MOORC JTAG-ISP All-in-One Adapter for eMMC Boxes

₨ 2,500

MOORC JTAG ISP Adapter for Multi-Box eMMC Repair

The MOORC JTAG ISP adapter set extends the JTAG and eMMC box you already run on your bench. It combines JTAG, ISP, and direct eMMC BGA connection in one multi-board kit, so you switch between boxes without rebuilding your wiring. Supported tools include Z3X Easy Jtag, Easy Jtag Plus, ATF, Riff, Riff 2, Medusa, Medusa Pro, GPG, and ORT. You use it for ISP reads and writes, partition table repair, FRP clearing, and chip-off work on a dead phone or a boot loop issue. Match the board to your box model before you order, because each board targets a specific tool family.

In stock

14 People watching this product now!
Description

[H2] MOORC JTAG ISP Adapter for eMMC Repair on Easy Jtag, Riff and Medusa Boxes [P] The MOORC JTAG ISP adapter set gives your eMMC box one interface for JTAG pinouts, ISP wiring, and direct BGA memory access. Instead of keeping a separate adapter for every tool, you mount the board that matches your box and work through a dead phone, a boot loop issue, or a hang on logo fault with the same kit. Mechanicpk supplies the MOORC JTAG-ISP All-in-One Adapter for technicians who run Easy Jtag, Easy Jtag Plus, ATF, Riff, Riff 2, Medusa, Medusa Pro, GPG, or ORT. The set is an accessory, not a programmer, so it extends the capability of the box you already own and does not replace it. [H3] How the multi-board set maps to your box [P] Each board in the set targets a tool family. The main board handles JTAG and ISP connections for Easy Jtag, ATF, and Medusa. A dedicated Medusa Pro board covers JTAG, ISP, and eMMC connections for that box. A third board serves the E-Mate, Easy Jtag 2, Riff 2, GPG, and ORT family. An EMMC All in BGA board connects memory chips directly once you remove them from the motherboard. Some editions also ship BGA-221, BGA-169/153, and BGA-162/186 adapters, so check the package contents of the edition you order. Confirm your box model against the board list first, because a mismatched board gives you no connection. [H3] ISP and direct eMMC workflow on the repair bench [P] In ISP mode, you leave the eMMC on the motherboard and wire the box to the ISP test points. You then detect the chip in your box software and read or write data without chip-off. This approach suits a dead after flash phone where the board is otherwise healthy. When ISP pads are damaged or unreachable, you desolder the eMMC and seat it in the matching BGA adapter for a direct read or write. The adapter also carries JTAG outputs, so you can use it on phones that support JTAG pinouts through your box. Once the box detects the chip, you can write firmware, repair the GPT partition table, repair NVRAM, clear FRP, or restore a saved dump. Use stable soldering and good ISP wire quality, because a loose connection causes detection errors that look like a dead chip. [H3] Where this adapter fits in your repair setup [P] This adapter sits in the JTAG and eMMC ISP tools category, directly between your programmer box and the phone or chip. It pairs with ISP pinout references, eMMC programmers, and UFS adapters in the same workflow. For chip-off jobs, you also need a hot air station, a soldering station, and a microscope for clean ISP pad work. This kit covers eMMC and JTAG scope, so UFS phones need a separate UFS adapter for your box. If you start with Easy Jtag or Medusa and move to Easy Jtag Plus or Riff 2, the multi-board design lets you keep using the same kit. That makes it a practical first adapter purchase for a growing repair shop. [/H2]

Additional information
Weight0.9 kg
Q & A
Please login to post questions

Key Features

  • Multi-board set covering several JTAG and eMMC box families
  • JTAG and ISP connection on the main board
  • Dedicated Medusa Pro board
  • E-Mate, Easy Jtag 2, Riff 2, GPG, and ORT board
  • EMMC All in BGA board for direct memory connection
  • BGA-221, BGA-169/153, and BGA-162/186 adapters on supported editions
  • Programming and JPIN outputs
  • Extends the box you already own

Specifications

BrandMOORC
ModelJTAG-ISP All-in-One Adapter
CategoryJTAG & eMMC ISP Tools
CompatibilityZ3X Easy Jtag, Z3X Easy Jtag Plus, ATF, Riff, Riff 2, Medusa, Medusa Pro, GPG, ORT
TechnologyJTAG, ISP, direct eMMC BGA connection (BGA-221, BGA-169/153, BGA-162/186 on supported editions)

Common Repair Uses

  • ISP and direct eMMC workflows on supported boxes.
  • ISP read and write on eMMC without chip-off
  • Firmware write for a dead phone or dead after flash fault
  • GPT partition table repair
  • FRP lock removal through eMMC access
  • NVRAM repair
  • Restoring a saved eMMC dump
  • Direct eMMC read and write in a BGA adapter after chip-off
  • JTAG connection on phones that support JTAG pinouts

Compatible Devices

  • Verified at box level (JTAG/eMMC programmer boxes), not phone-model level.
  • Z3X Easy Jtag
  • Z3X Easy Jtag Plus
  • ATF
  • Riff
  • Riff 2
  • Medusa
  • Medusa Pro
  • GPG and ORT

FAQ

What is the product name?
The product name is MOORC JTAG-ISP All-in-One Adapter.
What is the brand of this product?
The brand of this product is MOORC.
What is the model of this product?
The model of this product is JTAG-ISP All-in-One Adapter.
What is this product used for?
This product is used for connecting JTAG and eMMC boxes to a phone through JTAG, ISP, or a direct eMMC BGA adapter.
Which devices are compatible with this product?
This product is compatible with Z3X Easy Jtag, Easy Jtag Plus, ATF, Riff, Riff 2, Medusa, Medusa Pro, GPG, and ORT boxes.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
Does the MOORC JTAG ISP adapter work with Easy Jtag Plus?
Easy Jtag Plus is listed among the supported boxes. Use the board in the set that targets the E-Mate, Easy Jtag 2, Riff 2, GPG, and ORT family, and confirm the match with your box model before ordering.
Does this adapter support UFS phones or only eMMC?
The verified scope covers JTAG, ISP, and eMMC BGA connection, including BGA-221, BGA-169/153, and BGA-162/186 on supported editions. UFS phones need a separate UFS adapter for your box.