RELIFE RL-0001 5-Inch High Precision Diagonal Cutter

₨ 1,100

RELIFE RL-0001 5-Inch Diagonal Precision Cutter

The RELIFE RL-0001 gives you a 5-inch stainless steel diagonal cutter built for fine electronics work. Its hardened cutting edge and 20° head trim component leads, jumper wire, insulation sleeves, and nylon cable ties cleanly, and the return spring lets you cut one-handed. The anti-slip handle keeps your grip steady through long repair sessions, while the compact 135 × 53 × 14 mm body reaches tight board areas on phones, tablets, and PCs. Keep the RL-0001 on your repair bench next to your soldering station and tweezers, and every jumper job gets a clean, controlled cut.

In stock

13 People watching this product now!
Description

RELIFE RL-0001 Precision Cutter for Mobile Repair Benches

The RELIFE RL-0001 precision cutter gives you a 5-inch diagonal cutting plier for the fine trimming that fills a mobile repair bench every day. Its slim head, 20° working angle, and hardened stainless steel edge let you clip component leads, jumper wire, and insulation sleeves without crushing the surrounding board area. RELIFE builds the tool for phone, tablet, and PC repair, and the compact 135 mm body sits easily beside your soldering station and hot air station. If your shop handles jumper work, cable prep, and general bench cleanup all day, the RL-0001 covers those cuts with a sharp, controlled bite.

Cutting Geometry and Build Quality of the 5-Inch Head

The RL-0001 uses a diagonal cutting head, so the blades meet at an angle and let you cut flush against a PCB surface or a soldered joint. RELIFE hardens the cutting edge through a quenching process, which keeps the bite sharp through repeated cuts on copper wire, component leads, and nylon cable ties. The body uses stainless steel with good toughness, and the 20° design gives your wrist a natural cutting angle during long sessions. A return spring opens the jaws after each cut, so you operate the tool with one hand and keep the other hand on your tweezers or board. The anti-slip handle holds firm when your fingers carry flux or sweat. At 135 × 53 × 14 mm and around 80 g gross weight, the plier stays light enough for precision work and slim enough to reach between tall components. Because it never needs batteries, power, or calibration, the tool works the moment you pull it from the drawer.

Precision Diagonal Cutter for Mobile Repair Workflows

A precision diagonal cutter for mobile repair earns its place when you rework a dead phone or chase a charging issue on a crowded board. During IC change karna jobs, you trim jumper wire to length after jumper lagana across a broken track, and you clip long component leads flush before you solder. When you rebuild a display flex or battery connector with replacement wire, the RL-0001 trims the excess without tearing the insulation sleeve. Technicians who handle hardware fault diagnosis also use it to cut cable ties, tape, and thin plastic strips while they open and re-route harnesses. The cutter also handles soldering wick, thin copper cable, and aluminum cable, so you do not need a heavy side cutter for small tasks. Keep the plier for light work only; hard steel pins, screws, and thick shielding frames damage the edge, and a damaged edge costs you cut quality on every later job.

Bench Placement and Related RELIFE Tools

Keep the RL-0001 in the same reach zone as your tweezers, flux, and soldering iron, because you grab it dozens of times per repair. It pairs naturally with a soldering station for lead trimming, a hot air station for rework, a microscope for inspecting the cut, and a multimeter for confirming the jumper path afterward. A PCB holder frees your second hand, which matters when you cut near fragile pads. Browse the hand tools and pliers category at Mechanicpk to find matching tweezers and opening tools. For work the 5-inch diagonal head cannot reach, step up to the RELIFE RL-112B 90° angled cutting pliers, which target camera ring removal on iPhones, or add the RL-113 diagonal cutter pliers as a second fine-lead option. The RL-0001 stays the general-purpose cutter you reach for first. Store it with the jaws closed in a tool tray so the edges stay clear of tweezer tips and screwdriver bits, and wipe flux residue off the jaws after soldering sessions to keep the spring and joint moving freely.

Additional information
Weight0.12 kg
Q & A
Please login to post questions

Key Features

  • 5-inch (125 mm) diagonal cutting head for precise trimming
  • Stainless steel body with good toughness
  • Hardened, quenched cutting edge for sharp cuts
  • 20° working angle for a comfortable wrist position
  • Return spring for one-handed operation
  • Anti-slip ergonomic handle for long repair sessions
  • Compact 135 × 53 × 14 mm body reaches tight board areas
  • Light 80 g gross weight reduces hand fatigue

Specifications

BrandRELIFE
ModelRL-0001
CategoryPrecision Pliers / Hand Tools
CompatibilityUniversal — not device-specific
MaterialStainless steel
Dimensions135 × 53 × 14 mm
Weight80 g gross (70 g net)

Common Repair Uses

  • Trimming jumper wire to length after jumper lagana on broken tracks
  • Clipping excess component leads after soldering
  • Cutting insulation sleeves on replacement wire repairs
  • Removing cable ties and tape during harness re-routing
  • Cutting replacement copper wire for charging or battery connector fixes
  • Trimming soldering wick after desoldering work
  • Trimming small plastic strips and thin plastic parts
  • Preparing wire leads for test and bench connections

Compatible Devices

  • Universal hand tool — works on any phone, tablet, or PC board regardless of brand
  • Smartphone motherboards (brand-independent)
  • Tablet repair boards
  • PC and laptop repair work
  • Through-hole component leads
  • Insulated copper wire and cable
  • Aluminum cable
  • Nylon cable ties and insulation sleeves
  • Soldering wick and tape

FAQ

What is the product name?
The product name is RELIFE RL-0001 5-Inch High Precision Diagonal Cutter.
What is the brand of this product?
The brand of this product is RELIFE.
What is the model of this product?
The model of this product is RL-0001.
What is this product used for?
This product is used for cutting component leads, jumper wire, cables, insulation sleeves, and cable ties during mobile, tablet, and PC repair.
Which devices are compatible with this product?
This product is a universal hand tool and works on any phone, tablet, or PC board regardless of brand.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
Can the RELIFE RL-0001 cut hard steel pins or screws?
No. RELIFE designs the RL-0001 for wire, component leads, cables, insulation sleeves, nylon cable ties, and tape. Hard steel pins, screws, and thick shielding frames can damage the cutting edge.
What are the size and weight of the RELIFE RL-0001 diagonal cutter?
The RL-0001 is a 5-inch plier measuring 135 × 53 × 14 mm and weighing about 80 g gross (70 g net), with a 20° cutting-head design.