MT6315 PMIC Power IC – MediaTek Buck Regulator

₨ 450

MediaTek MT6315 PMIC for Board-Level Power Repair

MT6315 is a MediaTek power management IC with four buck outputs, controlled over SPMI. Each output can be combined with the others through eFuse settings. It is a 45-ball WLCSP part, so it is a board-level component for technicians who work with micro-BGA rework. Use it when a power rail fault points to the PMIC itself. Confirm the exact variant against your board before ordering.

16 People watching this product now!
Description

MT6315 Power IC Overview

MT6315 is a configurable power management IC from MediaTek. It contains four buck converters, and the outputs can be combined using eFuse settings, which is why it appears on boards that need flexible rail allocation. Its SPMI interface connects it to the processor for control. For a technician, the part matters when a dead phone shows no rail output, or when a rail is present but voltage is out of range, and the fault traces back to the PMIC.

Electrical Limits and Package

The DigiKey listing for MT6315LP/B gives a maximum input of 6V and a maximum output of 1.19375V, with an operating range of -30°C to 85°C. The package is a 45-WLCSP measuring 2.35 x 3.44 mm. These limits help you set up a bench supply and measure rails safely before you condemn the IC.

Board-Level Diagnosis Workflow

Check the power-on sequence first. If the phone shows no output and the upstream rails are healthy, measure the buck outputs on the PMIC pads. A missing or low output points toward the IC or its surrounding components. Rule out shorts on downstream loads before you replace anything.

Rework Considerations

This is a fine-pitch WLCSP part. Use a hot air station with a controlled profile, flux, and a microscope for alignment. Remove the old IC with care to avoid lifting pads, then clean and inspect the pads before placing the new part.

Additional information
Weight0.1 kg
Q & A
Please login to post questions

Key Features

  • Four buck converters with eFuse-based output combining
  • SPMI-configurable interface
  • 6V maximum input voltage
  • 1.19375V maximum output voltage
  • Operating range -30°C to 85°C
  • 45-ball WLCSP package, 2.35 x 3.44 mm

Specifications

BrandMediaTek
CategoryPower Management IC (PMIC)
TechnologySPMI-configurable, four buck outputs, eFuse output combining
Input Voltage6V maximum
Output Voltage1.19375V maximum
Operating Temperature-30°C to 85°C
Package45-WLCSP, 2.35 x 3.44 mm

Common Repair Uses

  • Diagnosing a dead phone with no power output from the PMIC
  • Measuring buck rail voltages to isolate a power-rail fault
  • Replacing a failed PMIC after a short or an out-of-range rail
  • Reworking a board after a hot air removal and reinstallation
  • Checking SPMI-controlled power sequencing during boot faults
  • Verifying rail output after IC change

Compatible Devices

  • Verified scope: SPMI-interface PMIC. Device-specific pairing not verified.
  • Board-level MediaTek designs using the SPMI-controlled MT6315 power IC
  • Replacement for MT6315LP/B or MT6315GP/B packages, pending variant confirmation
  • Micro-BGA rework stations for 45-ball WLCSP packages
  • Repair benches working on PMIC rail diagnostics

FAQ

What is the product name?
The product name is MT6315 PMIC Power IC.
What is the brand of this product?
The brand of this product is MediaTek.
What is the model of this product?
The model of this product is MT6315, with the variant to be confirmed against the board marking.
What is this product used for?
This product is used as a power management IC that supplies regulated rails on board-level designs.
Which devices are compatible with this product?
This product is compatible with SPMI-interface MediaTek board designs. Device-specific compatibility is not verified.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
Is the MT6315 a 45-ball WLCSP package?
Yes. The verified package is 45-WLCSP measuring 2.35 x 3.44 mm.
What is the maximum input and output voltage of the MT6315?
The DigiKey listing gives a 6V maximum input and a 1.19375V maximum output.