leaving a hot iron unattended in a busy workshop. The 982 family also carries an anti-static design, which matters when you handle boards with sensitive components. A multimeter beside the station helps you check continuity after every joint you rework, and a test box confirms the repair before you close the phone.
Three Tips and Tip Care
The kit includes three C210 tips, which gives you a fine point for pads and a broader profile for drag soldering and tinning. Keep the tip tinned between jobs, wipe it on a brass or damp cleaning pad, and drop the temperature when you pause. Those habits extend cartridge life and keep heat transfer consistent. When a tip wears out, you replace the cartridge instead of the whole handle.
Input Power and Buying Notes
The 982 family accepts a wide 110–240V AC input at 50–60Hz, so the unit runs on Pakistani mains supply. Confirm the plug type when you receive the unit, and use a stable power source on the bench to protect the control board during voltage swings. For a shop that needs a dependable entry into cartridge-tip soldering, this C210 setup delivers verified temperature control, quick recovery, and a spare tip set in one purchase.
| Weight | 1.5 kg |
|---|
Key Features
- ✓40W C210 heating element for fine-pitch work
- ✓PID temperature control for stable heat
- ✓90°C–450°C adjustable range with live LCD reading
- ✓Fast heating to working temperature within seconds
- ✓Digital temperature calibration
- ✓Memory presets for repeat jobs
- ✓Sleep mode and auto shutdown
- ✓Celsius/Fahrenheit switching with buzzer prompt
Specifications
| Brand | Yihua |
|---|---|
| Model | YH-982 (C210 handle) |
| Category | Soldering Station / Soldering Iron |
| Compatibility | C210 series cartridge soldering tips |
| Technology | PID temperature control, digital calibration, LCD display, memory presets, sleep mode and auto shutdown |
| Input Voltage | 110–240V AC, 50–60Hz |
| Power Rating | 40W (C210 heating element) |
| Temperature Range | 90°C–450°C (194°F–842°F) |
| Display | LCD |
| Included Tips | 3 x C210 soldering tips |
Common Repair Uses
- ✓Fine SMD soldering and rework on mobile boards.
- ✓Charging port and Type-C connector re-soldering
- ✓Jumper wire repair on broken tracks
- ✓Pad tinning before IC change karna
- ✓Solder bridge cleaning after a hardware fault
- ✓Battery connector and FPC connector repair
- ✓Small passive component replacement (capacitors, resistors)
- ✓Charging issue repair on sub-boards
- ✓General micro-soldering and board cleaning
Compatible Devices
- ✓Universal board-level soldering tool. It is not device-specific and works on any phone, tablet, or small PCB where fine SMD soldering is needed.
- ✓Samsung Android motherboards
- ✓Oppo and Realme boards
- ✓Vivo boards
- ✓Infinix and Tecno boards
- ✓Xiaomi and Redmi boards
- ✓iPhone logic boards (fine pad and connector work)
- ✓Tablet motherboards
- ✓Charging port sub-boards and flex connectors
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
Does this soldering iron work with lead-free solder?
Can I use C245 tips in the C210 handle?
Related products
i2C MC14 Face ID Repair Instrument For iPhone X to 14Pro Max
In stock
Sunshine M1 Pro Intelligent Height Adjustable Repair Table (72cm to 117cm)
In stock
SUNSHINE SS-890B Mini Laser Machine for iPhone Back Glass & Screen Bracket Removal
In stock


