MiJing A22+ PCB Fixture for iPhone Logic Board Repair
₨ 2,000
MiJing A22+ PCB Fixture for iPhone Motherboard Rework
The MiJing A22+ PCB fixture for iPhone holds Apple logic boards steady during CPU and NAND rework. The 120 x 120 x 4 mm blue platform combines a fixed main board area with a rubber maintenance area and fixed alignment points in the repair zone. Seller listings cover iPhone 5s through iPhone 8 Plus boards with A7 to A10 chips in scope, and some also name the iPhone XR. Pair it with your hot air station, microscope, and reballing kit to lift chips, clean pads, and reball without shifting the board. You get a repeatable setup for every IC change on your bench.
In stock
MiJing A22+ PCB Fixture for iPhone: A Dedicated Logic Board Platform
The MiJing A22+ PCB fixture for iPhone gives your repair bench a flat, rigid platform for Apple logic boards from the A7 to A10 generation. You seat the board in a purpose-shaped holder and keep it still while you work around the CPU and NAND area. The fixture measures 120 x 120 x 4 mm and comes as a single blue unit. Seller listings pair it with iPhone 5s through iPhone 8 Plus boards, and some name the iPhone XR as well. If you strip iPhone motherboards every day, this holder replaces improvised tape and tweezers with a repeatable setup.
How the A22+ Holds the Logic Board
The A22+ combines a fixed main board maintenance area with a rubber maintenance area in one body. The board locates against fixed alignment points in the repair zone, so it returns to the same position each time you lift it and set it back. A fingerprint alignment repair area includes an open section for removing the cover, which gives you access without disturbing the rest of the layout. The 4 mm thickness keeps the platform stiff under hot air and tweezer pressure. As an iPhone logic board holder, it keeps both of your hands free for the hot air gun and tweezers, which matters when every pad on an A9 or A10 board counts.
iPhone Models and Chipsets for This Fixture
Listings tie the A22+ to iPhone 5s, 6, 6 Plus, 6s, 6s Plus, 7, 7 Plus, 8, and 8 Plus logic boards, with the iPhone XR appearing in several titles. The CPU references on those listings run from A7 to A10, which matches the chipset range the sellers name for NAND and CPU repair. Seller titles differ slightly on which models they include, so compare your exact board outline with the fixture before you apply any heat. The A22+ targets these generations and not the iPhone X series. For X, XS, and XS Max boards, MiJing sells the K21 fixture, which retailers list for exactly those models. If your bench also handles Samsung, Huawei, and Xiaomi boards, a universal MiJing holder such as the T22 Max or T23 Max adjusts across board shapes, so each fixture stays matched to the boards it suits.
Using the A22+ as an iPhone NAND CPU Repair Fixture
CPU and NAND jobs on iPhone boards demand a board that stays put while you heat, lift the chip, clean the pads, and reball. Seat the board in the A22+, lock your alignment, and bring in your hot air station and preheater for the lift. After the chip comes off, the same setup supports pad cleaning and glue removal under your microscope, so you never move the board between steps. When you do IC change karna on an iPhone board, hold the stencil over the pads with the board in the same position and place the chip back with the same alignment. For dead phone, boot loop issue, and hang on logo faults that trace back to NAND or CPU solder joints, a stable board setup cuts handling errors. Pair it with a reballing kit and a flux you trust, and you shorten the time between a dead phone and a working one.
| Weight | 0.35 kg |
|---|
Key Features
- ✓Fixed main board maintenance area built for iPhone logic boards
- ✓Integrated rubber maintenance area in the same body
- ✓Fixed alignment points in the repair zone for repeatable board placement
- ✓Fingerprint alignment repair area with an open section for cover removal
- ✓120 x 120 x 4 mm platform size
- ✓Firm, durable build
- ✓Scoped to A7 to A10 CPU and NAND repair work
- ✓Supplied as 1 x PCB holder fixture
Specifications
| Brand | MiJing |
|---|---|
| Model | A22+ |
| Category | PCB Holder / iPhone Logic Board Fixture |
| Compatibility | Apple iPhone logic boards (A7 to A10 CPU and NAND repair) |
| Supported Devices | iPhone 5s, 6, 6 Plus, 6s, 6s Plus, 7, 7 Plus, 8, 8 Plus (some sellers also list iPhone XR) |
| Dimensions | 120 x 120 x 4 mm |
| Weight | 0.3 kg (package weight) |
Common Repair Uses
- ✓Holding iPhone logic boards during CPU and NAND rework
- ✓CPU removal and reinstallation on supported iPhone boards
- ✓NAND removal and reinstallation on supported iPhone boards
- ✓CPU and NAND reballing with a stencil
- ✓Glue removal around chips and pads
- ✓Pad cleaning under a microscope
- ✓Holding the board steady under hot air and preheating
- ✓IC change karna on iPhone motherboards
- ✓Fingerprint alignment area repair work
Compatible Devices
- ✓Apple iPhone logic boards from the A7 to A10 generation, per seller listings (iPhone XR named by some sellers only)
- ✓iPhone 5s
- ✓iPhone 6 and iPhone 6 Plus
- ✓iPhone 6s and iPhone 6s Plus
- ✓iPhone 7
- ✓iPhone 7 Plus
- ✓iPhone 8
- ✓iPhone 8 Plus
- ✓iPhone XR (some sellers list it, so confirm board fit before use)
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
Does the MiJing A22+ fit iPhone X, XS, or XS Max boards?
Can I use the MiJing A22+ for CPU and NAND reballing on iPhone 7 boards?
Related products
QIANLI 008 Cutting Knife Blade for BGA Underfill Removal
Out of stock



