Back to products
Mechanic RS180 Max Camera Cleaner Liquid (500ML)
Mechanic RS180 Max Camera Cleaner Liquid (500ML) Original price was: ₨ 5,500.Current price is: ₨ 5,000.

2UUL FD30 Max Clean Full Size Soldering Tip Cleaning Dock

₨ 1

Dual-Action Tip Cleaning Dock

The 2UUL FD30 Max Clean Full Size Soldering Tip Cleaning Dock gives your bench a compact tip-care station that pairs a gold coiled wire with a moistened sponge. The high-temperature-resistant silicone housing holds both cleaning methods in one place, so you wipe oxides and leftover solder paste off full-size soldering tips before and after every joint. Technicians doing mobile phone repair, board-level electronics work, and general soldering get a dual-action soldering tip cleaning dock that stays out of the way and keeps tips wetting properly. Mechanicpk supplies it to Pakistani repair shops that want a reliable consumable accessory beside their soldering stations.

Out of stock

20 People watching this product now!
Description

Dual-Action Soldering Tip Cleaning Dock for Full-Size Tips

The 2UUL FD30 Max Clean Full Size Soldering Tip Cleaning Dock is a soldering tip cleaning dock that packs two cleaning methods into one silicone body: a gold coiled wire and a moistened sponge. Oxide film and burnt flux on a hot tip block heat transfer and make solder ball up instead of flow. That problem shows up fastest on fine board work, where one weak joint on a charging port, a connector, or a small IC sends the phone back to your bench as a repeat repair. This dock keeps a cleaning method within reach of your iron, and 2UUL specifies it for full-size soldering iron tips. Mechanicpk stocks it for Pakistani repair shops that treat tip care as part of every job, not an afterthought.

How the Dual-Action Cleaning System Works

The cleaning system combines a built-in metal coil with a sponge you moisten before use. You push the hot tip into the gold coiled wire to strip oxides and leftover solder paste, then you wipe it across the damp sponge when the tip needs a fresh surface. Having both methods in one dock lets you choose per job instead of committing to a single habit. A quick coil pass suits a tip between two joints on the same board. A sponge wipe suits the moment you finish a repair and want a clean tip before you park the iron. Keep the sponge damp rather than soaked, and re-tin the tip after cleaning so it rests on the stand with a thin solder coat. The manufacturer listing credits this cleaning action with removing oxides and residual solder paste, which extends tip life. That effect adds up fast in a shop where one iron runs through dozens of repairs every week.

Why a Soldering Tip Cleaning Dock Matters on Your Repair Bench

A dirty tip does not announce itself. You notice it when solder refuses to wet a pad, when a reflowed joint turns grainy, or when you raise the temperature to compensate. Higher temperature then punishes the tip plating and the board underneath. Regular cleaning with a soldering tip cleaning dock costs far less than replacing tips early. When you handle a dead phone with a charging issue or a hardware fault that needs a connector swap, a clean tip finishes the job in fewer passes and puts less heat into the PCB. The silicone housing resists high temperatures, so tips coming straight off the iron do not threaten the dock itself. At 108 g net weight with a compact footprint, it fits a crowded bench without pushing aside your soldering station, PCB holder, or microscope arm. You can also keep a second dock at a separate bench position, so every technician in the shop cleans tips at arm’s length.

Where It Fits in a Mobile Repair Workflow

Tip cleaning sits at the start and end of almost every soldering task. Before an IC change, you clean the tip so it transfers heat evenly into the pad. During charging port or connector replacement, you wipe residue between passes so each joint starts with a bright tip. After the job, you clean and re-tin the tip before it cools and oxidizes. The dock pairs with the rest of your bench: soldering stations supply the controlled heat, hot air stations lift the components, reballing kits and PCB holders support the board, and a microscope and multimeter confirm the result. Browse those categories at Mechanicpk to build out a complete soldering corner. Electronics repair users and DIY soldering users get the same benefit, since the dock is not tied to a specific phone model, chipset, or brand. It works as a consumable soldering tip cleaner that you place beside any iron that takes a full-size tip.

Additional information
Weight0.108 kg
Q & A
Please login to post questions

Key Features

  • Full-size soldering tip compatibility, per the manufacturer listing
  • Dual-action cleaning with a built-in gold coiled wire and a moistened sponge
  • Removes oxides and residual solder paste from soldering tips
  • Helps extend soldering tip life through regular cleaning
  • High-temperature-resistant silicone housing
  • Compact body that fits a crowded soldering workbench
  • Suited to quick cleaning before and after soldering tasks
  • Lightweight at 108 g net weight

Specifications

Brand Entity2UUL
Product Entity2UUL FD30 Max Clean Full Size Soldering Tip Cleaning Dock
Technology EntityDual-action cleaning (gold coiled wire plus moistened sponge), high-temperature-resistant silicone housing
Compatible Device EntitiesFull-size soldering iron tips; universal, not phone-model-specific
Repair Process EntitySoldering and rework tip maintenance (IC change, charging port and connector replacement)
Industry EntityMobile phone repair, electronics repair, soldering accessories

Common Repair Uses

  • Cleaning oxides from the tip before soldering
  • Removing residual solder paste from the tip after soldering
  • Quick tip cleaning between joints during mobile phone repair
  • Tip maintenance during IC change work
  • Tip maintenance during charging port and connector replacement
  • Daily tip care on electronics repair benches
  • Cleaning tips in DIY soldering projects

Compatible Devices

  • Universal accessory for full-size soldering iron tips. It is not phone-model-specific.
  • Full-size soldering iron tips
  • Soldering irons used for mobile phone repair
  • Soldering irons used for general electronics repair
  • Soldering irons used for DIY soldering
  • Any bench setup that needs a compact tip cleaning dock

FAQ

What is the product name?
The product name is 2UUL FD30 Max Clean Full Size Soldering Tip Cleaning Dock.
What is the brand of this product?
The brand of this product is 2UUL.
What is the model of this product?
The model of this product is FD30 Max Clean.
What is this product used for?
This product is used for cleaning oxides and residual solder paste from full-size soldering tips with a metal coil and a moistened sponge.
Which devices are compatible with this product?
This product works with full-size soldering iron tips. It is a universal accessory and is not tied to a specific phone model or brand.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
Which cleaning methods does the 2UUL FD30 Max Clean dock include?
The dock includes two cleaning methods: a built-in gold coiled metal wire and a sponge that you moisten before use.
Is the dock body safe to use with a hot soldering iron?
The housing is made of high-temperature-resistant silicone, which the manufacturer lists as safe for use with soldering tasks.