PMB6830 Baseband Power IC – BGA PMIC
₨ 450
PMB6830 Baseband Power IC for Board-Level Repair
The PMB6830 is a BGA baseband power IC for technicians who work on board-level power faults. You get a chip with the PMB6830 E102 A2 marking, which you should confirm against your target board before fitting. This part suits reballing and hot air rework benches where you test rails and current draw after replacement. Use it for dead phone and no-power diagnosis once you have ruled out simpler causes. Pair it with a controlled hot air station, a matched stencil, and flux for consistent results.
PMB6830 Baseband Power IC Replacement for Your Repair Bench
The PMB6830 baseband power IC is a BGA power management chip that you replace at the hot air station. Your workflow starts with reading the marking on the chip, which shows PMB6830 with E102 A2 on the top surface. Treat this part as a board-level replacement, not a quick swap. You test the power rails, rework the BGA footprint, and verify the result under load before the board goes back to the customer. Each stage below follows that order.
Identifying the Chip Before Fitting
Read the top marking first, and compare it with the reference you use for the target board. A matching marking alone does not prove the part belongs on that board, so confirm the fitment with your board records. Keep the removed chip for comparison when you have it, and set aside any unlabeled stock until you know its source. Record the marking, the board, and the fault you fixed in your repair log. This habit prevents a second visit when a similar chip looks identical under the microscope.
Reballing and Hot Air Reflow
Lift the old IC with hot air while you shield neighboring components from the heat. Clean the pads with flux and solder braid, then check for lifted or cracked pads under magnification. Apply fresh balls through a stencil that matches the ball pitch, because uneven balls cause open joints. Align the new chip with flux, then reflow at a steady temperature profile rather than pushing heat quickly. Let the board cool on its own before you handle it, since rushed cooling stresses the joints.
Testing the Repaired Board
Connect the board to a regulated DC supply and set a current limit before you power it. Watch the current draw during boot, because a high reading points to a short on a rail rather than a fault in the chip. Measure the outputs with a multimeter against your reference values for that board. Confirm the device reaches the boot logo and holds a steady state for several minutes. Return the board to the customer only after it passes these checks.
| Weight | 0.1 kg |
|---|
Key Features
- ✓BGA package suited for hot air rework
- ✓Top marking reads PMB6830 with E102 A2
- ✓Fits reballing and IC change workflows
- ✓Requires a stencil matched to its ball pitch
- ✓Needs ESD-safe handling on the repair bench
- ✓Board-level replacement part for power faults
Specifications
| Model | PMB6830 (E102 marking) |
|---|---|
| Category | Baseband Power IC |
| Technology | BGA package |
| Compatibility | Xiaomi Mi Pad 2 (seller listing only, confirm before fitting) |
Common Repair Uses
- ✓Baseband power rail troubleshooting
- ✓Dead phone and no-power diagnosis after rails are checked
- ✓IC change on BGA power IC boards
- ✓Reballing and hot air rework practice
- ✓Board-level power distribution repair
- ✓Board testing after reflow
Compatible Devices
- ✓Verified scope is limited. Device-specific compatibility is not confirmed by manufacturer data.
- ✓Xiaomi Mi Pad 2 (seller listing only, confirm the board before fitting)
- ✓Other boards: check the reference designator and board records before fitting
FAQ
What is the product name?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
Does the PMB6830 need reballing before fitting?
How do you verify the PMB6830 marking before fitting?
Related products
339S00108 WiFi IC For iPad Air iPad Pro 9.7 Replacement
In stock
343S0694 Touch IC U2402 iPhone 6 and 6 Plus Touch Black IC
In stock



