One-Stop 806 60W Adjustable Soldering Iron with 5 Tips
₨ 1,300
60W Adjustable Soldering Iron for Repair Benches
The One-Stop 806 is a 60W adjustable temperature soldering iron with a built-in temperature controller and five included tips. You set the heat to match the job instead of running one fixed temperature on every joint. That control matters when you move between charging port pads, battery connector points, ground connections, and jumper wire repairs on a mobile mainboard. The five-tip package lets you match tip shape to pad size without a separate purchase. Technicians who handle hardware fault jobs every day get a dependable second iron for general bench work, alongside a hot air station for ICs. Mechanicpk supplies the One-Stop 806 to repair shops and service centers across Pakistan.
In stock
One-Stop 806 60W Adjustable Temperature Soldering Iron for Mobile Repair
The One-Stop 806 is a 60W adjustable temperature soldering iron built around a temperature controller and a five-tip package. A repair bench rarely runs on one heat setting. A charging port pad, a thick ground track, and a thin flex connector pad each need different thermal handling, and a fixed-temperature iron forces you to compromise on all three. The 806 puts that adjustment in your hands, so you control how much heat reaches the board.
Temperature Control and Power Delivery
Adjustable temperature separates a repair iron from a basic hobby iron. When you lower the setting, you protect small pads and lifted tracks on a dead phone that already suffered a previous repair attempt. When you raise it, you wet large ground planes and shield cans faster, which cuts the dwell time that damages nearby components. The 60W rating gives you enough power to recover heat quickly after you touch a heavy joint, so your next joint does not start cold. You keep the iron on the pad for less time, and the board takes less thermal stress.
Where It Fits in the Mobile Repair Workflow
The 806 handles the wire-and-pad side of board-level work: jumper lagana on broken tracks, charging issue repairs at the connector, battery connector points, and speaker or microphone lead wires. It works well for tinning pads before you seat a replacement part and for cleaning excess solder after a rework. For IC change karna and fine-pitch work, pair it with a hot air station and a microscope. Use the iron for the pads and wires, and use hot air for the chips. Technicians who also run reballing kits and PCB holders will find the 806 covers the manual soldering steps around those tools.
Five-Tip Package and Bench Use
Five included tips let you switch shape for the pad in front of you. Use a finer tip on small pads and connector leads, and a broader tip on shield frames and ground points. Swapping tips costs seconds and saves you from forcing one tip into a job it does not suit. Shops that keep several benches running benefit from the package price, because every technician gets a full tip set from day one.
For buyers comparing options, the 806 sits in the entry-to-mid tier of Mechanicpk’s soldering range. If you outgrow it, step up to a full soldering station with a stand and digital display, and keep the 806 as your spare or your field-repair iron. Pair it with a multimeter for continuity checks before and after each joint, so you confirm every repair instead of guessing.
Mechanicpk stocks the One-Stop 806 for technicians, repair shops, and service centers in Pakistan who need a controllable 60W iron for daily hardware fault work.
| Weight | 0.3 kg |
|---|
Key Features
- ✓60W power rating for fast heat recovery between joints
- ✓Adjustable temperature controller
- ✓Five tips included in the package
- ✓Suits manual soldering and pad work
- ✓Pairs with hot air stations for IC rework
- ✓Useful as a main iron or a spare bench iron
- ✓Fits mobile repair, PCB repair, and general electronics work
- ✓Supplied by Mechanicpk for Pakistani repair shops and service centers
Specifications
| Brand | One-Stop |
|---|---|
| Model | 806 |
| Category | Soldering Equipment / Soldering Irons |
| Compatibility | Universal soldering use — not device-specific |
| Technology | Adjustable temperature controller |
| Power Rating | 60W |
Common Repair Uses
- ✓Manual soldering and pad work in mobile repair
- ✓Jumper lagana on broken tracks
- ✓Charging port resoldering for charging issue repairs
- ✓Battery connector pad repair
- ✓Tinning pads before part replacement
- ✓Cleaning excess solder after rework
- ✓Speaker and microphone wire soldering
- ✓Shield frame and ground point soldering
- ✓Cable and lead repair on the bench
Compatible Devices
- ✓Universal — works on any phone mainboard, flex, and wire joint within a soldering iron’s capability, not tied to specific models or chipsets
- ✓Android phone mainboards (Samsung, Oppo, Vivo, Infinix, Tecno)
- ✓iPhone mainboards (manual pad and wire work only)
- ✓Charging port and sub-board connectors
- ✓Battery connector pads
- ✓Speaker and microphone lead wires
- ✓Shield frames and ground points
- ✓Jumper wire repairs on broken tracks
- ✓Tablets and other small electronics boards
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
Can the One-Stop 806 handle IC change karna on mobile boards?
Which tips should I use on small phone pads versus ground points?
Related products
Aifen 3310 Pro 33V/10A 330W Adjustable DC Power Supply
In stock
RELIFE RL-004SA silicone pad – Anti-slip
In stock
Sunshine M1 Pro Intelligent Height Adjustable Repair Table (72cm to 117cm)
In stock
YOUKILOON SAM EDL V2 Cable For Samsung USB EDL Download Mode Cable
In stock



