UFI eMMC EMCP BGA221 Socket 221-FBGA

₨ 4,500

221-FBGA eMMC and EMCP Socket

This UFI eMMC EMCP BGA221 socket seats 221-ball storage chips for chip-off reading, writing, and data backup on the UFI Box. It suits repair benches that handle eMMC and EMCP packages in the 221-FBGA footprint. Confirm your chip’s ball count before you seat it, because the footprint must match the socket. The socket holds the chip steady during each read, so you can verify results with a second pass. Pair it with your microscope, hot air station, and UFI Box setup for a repeatable storage workflow.

In stock

15 People watching this product now!
Description

BGA221 eMMC Socket for UFI Box Chip-Off Work

This BGA221 eMMC socket for UFI box gives your bench a fixed seat for 221-FBGA storage chips. Chip-off jobs depend on stable contact and a clear pin reference, and this socket is built around both. It targets eMMC and EMCP packages in the 221-ball footprint, which is one of the standard formats you will meet on handset storage. Pairing it with the UFI Box lets you read, write, and back up user data without powering up the phone.

Package Match and Chip Identification

The socket accepts chips in the 221-FBGA package, which means 221 solder balls arranged in a fine grid. EMCP is a different structure from standard eMMC: it stacks eMMC storage with mobile DRAM inside one package, so the chip you lift may carry more than storage. Read the package marking and count the balls under a microscope before you seat anything. A mismatched footprint gives false reads or no response at all. Confirm the layout matches the socket before you run any command in the UFI Box software, since a wrong seat costs more time than a quick check.

Bench Workflow Fit

In a chip-off routine, you remove the eMMC from the board with hot air or a reballing setup, clean the pads, and place the chip in the socket. The UFI Box software then reads the user area or writes a new image. Keeping the chip on a socket instead of re-soldering it between attempts reduces repeated heat exposure on both the chip and the board. That matters when you run several reads to confirm a backup matches. Plan your heat steps with a hot air station, and keep the pads flat and clean before you lift the chip so the reballed balls seat evenly.

Handling and Shop Use

A dead phone that still shows a storage fault often needs its storage chip checked before any board-level repair continues. When a shop replaces a damaged eMMC, the socket lets you confirm data on the old chip before you commit the board to a new one. Technicians who handle boot loop issues or charging issues on the same bench can use one socket for every chip in the 221-FBGA package. Clean the contacts with isopropyl alcohol and a soft brush after each job, because flux residue causes intermittent reads that look like chip faults. Seat the chip with pin 1 aligned to the socket marker, and avoid forcing it. Keep the socket with your eMMC programmers, a multimeter, and a microscope so the full storage workflow stays on one bench, and store it covered when not in use.

Additional information
Weight0.1 kg
Q & A
Please login to post questions

Key Features

  • Accepts 221-FBGA (BGA221) eMMC and EMCP chips
  • Designed as a test adapter for the UFI Box
  • Supports chip-off reading and writing workflows
  • Fixed chip seat for repeatable contact between reads

Specifications

CategoryProgrammer Adapters
CompatibilityUFI Box
Supported DeviceseMMC and EMCP chips in BGA221 (221-FBGA) package
TechnologyeMMC / EMCP storage

Common Repair Uses

  • Chip-off reading, writing, and backup of storage chips in the 221-FBGA package
  • Chip-off reading of eMMC and EMCP user data
  • Writing a new image to a replacement eMMC or EMCP chip
  • Backing up user data before a storage chip swap
  • Verifying a second read against the first to confirm data integrity
  • Storage chip testing during board-level repair

Compatible Devices

  • eMMC and EMCP chips in the 221-FBGA package, used with the UFI Box (package-based scope, not device-specific)
  • eMMC chips in BGA221 (221-FBGA) package
  • EMCP chips in BGA221 (221-FBGA) package
  • UFI Box test setup

FAQ

What is the product name?
The product name is UFI eMMC EMCP BGA221 Socket 221-FBGA.
What is this product used for?
This product is used for chip-off reading, writing, and backing up eMMC and EMCP storage chips in the 221-FBGA package on the UFI Box.
Which devices are compatible with this product?
This product is compatible with eMMC and EMCP chips in the 221-FBGA (BGA221) package, used with the UFI Box.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
Which eMMC packages does this socket support?
This socket supports 221-FBGA (BGA221) eMMC and EMCP chips only. Count the ball layout under a microscope before you seat the chip.
Does this socket work with the UFI Box?
Yes, this socket is designed as a BGA221 test adapter for the UFI Box.