ICFRIEND Easy UFS 6-in-1 Socket for Easy JTAG Plus Box

₨ 75,000

Six-Piece UFS Socket Kit for Easy JTAG Plus Box

This ICFRIEND Easy UFS 6-in-1 kit gives your Easy JTAG Plus Box socket-based access to UFS chips in BGA153, BGA254 and BGA297 packages. The set bundles an ISP cable adapter, a UFS 4-in-1 key adapter, an EMMC-UFS-254 adapter, an NB-UFS 4-in-1 socket and four flash memory adapters. One kit covers the main UFS footprints you meet on a service bench. Chips stay socketed rather than desoldered, so read and write work stays faster and cleaner. Always confirm the port appears in Device Manager before you start a session.

In stock

14 People watching this product now!
Description

UFS BGA153, BGA254 and BGA297 Socket Kit for Easy JTAG Plus Box

The ICFRIEND Easy UFS 6-in-1 socket kit extends your Easy JTAG Plus Box to UFS memory in BGA153, BGA254 and BGA297 packages. Each socket holds the chip without soldering, so you can read and write storage while it sits on the board. For a technician handling UFS-based boards regularly, this removes a slow and risky step from the workflow. The kit covers three package families in one set, so your shop avoids buying separate adapters for each footprint.

Package Coverage and Kit Contents

The set includes an ISP cable adapter, an Easy JTAG UFS 4-in-1 key adapter, an EMMC-UFS-254 adapter, an NB-UFS 4-in-1 socket adapter and four flash memory adapters. The NB-UFS socket handles UFS BGA153, uMCP BGA254 and uMCP BGA297 chips, which covers most UFS footprints you will encounter in mobile repair. The EMMC-UFS-254 adapter extends the kit into BGA254 work. The four flash memory adapters round out the set. Confirm the body size and package marking of each chip against the adapter before you seat it, because a misaligned chip produces an unstable read.

Where the Kit Fits in Your Workflow

A UFS job starts with identifying the package and confirming the chip type matches the socket. Next, connect the box, select the matching socket in your software, and run the read or write function. Socket-based access suits dead phone boards where the UFS chip is intact but the handset will not boot, since you can pull data or reprogram storage without a working route through the device. On the bench, the kit sits between board-level diagnosis and the programming step. It fits best in a workshop that already handles ISP and eMMC work, because the same discipline of clean contact and correct orientation applies across both.

Compatibility Scope and Limits

The kit is built for the Easy JTAG Plus Box. Its verified scope is at the package level: BGA153, BGA254 and BGA297 UFS chips. Device-level fit depends on the chip package and marking, not on the phone brand, so check the chip before you assume support. Confirm in your box software that the target chip appears as supported before you commit to a full read or write. Treat the package match as the first gate and the software check as the second.

Connection Checks Before You Start

UFS sessions depend on a clean, verified link between the box and the chip. Before any read or write, open Device Manager and confirm the port shows as 9008. If the port does not appear, the box cannot establish a connection, and continuing risks both time and the board. Use a multimeter to check contact and continuity before you power the board, since a meter catches lifted contacts that visual inspection misses. Make this check a standard step on every job rather than an optional one.

Technical Notes for Bench Use

Socket-based work keeps the chip reusable, which matters when you run repeat reads or verify a write. Seat the chip squarely, without forcing it into the socket, and check its orientation against the package outline each time. Keep the socket free of debris and residue before you seat a chip, because contamination can break contact on the next session. Work on live boards only after you have verified the connection, and log which socket and package you used so the next technician can repeat the setup.

Who Should Use This Kit

This kit suits repair shops running Easy JTAG Plus Box work, service centres handling UFS-based storage, and technicians who want one set covering three BGA footprints. The work assumes solid board-handling experience, since precise contact and live boards leave little room for error. Technicians new to UFS work should practise on a spare board before running client devices. The kit rewards a methodical bench process: verify the port, verify the package, then run the job.

Additional information
Weight0.6 kg
Q & A
Please login to post questions

Key Features

  • Six-piece kit covering UFS BGA153, BGA254 and BGA297 packages
  • Includes an ISP cable adapter for ISP-based access
  • NB-UFS 4-in-1 socket covers BGA153, uMCP BGA254 and uMCP BGA297
  • EMMC-UFS-254 adapter included for BGA254 work
  • Four flash memory adapters included in the set
  • Built for use with the Easy JTAG Plus Box
  • Socket-based workflow, no desoldering needed for read and write
  • Suits technicians who need one kit for three UFS footprints

Specifications

BrandICFRIEND
ModelEasy UFS 6 in 1
CategoryUFS Socket Adapter Kit
CompatibilityEasy JTAG Plus Box
TechnologyUFS BGA153, uMCP BGA254, uMCP BGA297 socket packages

Common Repair Uses

  • Reading and writing UFS data on BGA153 chips through the box
  • Programming uMCP BGA254 and BGA297 chips off the board
  • ISP-based access using the included ISP cable adapter
  • Data recovery on dead phone boards with an intact UFS chip
  • Confirming a live session on port 9008 before any data work

Compatible Devices

  • Chipset-family and package scope only; no device-level list verified
  • UFS BGA153 package chips
  • uMCP BGA254 package chips
  • uMCP BGA297 package chips
  • BGA254 eMMC/UFS work via the included EMMC-UFS-254 adapter
  • Easy JTAG Plus Box (required host)

FAQ

What is the product name?
The product name is ICFRIEND Easy UFS 6-in-1 Socket Kit.
What is the brand of this product?
The brand of this product is ICFRIEND.
What is the model of this product?
The model of this product is Easy UFS 6 in 1.
What is this product used for?
This product is used for socket-based read and write access to UFS chips in BGA153, BGA254 and BGA297 packages through the Easy JTAG Plus Box.
Which devices are compatible with this product?
This product is compatible with UFS BGA153, uMCP BGA254 and uMCP BGA297 chip packages when used with the Easy JTAG Plus Box.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
Does this kit need the Easy JTAG Plus Box to work?
Yes. The kit is designed for use with the Easy JTAG Plus Box and does not operate on its own.
How do I know the UFS connection is established before a read or write?
Open Device Manager and confirm the port shows as 9008. If the port does not appear, the box cannot establish a connection with the chip.