MAX77705C Power IC for Samsung S10 / S10+ / Note 10+

₨ 250

MAX77705C Power IC for Samsung Galaxy S10 Series Boards

The MAX77705C from Maxim Integrated combines battery charging, fuel gauging, haptic motor driving, LED control, and USB Type-C management inside one companion PMIC. Samsung fitted it on Galaxy S10e, S10, S10+, and Note 10+ mainboards, so a failed chip shows up as no charging, a frozen battery percentage, a dead vibration motor, or a phone that ignores the charger completely. Mechanicpk supplies this IC for board-level technicians who need the exact replacement part instead of a costly board swap. Pair it with a controlled hot air station and quality flux to restore the full charging path on your repair bench.

10 People watching this product now!
Description

MAX77705C Power IC: The Companion PMIC Behind Samsung Type-C Charging

The MAX77705C power IC sits between the USB Type-C port, the battery, and the main application PMIC on several Samsung Galaxy flagship boards. Maxim Integrated built the MAX77705 family as a companion power management and Type-C interface IC, and this single package runs five jobs at once: the battery charger, the fuel gauge, the haptic motor driver, the LED driver, and the Type-C port controller. Samsung has used this family across its S series since the Galaxy S9 generation, and the C-marked variant appears on Galaxy S10e, S10, S10+, and Note 10+ boards. When this chip fails, the symptoms rarely point to one function, so accurate diagnosis matters more than the soldering itself.

Five Functions in One Package: What the MAX77705 PMIC Controls

Knowing the internal blocks explains why one faulty IC creates several unrelated-looking complaints. The charger block takes VBUS from the Type-C connector and manages current flow into the battery. The fuel gauge block reports state of charge to the system, so a faulty gauge section gives you a stuck or jumping percentage even with a healthy battery. The Type-C management block handles attach detection and cable orientation, and a fault here means the phone simply ignores a known-good charger. The haptic block drives the vibration motor, and the LED block controls the LED output lines. A board that shows no charging together with dead vibration points straight at the MAX77705 PMIC, not at the charging flex. That cross-function pattern separates a genuine chip fault from a basic connector problem and saves you from replacing parts that never failed.

Samsung S10 Charging IC Diagnosis Before You Change the Chip

Run the basic checks before you commit to IC change karna. Connect a USB ammeter or DC power supply and watch the current draw with a known-good cable and charger. Zero draw on VBUS, or a draw that starts and then collapses, points toward the charging section. Inspect the Type-C connector and its flex first, because a dirty or corroded port mimics a chip failure perfectly. Next, take diode-mode readings around the Samsung S10 charging IC with your multimeter and compare them against a known-good board of the same model. If you find a short on VBUS or the battery line, use rosin smoke or a thermal camera to locate the heat point; a hot MAX77705C confirms the fault. Liquid damage and unstable fast chargers often sit behind these failures. Always read the marking on the original chip before ordering, because Samsung fitted different charging ICs across different variants and regions of the same model.

Replacement Workflow with the MAX77705C Power IC

A clean replacement depends on heat control and pad care. Mount the board in a PCB holder, remove the shield, and apply a quality no-clean flux around the chip. Preheat the board to reduce thermal stress on neighboring components, then lift the old IC with your hot air station at a moderate airflow so nearby capacitors stay in place. Clean the pads with solder wick and flux, and check every pad under a microscope for lifted copper before you continue. If the replacement chip needs fresh solder balls, use a matching stencil from your reballing kit. Align the new MAX77705C power IC against the board marking, reflow it evenly, and let the board cool naturally. Clean the flux residue, then test charging current, battery percentage behavior, Type-C detection, and the vibration motor before closing the phone. For shops that handle charging faults daily, a stereo microscope upgrade pays for itself through faster pad inspection and fewer comebacks.

Additional information
Weight0.1 kg
Q & A
Please login to post questions

Key Features

  • Genuine MAX77705C marking for direct replacement on supported Samsung boards
  • Integrated switching battery charger block
  • Built-in fuel gauge for battery state-of-charge reporting
  • USB Type-C attach and orientation management
  • Haptic motor driver for the vibration motor
  • LED driver block within the same package
  • Restores charging without a full mainboard replacement
  • Suits professional hot air and reballing workflows

Specifications

BrandMaxim Integrated
ModelMAX77705C
CategoryMobile Phone ICs > Power & Charging ICs
CompatibilitySamsung Galaxy S10e, S10, S10+, Note 10+
TechnologyCompanion PMIC with USB Type-C interface, battery charger, fuel gauge, haptic motor driver, and LED driver

Common Repair Uses

  • Board-level charging and power-path repair on Samsung flagship mainboards
  • No charging with a known-good charger and cable
  • Type-C charger not detected on connection
  • Battery percentage stuck or jumping irregularly
  • Vibration motor dead together with charging faults
  • Short on VBUS line traced to the charging IC
  • Dead phone after liquid damage near the charging section
  • Charging IC failure after use of unstable fast chargers
  • Persistent charging fault after charging flex replacement

Compatible Devices

  • Verified on Samsung boards that carry the original MAX77705C marking
  • Samsung Galaxy S10e
  • Samsung Galaxy S10
  • Samsung Galaxy S10+
  • Samsung Galaxy Note 10+
  • Other Samsung S-series boards from the MAX77705 family (S9 generation onward) — fit only where the board carries the C marking

FAQ

What is the product name?
The product name is MAX77705C Power IC.
What is the brand of this product?
The brand of this product is Maxim Integrated.
What is the model of this product?
The model of this product is MAX77705C.
What is this product used for?
This product is used for replacing a faulty charging and power management IC on Samsung Galaxy mainboards to fix charging, fuel gauge, Type-C detection, and vibration faults.
Which devices are compatible with this product?
This product is compatible with Samsung Galaxy S10e, S10, S10+, and Note 10+ boards that carry the original MAX77705C marking.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
Can a faulty MAX77705C stop vibration on a Samsung S10?
Yes. The MAX77705C contains the haptic motor driver, so a failed chip can kill vibration along with charging, which makes this combination a strong sign of an IC fault rather than a motor fault.
Can I use the S2MU106 charging IC instead of MAX77705C on Samsung S10?
No. The S2MU106 is a different charging IC from a different manufacturer and does not work as a drop-in substitute. Always fit the same part number the board originally carries.