AMT Dongle (Lifetime) – MTK Preloader, BROM & EDL Tool
₨ 1
MTK Preloader and BROM Access
The AMT Dongle (Lifetime) gives MediaTek repair benches direct access to Preloader and BROM mode, the low-level entry points that stay open when a board will not boot normally. Its feature set covers eMMC dump read and write, single-partition flashing, FRP and pattern handling, and IMEI repair from one interface. Lifetime activation removes the annual renewal cost. Huawei and Honor boards that need EDL mode recovery also fall within its scope. It suits repair shops that run MTK jobs daily and want one dongle for both software fixes and dead board recovery.
Out of stock
AMT Dongle (Lifetime) for MTK Flashing and Board-Level Recovery
The AMT dongle lifetime MTK flashing tool is built for workshops that handle dead phones, FRP locks and firmware faults every week. Its main strength is low-level access. Preloader mode reaches a device that still responds in part, while BROM mode communicates with the chipset before Android loads. On a phone that will not enumerate in normal mode, that difference decides whether the board can be recovered at all. Because the license is lifetime, the tool carries no annual renewal cost on your bench.
Preloader and BROM Mode for Dead Boards
A dead phone usually fails in one of two places. Either the board still answers at a basic level, or it goes silent in normal mode and never reaches the operating system. Preloader mode covers the first case. It gives you the entry point for standard read and write operations once the chipset is partly communicating. BROM mode covers the second. It reaches the MediaTek boot ROM directly, so the tool can work before Android loads at all. Reach for BROM on boards that are stuck, unresponsive or damaged after a failed flash, and use Preloader when the device still accepts commands.
eMMC Read, Write and Single-Partition Flashing
Full eMMC dumps in .bin format can be read from a working board and written back when a repair calls for it. That gives you a backup before any risky operation, which matters on boards you cannot afford to lose. The single-partition option is often the more practical feature on a busy day. When a fault is confined to one partition, such as a corrupted boot partition, you can restore only that section instead of reflashing the whole firmware. That saves time on isolated faults and keeps the job focused on the part that failed.
FRP, Pattern and IMEI Jobs from One Menu
FRP lock and pattern unlock are routine items in most repair queues. The tool groups its operations into a menu, so you select the job and let it run instead of building the sequence step by step. That matters when several phones are waiting and only one needs board-level work. IMEI repair sits in the same interface, which helps after a bad flash or a baseband-related fault. Keeping these jobs in one dongle means fewer tools open at the bench and fewer switches between sessions mid-job.
Huawei and Honor EDL Recovery
Huawei and Honor boards that will not respond to anything else are the reason EDL support earns its place on this dongle. EDL mode provides a recovery path for hard-bricked units through two routes: an XML backup restore and a full update.app write. Choose the route that matches the backup you hold. Before you start, confirm the exact model and firmware on the device, because EDL recovery depends on matching files.
| Weight | 0.1 kg |
|---|
Key Features
- ✓Preloader and BROM mode access for MTK chipsets
- ✓FRP lock and pattern unlock handling
- ✓eMMC dump read and flash in .bin format
- ✓Single-partition eMMC flashing without a full reflash
- ✓IMEI repair function
- ✓EDL mode support for Huawei and Honor units
- ✓XML backup restore and full update.app write for Huawei and Honor
- ✓Lifetime activation with no yearly renewal
Specifications
| Brand | AMT |
|---|---|
| Category | Mobile Phone Flash Tools |
| Compatibility | MediaTek (MTK) chipset Android phones |
| Supported Devices | Vivo, Xiaomi, Oppo, Huawei, Honor |
| Technology | MediaTek Preloader and BROM mode, eMMC read/write, EDL mode |
Common Repair Uses
- ✓Phone flashing, FRP and pattern jobs, and board-level recovery on MediaTek devices
- ✓FRP lock removal
- ✓Pattern unlock
- ✓Bootloader unlock
- ✓Firmware flashing through Preloader mode
- ✓eMMC dump read and write
- ✓Single-partition eMMC flashing
- ✓IMEI repair
- ✓Huawei and Honor hard-brick recovery via EDL mode
Compatible Devices
- ✓MediaTek (MTK) chipset Android phones, scoped to the brands listed on the product page
- ✓MediaTek (MTK) chipset Android phones
- ✓Vivo
- ✓Xiaomi
- ✓Oppo
- ✓Huawei
- ✓Honor
FAQ
What is the product name?
What is the brand of this product?
What is the activation type of this dongle?
What is this product used for?
Which devices are compatible with this product?
Does this dongle support BROM mode for dead MTK phones?
Can this dongle recover Huawei or Honor phones in EDL mode?
Related products
Flash 64 Ultra Tool Box full set – UFS eMMC ISP Programmer
In stock
Smart-Clip2 Basic Set with Packs 2, 3, 4, 5, 6, 7 Activated
Out of stock



