Aixun 2D Screwdriver Set for Mobile Repair
₨ 1
Aixun 2D Screwdriver Set for Quick Phone Disassembly
The Aixun 2D screwdriver set gives your bench five bit types in one color-coded driver: Philips, tri-point, pentalobe, pinhead Philips, and Torx T2. Each head uses alloy steel with a magnetic tip, so loosened screws stay put during back cover and frame removal. The anti-slip handle and internal bearing support steady turning across repeated disassembly. At 131mm long with a 20mm body, it fits a standard tool roll. The bit selection covers the screw types you encounter most often, which makes it practical for mixed-brand workloads on phones, tablets, and small electronics.
Out of stock
2D Screwdriver Set for Mobile Repair: Bit Types and Workflow
A 2D screwdriver set for mobile repair earns its place before any diagnostic work begins, because every phone, tablet, and small electronic device starts with its case. A mismatched or worn tip can strip a screw head long before you reach the board, and a stripped head turns a five-minute disassembly into a slow extraction. The Aixun 2D screwdriver set places five common bit types into one color-coded driver, so you move from back cover removal to display access without switching tools. It suits a repair bench that handles mixed brands and sees the same small set of screw heads across every shift.
Five Bit Types in One Color-Coded Driver
The set gives you Philips, tri-point, pentalobe, pinhead Philips, and Torx T2 bits in a single handle, so one driver covers the screw types you meet most often on a phone or tablet. Each bit type carries its own color, which lets you pick the correct head by sight instead of reading a label in the middle of a job. The pentalobe bit suits the five-point back-panel screws found on many Apple phones, and a correctly sized tip protects those heads from rounding over time. The tri-point screwdriver bit handles the triangular fasteners that often secure battery and connector areas, where a generic cross bit would slip. Pinhead Philips, also called internal cross, sits in recessed positions that a standard cross bit cannot seat into properly, so this dedicated tip matters on tight boards. Torx T2 covers small star-shaped fasteners found on some tablets and compact electronics, rounding out the set for daily mixed-brand work.
Magnetic Tip, Alloy Steel Head, and Anti-Slip Grip
The alloy steel head grips the screw slot firmly, which reduces the chance of slipping during each turn. A magnetic tip holds a loosened screw in place, a practical advantage when you work with small pentalobe or tri-point fasteners that are easy to lose on a cluttered bench. The anti-slip handle keeps your hand stable through repeated turns, so you retain control when you remove dozens of screws in one session. The internal bearing supports smooth rotation, which lowers the strain on your wrist across a long shift of disassembly work. At 131mm long with a 20mm body diameter, the driver fits a standard tool roll and sits comfortably in hand during extended use.
Where This Set Fits in Your Repair Workflow
Disassembly comes first in most screen replacement, battery swap, and charging port jobs, so this set usually gets used before any other tool at the bench. Remove back cover and frame screws before you test power rails, swap a display, or open the board for IC change or jumper work. A clean first step protects the device from damage during opening and keeps the customer’s phone in better condition for the rest of the repair. This 2D screwdriver set stays at the front of your bench, so you reach for the correct bit immediately and shorten turnaround time at the counter. Stripped screws add minutes to every job and can turn a simple battery swap into a difficult extraction that risks the frame.
| Weight | 0.29 kg |
|---|
Key Features
- ✓Five bit types in one color-coded set
- ✓Alloy steel head for a firm slot grip
- ✓Magnetic tip holds loosened screws
- ✓Anti-slip handle for controlled turning
- ✓Internal bearing for smooth rotation
- ✓Compact 131mm body for tool rolls
Specifications
| Brand | AiXun |
|---|---|
| Category | Mobile Repair Tools |
| Compatibility | Universal, not device-specific |
| Supported Devices | Phones, tablets, and small electronics with Philips, tri-point, pentalobe, pinhead Philips, and Torx T2 screws |
| Technology | Five-bit color-coded set with magnetic tip |
| Material | Alloy steel |
| Dimensions | 131mm length, 20mm body diameter |
Common Repair Uses
- ✓Back cover removal
- ✓Frame and chassis disassembly
- ✓Display and screen removal
- ✓Battery access
- ✓Charging port repair preparation
- ✓Board opening for diagnostics
Compatible Devices
- ✓Universal, not device-specific. Scope covers the screw head types below.
- ✓Phones and tablets with Philips (cross) screws
- ✓Tri-point screws
- ✓Pentalobe screws
- ✓Pinhead Philips (internal cross) screws
- ✓Torx T2 screws
- ✓Small electronics using the same five head types
FAQ
What is the product name?
What is the brand of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
Does this set include a pentalobe bit for back-panel screws?
Is the driver tip magnetic?
Related products
QIANLI 008 Cutting Knife Blade for BGA Underfill Removal
Out of stock
UFI eMMC BGA Soldering Adapter (8 Footprints) for UFI-Box
In stock



