UFI eMMC Reader 3.0 + ISP Adapter 2-in-1 Universal

₨ 3,000

UFI eMMC Reader with ISP Adapter for Mobile Repair

A UFI eMMC reader with an ISP adapter gives your repair bench direct access to eMMC memory without booting the phone. You connect the adapter to the ISP points on the board, then use the UFI software to identify the chip, read user data, and run format, erase, resize, or firmware operations. The setup suits technicians handling dead phones, boot loop issues, and storage faults on Samsung and other Android handsets with SK Hynix, Toshiba, Kingston, or Micron memory. Diagnosis, read, and write stay on one platform.

In stock

18 People watching this product now!
Description

UFI eMMC Reader with ISP Adapter: Where It Fits on Your Repair Bench

The UFI eMMC reader with ISP adapter is a storage-level service tool. When a handset will not boot, the fault often sits in the eMMC chip rather than the software. Reading the chip directly lets you check the stored data, inspect the boot partitions, and write firmware without relying on the phone’s own boot process. It belongs at the programmer stage of the workflow: diagnose the symptom first, establish ISP access second, then read or write. Your results depend on a clean connection between the adapter and the board.

Connecting the ISP Adapter to the Board

Start by confirming the correct ISP pinout for the exact model and chip. Power the device off and use a multimeter to check continuity on each contact before you connect anything. Attach the adapter to the ISP points or test points, then connect the adapter to the UFI interface. A loose contact often causes a failed identify step, so check each point before you blame the software. Keep the board supported and the connections short to reduce noise during reads.

Reading and Identifying the eMMC Chip

Once the connection is stable, the software identifies the eMMC chip and reports its extended CSD data. From there, you read the boot1 and boot2 partitions and the user data area. Saving a full read before any write gives you a rollback point if the next operation fails. This step also confirms the memory vendor, which determines which operations the software will allow on that chip.

Write Operations: Repair, Resize, Format, and Firmware Update

The platform supports repair, resize, format, and full erase of the eMMC. It also writes full data images and updates firmware, including access through test points. Run a full erase or format only after you have a verified backup, because these operations remove the stored data. Use firmware writes on a known-good image for the exact chip. Check the result by reading the chip back and comparing the output with the source image.

Supported Memory Brands and Scope

The platform lists eMMC chips from Samsung, SK Hynix, Toshiba, Kingston, and Micron. This is a universal platform rather than a device-specific tool, so compatibility depends on the chip and the pinout you use. Confirm the chip marking and memory vendor before you start. A device that does not appear in the supported list still may work if the chip matches a supported family, but test with a read first before you attempt any write.

Additional information
Weight0.11 kg
Q & A
Please login to post questions

Key Features

  • Reads eMMC user data, boot1, boot2, and extended CSD information
  • Repairs, resizes, formats, and erases eMMC storage
  • Writes full data images and updates firmware
  • Accesses the chip through ISP and test points
  • Covers eMMC chips from Samsung, SK Hynix, Toshiba, Kingston, and Micron
  • Runs on the UFI platform software

Specifications

BrandUFI
CategoryISP and eMMC Tools
TechnologyeMMC read, write, and firmware operations through ISP access
CompatibilityUniversal, not device-specific
Supported DevicesSamsung and Android handsets with SK Hynix, Toshiba, Kingston, or Micron eMMC chips

Common Repair Uses

  • Reading eMMC user data from a dead phone
  • Reading boot1 and boot2 partitions for diagnosis
  • Formatting and fully erasing eMMC storage
  • Resizing eMMC partitions
  • Writing full firmware images to the chip
  • Updating firmware through test point access

Compatible Devices

  • Universal platform, scoped by eMMC memory family, not a specific phone model
  • Samsung handsets with eMMC storage
  • Android devices with SK Hynix eMMC chips
  • Android devices with Toshiba eMMC chips
  • Android devices with Kingston eMMC chips
  • Android devices with Micron eMMC chips
  • Universal scope; confirm the chip marking before work

FAQ

What is the product name?
The product name is UFI eMMC Reader 3.0 + ISP Adapter 2-in-1 Universal.
What is the brand of this product?
The brand of this product is UFI.
What is the model of this product?
The model is not verified for this bundle. Confirm with your supplier.
What is this product used for?
This product is used for reading, repairing, and writing eMMC memory through ISP access.
Which devices are compatible with this product?
This product is universal and covers eMMC chips from Samsung, SK Hynix, Toshiba, Kingston, and Micron.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
Which eMMC chip brands does the UFI platform support?
The platform lists Samsung, SK Hynix, Toshiba, Kingston, and Micron eMMC chips as supported.
Can this setup read a phone that will not boot?
It can read the eMMC through ISP access when the ISP points are reachable on the board, without booting the phone.