B310 CRYSTAL IC – Samsung Keypad Network Crystal

₨ 250

Samsung Keypad Network Crystal Fix

The B310 CRYSTAL IC is a replacement network crystal for Samsung keypad phones that show no service, weak signal, or a SIM not detected warning. It carries the D267 marking and comes in black or silver package finishes. Each unit ships brand new and factory tested, so you can restore network registration at board level without sourcing a donor phone. Match the footprint and pad layout to your target board before reflow, and confirm SIM registration on a live network after the swap. This part suits technicians handling secondhand Samsung B-series and E-series keypad handsets in busy repair queues.

10 People watching this product now!
Description

The B310 CRYSTAL IC targets one of the most frequent network complaints on Samsung keypad phones: a handset that keeps searching for a carrier and never locks on. When a customer reports no service, a SIM that is not detected, or a signal that drops in and out, check the crystal in the RF section before you spend time on software. A cracked joint or a failed crystal breaks the reference clock that the baseband needs to lock onto the carrier signal. No flash file, IMEI repair, or network unlock fixes that physical fault, so a component swap is the only route to a working phone. Start your diagnostic chain by confirming that the SIM reads correctly on a known-good handset. Then test the antenna flex and the antenna connector, because damage in that path produces identical symptoms and will survive a crystal replacement. Once the fault points to the board, lift the crystal with controlled hot air at a moderate setting, keeping airflow low enough to protect the neighboring passives and the solder mask. Clean the pads with flux and braid until they are flat and free of residue. Place the B310 CRYSTAL IC with the pad orientation matched to your board, then check alignment under a microscope or a strong loupe before reflow. A misaligned crystal either fails to make contact or bridges to an adjacent pad and creates a fresh short, so take the extra minute to confirm position. The store lists this part under the D267 marking, which appears on several variants that include D267K, D267F, and D267H. The package finish may be black or silver depending on the production batch. Both finishes perform the same job, so match the footprint and pad layout of your target board rather than the color. For compatibility, the listing names the Samsung B310, B310E, B110, E1200, E1200Y, T1200, B100, and B313 keypad models. Samsung reused similar RF sections across several keypad generations, which means two models with similar names can still differ in board layout. Verify the revision of your board before you solder, and do not assume that a match on one model covers the whole family. After the swap, test SIM registration on a live network, since a bench continuity check alone does not confirm that the phone registers with the carrier. Set expectations with the customer as well. If the antenna path or the connector has failed, this crystal will not restore service, and you should quote the additional repair before you start. For a fast turnaround, keep a few units on the shelf. Secondhand Samsung keypad phones keep circulating through local markets, and a no-network complaint arrives often enough to justify the stock. Pair the part with quality flux, a fine desoldering wick, and a hot air station with low, controlled airflow, and you will complete most of these repairs in a single sitting without waiting on a donor board.

Additional information
Weight0.1 kg
Q & A
Please login to post questions

Key Features

  • Brand new, factory-tested network crystal IC
  • Direct fix for no-service and no-network faults on supported models
  • Compatible across the Samsung B310/B110/E1200 keypad phone family
  • Available in black and silver package variants
  • Compact SMD form factor for precise motherboard-level rework
  • Restores network registration without a full board replacement
  • Suited for hot air or fine-tip iron reflow on repair benches
  • Reliable stock item for high-frequency keypad phone network complaints

Specifications

Brand EntityGeneric compatible replacement (no brand stated)
Product EntityB310 CRYSTAL IC, network crystal IC
Technology EntityRF network crystal, baseband reference clock component
Compatible Device EntitiesSamsung B310, B310E, B110, E1200, E1200Y, T1200, B100, B313
Repair Process EntityMotherboard-level SMD crystal desoldering and reflow
Industry EntityMobile repair, GSM network fault diagnosis, Pakistan repair market

Common Repair Uses

  • No-service and no-network fault repair on Samsung keypad phones
  • SIM not detected troubleshooting after antenna path checks
  • Network searching and signal dropout diagnosis
  • RF front-end crystal replacement during motherboard-level work
  • Motherboard-level SMD reflow and pad cleaning
  • Confirming the antenna flex and connector before committing to a crystal swap

Compatible Devices

  • Samsung B310
  • Samsung B310E
  • Samsung B110
  • Samsung E1200
  • Samsung E1200Y
  • Samsung T1200
  • Samsung B100
  • Samsung B313

FAQ

What is the product name?
The product name is B310 CRYSTAL IC.
What is the brand of this product?
It is a compatible replacement crystal IC, not a Samsung-branded original part.
What is the model of this product?
The component carries the D267 marking, with D267K, D267F, and D267H variants.
What is this product used for?
It repairs no-service, weak-signal, and SIM-not-detected faults on Samsung keypad phones.
Which devices are compatible with this product?
It is compatible with the Samsung B310, B310E, B110, E1200, E1200Y, T1200, B100, and B313 keypad phones.
Who should use this product?
It suits mobile repair technicians, repair shops, service centers, and professional users.
Will the black or silver variant change performance?
Both finishes perform the same function, so match the footprint and pad layout of your board instead.
Will this crystal fix a no-service fault caused by a damaged antenna?
No. This crystal addresses reference clock failure, not physical damage to the antenna path.