MT6308HP IC – MediaTek Envelope Tracking Power IC

₨ 400

MT6308HP IC for Envelope Tracking Power Supply Repair

The MT6308HP is a MediaTek IC for envelope tracking, a supply method that drives the RF power amplifier with a voltage that follows the transmit signal. When a board shows weak signal, lost network, or faults on the PA supply path, this IC is a repair candidate to check. Its envelope tracking function is confirmed through MediaTek’s MT6308P teardown analysis. Verify the IC marking against your board schematic before replacement.

14 People watching this product now!
Description

MT6308HP IC: Envelope Tracking Power Supply for the RF Power Amplifier

The MT6308HP IC is a MediaTek part used in envelope tracking supply circuits. This technique feeds the RF power amplifier a supply that rises and falls with the transmit envelope, so the amplifier does not run at full voltage on every packet. Your repair bench sees this IC mainly when the PA supply path is suspected. Its function is confirmed through TechInsights’ architecture analysis of the closely related MT6308P, which was removed from a production OPPO 5G handset. Confirm the marking on your specific board before you order or replace it.

How Envelope Tracking Changes the Fault Picture

Envelope tracking shifts where faults appear. A failed supply in this path can starve the power amplifier of the voltage swing it needs. The result is often weak signal, dropped 5G, or no network, while basic boot behavior may stay normal. Charging circuits and battery gauge behavior are less likely to be the cause in these cases. Start with the PA supply rail before you change the RF front end.

Where This IC Fits in Your Diagnostic Workflow

Begin by checking the supply rail feeding the RF power amplifier with a multimeter or scope, if the board allows it. Compare the rail behavior against the schematic before you decide on replacement. A missing or unstable envelope output points toward the ET IC or the surrounding components. Confirm there is no short on the rail, because a shorted load can also trigger protection and make a good IC look dead. Replace the IC only after the surrounding path checks out.

Replacement and Reflow Considerations

Treat this as a fine-pitch BGA-style part. Use controlled hot air with a preheated board, and keep reflow temperature steady near the PA supply traces. Inspect ball alignment under magnification before final reflow. A misaligned output ball can recreate the same supply instability you were trying to fix. After replacement, test the power amplifier supply and signal behavior before you return the board.

Additional information
Weight0.1 kg
Q & A
Please login to post questions

Key Features

  • Envelope tracking supply for the RF power amplifier
  • Modulates supply voltage to follow the transmit signal envelope
  • Relevant to RF power path and PA supply faults
  • Part of the MediaTek power management family used in mobile repair

Specifications

BrandMediaTek
ModelMT6308HP
CategoryPower IC
TechnologyEnvelope Tracking (ET) Power Supply

Common Repair Uses

  • Repair workflows where the RF PA supply path is faulty.
  • Diagnosing weak signal, lost 5G, or no network with normal boot
  • Checking the RF power amplifier supply rail after a short or liquid damage
  • Replacing the IC when the envelope supply output is absent or unstable
  • Reballing the IC after reflow or board damage
  • Confirming supply behavior before replacing surrounding RF components

Compatible Devices

  • Universal, not device-specific. Verify IC marking against the board schematic before replacement.
  • Applies to boards using a MediaTek envelope tracking supply for the RF power amplifier
  • Device-specific fitment is not verified for this listing
  • Confirm marking and schematic before ordering or replacing

FAQ

What is the product name?
The product name is MT6308HP IC.
What is the brand of this product?
The brand of this product is MediaTek.
What is the model of this product?
The model of this product is MT6308HP.
What is this product used for?
This product is used as an envelope tracking supply for the RF power amplifier in mobile repair work.
Which devices are compatible with this product?
Device-specific compatibility is not verified. Confirm the IC marking against the board schematic before replacement.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
Is the MT6308HP a general battery charging IC?
No. Its verified role is envelope tracking for the RF power amplifier supply, not battery charging.
How should the MT6308HP be verified before replacement?
Check the IC marking against the board schematic, then confirm the supply behavior with a scope where the board allows it.