SM8150 503-AC CPU IC – Snapdragon 855 Processor

₨ 5,200

SM8150 Snapdragon 855 CPU IC for Board-Level Mobile Repair

The SM8150 is Qualcomm’s Snapdragon 855 application processor, built on a 7 nm process with an octa-core Kryo 485 CPU and Adreno 640 graphics. This CPU IC gives repair technicians the main processor used on Snapdragon 855 boards. Use it on your repair bench when a processor-level fault is confirmed and the board needs a controlled rework cycle. Verified specifications, device scope, and repair workflow details appear below.

12 People watching this product now!
Description

SM8150 Snapdragon 855 CPU IC: Specifications and Repair Workflow

The SM8150 Snapdragon 855 CPU IC is the central processor behind a large group of 2019 Android flagships. Qualcomm built it on a 7 nm process and paired it with an octa-core Kryo 485 CPU and Adreno 640 graphics. For a repair technician, a fault in this chip often shows up as a dead phone or a boot loop issue. Your workflow starts by confirming the processor is the real fault source before any rework begins. This page covers core architecture, memory support, the bench steps where the chip fits, and the device families that use it.

Core Layout and Memory Support

The SM8150 uses an eight-core Kryo 485 arrangement with one Prime core at 2.84 GHz, three Gold cores at 2.42 GHz, and four Silver cores at 1.8 GHz. The Prime and Gold clusters follow the Cortex-A76 design, while the Silver cluster follows Cortex-A55. This three-tier layout lets the handset run light tasks on efficient cores and shift heavier apps and games to the larger cores. The 64-bit ARMv8 architecture supports both 64-bit and 32-bit application code. Memory support centers on LPDDR4X, and the Adreno 640 graphics unit runs at 585 MHz in the reference configuration. Compare these clock and memory figures when you check a donor board against a faulty one, because both boards should match the same platform revision.

Where This Chip Fits in the Repair Workflow

Start with diagnostics on the board, not the chip. Check the main power rails with a DC power supply set to a current limit, and watch for a rail that pulls heavy current or stays flat. Confirm the signs of a processor-level fault, such as no display and no boot, before you commit to removal. Once the diagnosis is clear, remove the chip with a hot air station and a stable rework profile, then clean the pads and apply flux. If you reball the package, use a stencil that matches the pitch and ball size, and place the chip carefully to avoid misalignment. After reinstallation, test charging, display, and network functions in sequence so you catch any lingering fault before the handset leaves your bench.

Device Scope and Verification Before Replacement

The SM8150 appears in flagship phones released around 2019, including Samsung Galaxy S10 models, the OnePlus 7 Pro, the Xiaomi Mi 9, the Sony Xperia 1, and the LG G8 ThinQ. Verify the exact board revision and chip marking on both the donor and faulty boards before you start any IC change karna job. Match the part suffix and package layout, because a mismatch can produce a board that powers on but fails at the network or display stage. Treat the processor as one link in the chain. If the board still fails after replacement, check the memory and power sections next. Keep a service record for each board, so future faults on the same model take less time to diagnose.

Additional information
Weight0.1 kg
Q & A
Please login to post questions

Key Features

  • 7 nm process node for the SM8150 platform
  • Octa-core Kryo 485 CPU with three performance tiers
  • Adreno 640 GPU clocked at 585 MHz
  • LPDDR4X memory support
  • 64-bit ARMv8 architecture
  • Hexagon 690 DSP for on-chip processing tasks
  • Designed for Snapdragon 855 flagship smartphones
  • BGA package suited to hot air rework and reballing

Specifications

BrandQualcomm
ModelSM8150 (Snapdragon 855)
CategoryMobile Phone CPU IC
CompatibilitySnapdragon 855 (SM8150) platform devices
Supported DevicesFlagship Android smartphones built on the Snapdragon 855 platform
Technology7 nm process, octa-core Kryo 485 CPU, Adreno 640 GPU, Hexagon 690 DSP, LPDDR4X memory support

Common Repair Uses

  • Processor-level workflows on Snapdragon 855 boards
  • CPU IC replacement on boards with a confirmed processor-level fault
  • Dead phone boards that fail after a flash attempt, once the power rails check out
  • Boot loop issue diagnosis after the memory and power sections pass testing
  • Reballing a removed chip before reinstalling it on the same board
  • Hot air rework practice on a high-pin-count BGA package
  • Bench training for technicians learning flagship processor identification
  • Board-level diagnostics with a DC power supply and current limit
  • Post-replacement testing of charging, display, and network functions

Compatible Devices

  • Snapdragon 855 (SM8150) platform phones, verified by model
  • Samsung Galaxy S10 series (SM-G973 models)
  • OnePlus 7 Pro
  • Xiaomi Mi 9
  • Xiaomi Redmi K20 Pro
  • Sony Xperia 1
  • LG G8 ThinQ
  • Oppo Reno 10x Zoom
  • ASUS ZenFone 6

FAQ

What is the product name?
The product name is SM8150 503-AC CPU IC, the Qualcomm Snapdragon 855 processor.
What is the brand of this product?
The brand of this product is Qualcomm.
What is the model of this product?
The model of this product is SM8150, marketed as the Snapdragon 855.
What is this product used for?
This product is used as the main processor on Snapdragon 855 boards during board-level mobile repair.
Which devices are compatible with this product?
This product is compatible with Snapdragon 855 (SM8150) platform phones, including Samsung Galaxy S10, OnePlus 7 Pro, Xiaomi Mi 9, Sony Xperia 1, and LG G8 ThinQ.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
Does the SM8150 support LPDDR4X memory?
Yes, the SM8150 platform supports LPDDR4X memory.
Which GPU does the SM8150 use?
The SM8150 uses the Qualcomm Adreno 640 GPU, clocked at 585 MHz in the reference configuration.