338S00817 Wireless Charging IC for iPhone 13 Series
₨ 400
338S00817 Wireless Charging IC
The 338S00817 is a wireless charging IC for the iPhone 13 series, covering the iPhone 13, 13 mini, 13 Pro and 13 Pro Max. When wired charging works but wireless charging does not start, this component is the first place to inspect on the board. Replacing it requires board-level rework with a hot air station, a microscope for pad alignment, and clean flux work. Before ordering, confirm the part marking on the device, because the 338S00770 charging IC serves a different function on the same series.
iPhone 13 Wireless Charging IC 338S00817: Role and Replacement
The iPhone 13 wireless charging IC 338S00817 manages wireless power reception on the iPhone 13 series. It sits apart from the wired charging path, so a technician can separate a wireless fault from a USB fault during diagnosis. This part suits repair shops and service centers that handle board-level charging repairs on these models.
Where It Fits in the Charging Path
The series also uses the 338S00770-B0 as its charging IC, which handles a different role in the power chain. Testing the two separately saves time on the bench. If wired charging fails too, the fault may lie outside the wireless section, and the technician should check the wired path before replacing any IC.
Fault Symptoms Technicians Check First
A device that shows no response on a wireless pad, while wired charging works normally, points toward this section. Check the pads, the coil connection, and nearby passive components before removing the IC. Liquid damage and previous board-level repairs can also cause this fault, so inspect for corrosion around the IC area under magnification.
Replacement Workflow on the Bench
Remove the IC with controlled hot air, then clean the pads with flux and a solder wick without lifting them. Align the new 338S00817 under a microscope, reflow it evenly, and check for bridged pins. Test wireless charging on a known-good pad after reassembly, and confirm wired charging still works.
| Weight | 0.1 kg |
|---|
Key Features
- ✓Wireless charging power management for iPhone 13 series
- ✓Board-level replacement part for repair shops
- ✓Model-specific match for iPhone 13, 13 mini, 13 Pro and 13 Pro Max
- ✓Requires hot air rework and microscope alignment
Specifications
| Brand | Apple |
|---|---|
| Model | 338S00817 |
| Category | Mobile Phone ICs |
| Compatibility | iPhone 13 series |
| Supported Devices | iPhone 13, iPhone 13 mini, iPhone 13 Pro, iPhone 13 Pro Max |
| Technology | Wireless charging IC |
Common Repair Uses
- ✓Restoring wireless charging on iPhone 13 series devices where wired charging works
- ✓Board-level replacement after the wireless charging section fails
- ✓Isolating a wireless charging fault from a wired charging fault during diagnosis
- ✓Reflow and reattachment work during charging-section repair
Compatible Devices
- ✓iPhone 13 series
- ✓iPhone 13
- ✓iPhone 13 mini
- ✓iPhone 13 Pro
- ✓iPhone 13 Pro Max
FAQ
What is the model of this IC?
Which iPhone models use this IC?
Is this the USB charging IC?
Who should use this product?
Does this IC fix wired charging problems on iPhone 13?
Does replacing this IC need a hot air station?
Related products
339S00108 WiFi IC For iPad Air iPad Pro 9.7 Replacement
In stock
343S0694 Touch IC U2402 iPhone 6 and 6 Plus Touch Black IC
In stock
PM8916 Power Control IC – Qualcomm PMIC for MSM8916 Boards
In stock
U2 Charging iPhone 8, iPhone 8 Plus, iPhone X Chip – 1612A1
In stock


