Z3X Easy-JTAG Plus UFS BGA153 Socket Adapter
₨ 36,000
UFS BGA153 Socket Adapter for Z3X Easy-JTAG Plus Box
The Z3X UFS BGA153 socket adapter seats 153-ball UFS packages in the Easy-JTAG Plus box for direct reading and writing on your repair bench. It supports Direct Mode and exposes an ISP output signal on the adapter, so one socket covers more than one connection path. Each unit carries an ECDSA-protected serial number and is rated for at least 30,000 uses. Z3X offers the adapter standalone and inside UFS multi-socket sets that add BGA254 and BGA95 sockets. Choose it when your jobs involve BGA153 UFS storage removed from a board.
Out of stock
UFS BGA153 Socket Adapter for Z3X Easy-JTAG Plus
The UFS BGA153 socket adapter is the link that turns the Easy-JTAG Plus box into a working UFS programmer for 153-ball packages. You remove the chip, seat it in the socket, and let the box handle reads and writes through its control software. The adapter does the signal routing between the chip and the box, so your bench work centers on a clean seat and a stable connection. That makes it a practical choice for technicians who see UFS storage on a regular basis, especially on boards where the chip cannot be accessed while it remains soldered.
Where the Adapter Fits in Your Repair Workflow
Most UFS jobs start with diagnosis. When a phone shows a dead boot or a hang on logo, you need to know whether the storage holds readable data before you commit to a board-level repair. The adapter lets you pull the chip, check its contents in Direct Mode, and decide whether the fault sits in the storage or somewhere else on the board. If the storage checks out, the same socket carries the write path, so you keep one setup for both steps. Plan the removal with a hot air station and a controlled preheat, then inspect the pads under a microscope before the chip goes into the socket. Clean pads and correct alignment prevent most seating faults. Treat the socket as a precision fixture rather than a general tray, and your read errors drop across repeated jobs. Keep a log of each chip’s ball count and firmware state, because that record speeds up the next job on the same board family.
Build Quality and Connection Details
The socket uses high positioning accuracy, which keeps the 153 contacts aligned with the chip pads on every insertion. Each unit carries an ECDSA-protected serial number, so the box can verify the adapter before it runs a job. Manufacturers rate the socket for at least 30,000 uses, which gives a busy shop a long service life when you handle it with care. Connect the adapter to the Easy-JTAG Plus box, open the control software, and confirm the chip type before you start a read or write. Keep the socket clean and store it in its case between jobs. Avoid forcing the lid closed, because misalignment damages the contacts faster than normal use does. A quick visual check of the contacts before each job catches debris early and protects both the adapter and the chip.
Chip Scope and Set Options
This adapter targets UFS packages with a 153-ball layout. Z3X also includes it in sets that add the BGA254 and BGA95 UFS sockets, so you can cover several package sizes from one box. If your bench mainly handles eMMC, the Z3X 6-in-1 eMMC set covers BGA153, BGA159, BGA162, BGA186, BGA221, and BGA529 footprints, and you can add it alongside the UFS adapter. Check your chip’s ball count before you order, because a 153-ball socket will not accept a 254-ball package. Pair the adapter with a hot air station for removal and a microscope for pad inspection. Those tools complete the same workflow the box starts, and together they give you a repeatable process for every UFS job.
| Weight | 0.11 kg |
|---|
Key Features
- ✓High positioning accuracy for consistent contact alignment
- ✓ECDSA-protected serial number against illegal copying
- ✓Rated for at least 30,000 uses
- ✓Direct Mode read and write support
- ✓ISP output signal on the adapter
- ✓Works with the Z3X Easy-JTAG Plus box
- ✓Offered standalone or within UFS multi-socket sets
Specifications
| Brand | Z3X |
|---|---|
| Category | UFS BGA153 Socket Adapter |
| Compatibility | Z3X Easy-JTAG Plus box |
| Supported Devices | UFS BGA153 (153-ball) packages, chip-level scope |
| Technology | ECDSA-protected serial number, Direct Mode and ISP output signal |
Common Repair Uses
- ✓Off-board reading of UFS BGA153 storage after chip removal
- ✓Writing repaired data back to a removed UFS BGA153 chip
- ✓Diagnosing dead boot faults by checking storage contents first
- ✓Reading chip contents in Direct Mode during board-level diagnosis
- ✓Connecting through the ISP output signal on the adapter
- ✓Testing UFS BGA153 chips after reballing and cleaning
Compatible Devices
- ✓Z3X Easy-JTAG Plus box (host programmer)
- ✓UFS BGA153 (153-ball) package chips
- ✓Chip-level scope; device-specific compatibility not verified
- ✓Available within Z3X UFS multi-socket sets (BGA254, BGA95)
FAQ
What is the product name?
What is the brand of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
Which UFS package sizes does the Z3X set cover?
Can this socket handle a 254-ball UFS chip?
Related products
QIANLI 008 Cutting Knife Blade for BGA Underfill Removal
Out of stock
Qianli 011 16-in-1 Glue Removal Knife for Mobile Repair
Out of stock
RELIFE RL-004SA silicone pad – Anti-slip
In stock



