MT6315 Power IC – 4-Phase Buck PMIC for Mobile Repair

₨ 400

MT6315 Power IC for Mobile Repair Boards

The MT6315 is a MediaTek power management IC with four buck regulator outputs. Its outputs can be combined through eFuse settings, and it is configured over SPMI. The IC is a step-down regulator with a 6V maximum input and a programmable output range from 0.4V to 1.19375V, rated for up to 5A. It comes in a compact 45-pin WLCSP package measuring 2.35 × 3.44 mm, and it operates between -30°C and 85°C. This listing covers the MT6315 family. The exact variant specifications for the SP suffix are not confirmed in this listing.

16 People watching this product now!
Description

MT6315 Power IC: Four-Phase Buck Regulator for Board-Level Repair

The MT6315 belongs to MediaTek’s power management IC family. It is a step-down DC/DC regulator that works with the SPMI bus. Four buck outputs sit inside one package, and eFuse settings can combine them. For a repair technician, that means the IC supplies several power rails from one chip, so a fault in its power section affects more than one rail. Before you remove a suspect IC, confirm the rail behavior on your board.

Electrical Characteristics

The datasheet data available for the MT6315GP/B variant lists a 6V maximum input and a maximum output of 1.19375V. The output starts at 0.4V. The current rating is 5A. The device is marked as a synchronous rectifier No, which means it is a non-synchronous step-down design. Check these values against your board schematic before replacement, because the SP suffix values have not been verified in this listing.

Package and Operating Range

The package is 45-pin WLCSP (UFBGA), measuring 2.35 × 3.44 mm, and it is surface mount. The operating temperature is -30°C to 85°C. Because the package is this small, reballing and replacement need a stable hot air setup and a microscope for alignment.

Where This IC Fits in Your Workflow

Use this IC when a board’s power rail check points to the MT6315 family. Measure the rails with a multimeter before you order a replacement. If the rail is shorted or missing, replace the IC after you confirm the fault is in the IC and not in a downstream component.

Additional information
Weight0.1 kg
Q & A
Please login to post questions

Key Features

  • Four buck outputs in one IC
  • Outputs can combine through eFuse settings
  • SPMI configurable
  • Step-down regulator with 6V input
  • 45-pin WLCSP package, 2.35 × 3.44 mm
  • Operating range -30°C to 85°C

Specifications

BrandMediaTek
ModelMT6315 (family; GP/B variant data)
CategoryPower ICs
Technology4-phase buck regulator, SPMI configurable
Package45-WLCSP (2.35 × 3.44 mm)
Input Voltage6V maximum
Output Voltage0.4V to 1.19375V
Power Rating5A
Operating Temperature-30°C to 85°C

Common Repair Uses

  • Replacing a faulty MT6315-family IC on a board
  • Testing the buck output rails on a power section
  • Reballing and reflowing the WLCSP package with hot air

Compatible Devices

  • MT6315 family PMIC, chipset-level scope. Not device-specific. Confirm the exact marking on the removed IC before replacement.
  • MT6315 family PMIC (chipset-level scope)
  • Not device-specific; verify against your board marking

FAQ

What is the product name?
The product name is MT6315 Power IC.
What is the brand of this product?
The brand of this product is MediaTek.
What is the model of this product?
This listing covers the MT6315 family. GP/B variant data is used as reference.
What is this product used for?
This product is a four-output step-down power IC used on boards that use the MT6315 family.
Which devices are compatible with this product?
This product is an MT6315 family PMIC, chipset-level scope, not device-specific.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
What is the input voltage limit of the MT6315?
The DigiKey listing for the MT6315GP/B shows a 6V maximum input.
What is the package size of the MT6315?
The package is 45-pin WLCSP measuring 2.35 × 3.44 mm.