1616A0 U2 USB Charging IC for iPhone 13 Series

₨ 300

1616A0 U2 IC for iPhone 13 Charging Repair

The 1616A0 is a Tristar U2 USB charging IC used on the iPhone 13 series, including the iPhone 13 mini, iPhone 13, iPhone 13 Pro, and iPhone 13 Pro Max. When a phone refuses to charge even with a new cable, a working adapter, and a healthy battery, this component becomes a primary suspect. Check the marking on the board before you order, because the correct part number is what gets the phone charging again on the first attempt.

10 People watching this product now!
Description

1616A0 U2 IC for iPhone 13 Overview

The 1616A0 U2 IC for iPhone 13 is a Tristar U2 USB charging IC that handles power input from the Lightning port. When a phone will not charge after you have ruled out the cable, the adapter, and the battery, this part moves to the top of your suspect list. It applies to the iPhone 13, 13 mini, 13 Pro, and 13 Pro Max series. Understanding where it sits in the charging path saves you from unnecessary part swaps and keeps your bench moving.

Where This IC Fits in the Charging Workflow

Start every charging complaint with the simple checks. Test a known-good cable and adapter, inspect the Lightning port for debris or bent pins, and observe how the battery behaves under load. Only after those checks pass should you move to the board. Listings place the 1616A0 at reference U9300 on iPhone 13 boards, so use that reference to locate it quickly. Inspect the surrounding pads and nearby components under a microscope before applying heat, because a short on the charging path can make a healthy U2 appear dead. Record each result, so you can explain the replacement clearly if the customer asks why the part changed.

Verifying the Part Marking Before Replacement

Read the marking on the existing chip before you order a replacement. The 1616A0 marking should match the iPhone 13 series, and a mismatched part can leave the phone unable to charge even after a clean rework. Compare the marking under magnification and photograph it for your records. If the marking differs from your reference, stop and confirm the correct part for that board revision instead of forcing a fit. Ask your supplier to confirm the part number against the device model in writing, and keep the packaging label with the order so you can trace the part later.

Replacement Workflow and Bench Practice

Once you confirm the part, plan the rework carefully. Preheat the board to reduce thermal stress, apply flux, and use a hot air station at a controlled temperature to lift the old chip. Clean the pads with flux and braid, then inspect for lifted or cracked pads before you place the new part. Align the IC using the board markings, reflow it, and check the power rail with a multimeter for shorts before you power the board on. Test charging with a known-good cable, then observe battery behavior over several minutes. This sequence protects nearby components and gives you a clear pass or fail result.

Additional information
Weight0.1 kg
Q & A
Please login to post questions

Key Features

  • Tristar U2 USB charging IC for the iPhone 13 series
  • Part marking 1616A0 for direct verification before ordering
  • Board reference U9300 on common iPhone 13 layouts
  • Suited for hot air rework on a board-level repair bench
  • Fits a standard charging diagnostic sequence
  • Clear pass or fail result after replacement and charging test

Specifications

Model1616A0
CategoryiPhone USB Charging IC (U2 Tristar)
CompatibilityiPhone 13, iPhone 13 mini, iPhone 13 Pro, iPhone 13 Pro Max
Supported DevicesiPhone 13 series
TechnologyTristar U2 USB charging IC

Common Repair Uses

  • Charging failure with a healthy battery, after cable and port checks pass
  • Dead phone response on the charging path after a verified short is cleared
  • Intermittent charging where the U2 pads show lifting or cracks
  • Charging IC change on iPhone 13 boards during board-level diagnostics
  • Charging recovery on a board where U9300 has been damaged during earlier rework

Compatible Devices

  • iPhone 13
  • iPhone 13 mini
  • iPhone 13 Pro
  • iPhone 13 Pro Max
  • Scope: device-specific, iPhone 13 series only

FAQ

What is the product name?
The product name is 1616A0 U2 USB Charging IC.
What is the brand of this product?
This is an iPhone charging IC, used across the iPhone 13 series.
What is the model of this product?
The model of this product is 1616A0.
What is this product used for?
This product is used to repair charging faults on iPhone 13 series boards.
Which devices are compatible with this product?
This product is compatible with iPhone 13, iPhone 13 mini, iPhone 13 Pro, and iPhone 13 Pro Max.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
Does the 1616A0 U2 IC fit the iPhone 13 mini and 13 Pro Max?
Listings state that the 1616A0 covers the iPhone 13, 13 mini, 13 Pro, and 13 Pro Max. Confirm the marking on your board before ordering.
Where is the 1616A0 U2 IC located on iPhone 13?
Common listings place the 1616A0 at board reference U9300. Verify the reference on your own logic board before removal.