HI6526 V200 Power IC for Huawei Charging Repair
₨ 580
HI6526 V200 Power IC for Huawei Board-Level Charging Repair
The HI6526 V200 Power IC is a HiSilicon charging IC for Huawei-family mainboards. It manages how the phone accepts charger input and feeds the battery path. You use it when a board shows no charging response, a shorted charging line, or a burnt IC after liquid damage or a bad charger. The V200 suffix identifies a specific revision, so you match the marking on the original IC before you order. Mechanicpk supplies it for Pakistani repair shops that do hardware fault repair at component level. Pair it with a hot air station, a microscope, and a DC power supply for a clean IC change.
HI6526 V200 Power IC: A HiSilicon Charging IC for Huawei Boards
The HI6526 V200 Power IC is a charging IC from HiSilicon, the chip design company owned by Huawei. It sits on the mainboard and controls how charger power reaches the battery and the rest of the board. When a Huawei or Honor board stops charging after a short, a surge, or liquid damage, this IC is a common component-level suspect. Mechanicpk stocks the HI6526 V200 Power IC so your repair bench has the exact revision when the diagnosis points to the charging stage.
Why the V200 Revision Matters
Distributors list the HI6526 in more than one revision, including V100 and V200. Treat the suffix as part of the part number, not as decoration. Remove the old IC’s cover under the microscope, read the full marking, and compare it with the V200 before you order. Do not assume a V100 replaces a V200 on your board, because no verified cross-compatibility data supports that swap. This is a HiSilicon-platform part, not a universal charging IC, so it only fits boards that originally carry the HI6526 marking. A wrong revision costs you a lifted pad and a second hot air pass, and it costs your customer another day without a phone.
Confirming the Fault Before IC Change
A dead phone with no charging response does not always mean a bad IC. Start with the cheap checks. Inspect the charging port flex, clean the pins, and test with a known good cable and charger. Next, measure the charger line with your multimeter and watch the current draw on a DC power supply. A board that draws a high current with no output usually has a short on the charging path, and a board that draws nothing often has an open line or a missing input. Use rosin smoke or a thermal camera to find the component that heats up. If the HI6526 V200 Power IC heats first, you have a strong case for replacement. Skip this step and you risk changing a good IC and leaving the real fault on the board.
Replacement Workflow on Your Repair Bench
Once you confirm the fault, secure the board in a PCB holder and apply flux around the IC. Preheat the board so the heat spreads evenly, then lift the old IC with controlled hot air. Keep the airflow low so nearby capacitors and small parts stay in place. Clean the pads with solder wick, add fresh flux, and check the pads under the microscope for lifted tracks. If your IC needs reballing, use a reballing kit and a stencil that matches the footprint. Place the HI6526 V200 Power IC, align it by the pad marking, and reflow it evenly. Let the board cool, then power it through the DC supply before you assemble the phone. A hot air station with stable temperature control gives you the most consistent result on this job, and a better microscope is the upgrade that pays off fastest for pad inspection.
| Weight | 0.1 kg |
|---|
Key Features
- ✓HiSilicon charging IC for Huawei-family mainboards
- ✓V200 revision for exact marking match
- ✓Component-level replacement for charging faults
- ✓Suits repair shops that do board-level work
- ✓Works with hot air rework and standard flux
- ✓Pad inspection under a microscope before placement
- ✓Testable on a DC power supply before reassembly
- ✓Sold by Mechanicpk for Pakistani repair benches
Specifications
| Brand | HiSilicon (Huawei) |
|---|---|
| Model | HI6526 V200 |
| Category | Mobile Phone Charging / Power IC |
| Compatibility | HiSilicon-platform Huawei and Honor mainboards that carry the HI6526 marking |
| Technology | Charging and power management IC |
Common Repair Uses
- ✓Typical charging-path jobs for this IC:
- ✓Replacing a burnt charging IC after a charger surge
- ✓Fixing no-charging phones where the charger line shows a short
- ✓Solving charger-not-detected faults after the port and cable check out
- ✓Repairing liquid-damaged boards with a corroded charging stage
- ✓Fixing a heating charging stage that you traced with rosin or a thermal camera
- ✓Recovering a phone that draws no current from the DC power supply
- ✓Redoing an IC change after a failed first attempt that damaged pads
- ✓Final charging tests on the bench before you hand the phone back
Compatible Devices
- ✓Verified scope is HiSilicon-platform Huawei-family boards that use the HI6526 charging IC. Match the revision marking before ordering.
- ✓Huawei mainboards built on HiSilicon platforms
- ✓Honor-branded boards built on HiSilicon platforms
- ✓Boards whose original charging IC carries the HI6526 marking
- ✓Boards that carry the V200 revision marking
- ✓Boards sent in for charging-path hardware fault repair
- ✓Boards from liquid-damaged phones that need charging IC replacement
- ✓Not a universal part and not device-agnostic
- ✓Not an assumed replacement for the V100 revision
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
Is the HI6526 V200 the same as the HI6526 V100?
How do I confirm the charging IC is faulty before IC change?
Related products
358S IC T211 Samsung Tab Charging IC – Tab 3 USB Charger IC
In stock
PM8916 Power Control IC – Qualcomm PMIC for MSM8916 Boards
In stock



