Relife RL-008A LCD Screen Fixing Clamp Set (4 Pcs)

₨ 1,500

Relife RL-008A LCD Screen Fixing Clamp Set, 4 Pieces

The Relife RL-008A LCD screen fixing clamp set gives you four adjustable clamps for holding screens, frames, and glass back covers under steady pressure while adhesive cures. An aluminum alloy body, a threaded adjustment knob, and double-layer silicone pads keep contact even across a 5–15 mm thickness range. Use it for light leak degumming, OCA lamination hold, frame fixing, and screen replacement on phones, tablets, and curved-screen devices. Order the Relife RL-008A at Mechanicpk and keep your repair bench ready for bonding work.

In stock

12 People watching this product now!
Description

Relife RL-008A LCD Screen Fixing Clamp for Stable Bonding Pressure

The Relife RL-008A is an LCD screen fixing clamp set that gives you controlled, repeatable pressure while adhesive sets on a display, frame, or back glass. Each set contains four clamps, so you spread pressure along several edges of a phone or tablet instead of relying on a single point. An aluminum alloy body, a threaded adjustment knob, and double-layer silicone pads define the build. The clamping range runs from 5 mm to 15 mm, which covers most smartphone stacks, tablets, curved-screen devices, and glass back covers that pass through your repair bench.

Why an LCD Screen Fixing Clamp Matters After Lamination

When you bond a touch panel or LCD assembly to a frame, the OCA and adhesive need steady contact to cure without lifting at the corners. Hand pressure fades within seconds, and stacked weights shift the moment you bump the bench. The RL-008A solves this with a threaded knob that lets you set clamping force by turns instead of by feel. You press the gap between the screen and the body, tighten the knob, and move on to the next clamp. This suits light leak and degumming jobs, where uneven pressure leaves bright edges along the display. It also suits frame fixing, where the bracket, backlight, or polarizer must stay seated until the glue holds. With four clamps, you cover both long sides and the top and bottom of a panel at the same time.

Aluminum Alloy Body and Silicone Pad Protection

The aluminum alloy body keeps each clamp light enough to sit on a phone edge without tipping the device. Double-layer silicone pads touch the screen and housing, so you clamp glass back covers and curved panels without marking the surface. Silicone also wipes clean of dust and adhesive residue, which keeps the pad faces ready between jobs. The threaded knob moves in fine steps, so you tighten gradually and stop as soon as the panel sits flush. Thin OLED and curved panels do not need maximum force. Aim for even contact along the edge, and check the panel under your microscope before you leave it to cure.

Where It Fits in Your Repair Workflow

In a typical screen replacement, you separate the old panel with a hot air station or heating pad, clean the frame, apply fresh adhesive, seat the new assembly, and hold it while the glue sets. The RL-008A takes over at the holding stage, so your hands stay free for the next phone. It pairs with a hot air station for separation, a microscope for inspecting edge gaps, and a PCB holder for work on the board side. If you need rotation and multi-angle fixing, Relife’s RL-601 series rotating fixtures sit one step above this clamp, while the RL-008A stays beside them as the quick pressure tool. The same set serves iPhone, iPad, Samsung, and general Android tablet jobs, so you handle display problem complaints, light leak after replacement, and loose frame repairs with one consistent clamping step.

Additional information
Weight0.19 kg
Q & A
Please login to post questions

Key Features

  • Set of four clamps for multi-edge pressure
  • Aluminum alloy body
  • Threaded knob for fine pressure control
  • 5–15 mm adjustable clamping range
  • Double-layer silicone pads for screen and housing protection
  • Fits phones, tablets, curved screens, and back cover glass
  • Suits OCA, mold, cover, bracket, backlight, and polarizer fixing
  • Compact and lightweight for bench use

Specifications

BrandRelife
ModelRL-008A
CategoryLCD Screen Fixing Clamp / Phone Repair Clamp
CompatibilityPhones, tablets, curved screens, and back cover glass within 5–15 mm thickness
Supported DevicesUniversal, not device-specific
TechnologyThreaded knob height adjustment with double-layer silicone pads
MaterialAluminum alloy body with silicone pads
Package Quantity4 pieces

Common Repair Uses

  • Pressure holding and fixing during bonding and screen assembly work.
  • Light leak degumming on bonded displays
  • Holding OCA-laminated touch and LCD assemblies
  • Frame fixing during adhesive curing
  • Seating bracket, backlight, and polarizer layers
  • Pressing glass back covers after replacement
  • Holding the screen gap during screen replacement
  • Pressing curved-screen frames
  • Setting adhesive on tablet display repairs

Compatible Devices

  • Universal, not device-specific. It fits any device whose clamped stack measures 5–15 mm.
  • iPhone models with glass back covers
  • iPad screens within the 5–15 mm clamping range
  • Android tablets within the 5–15 mm clamping range
  • Most Android smartphones with flat displays
  • Curved-screen smartphones
  • Samsung frame-based screen assemblies
  • Glass back cover panels
  • Touch and LCD assemblies bonded with OCA

FAQ

What is the product name?
The product name is Relife RL-008A LCD Screen Fixing Clamp Set.
What is the brand of this product?
The brand of this product is Relife.
What is the model of this product?
The model of this product is RL-008A.
What is this product used for?
This product holds screens, frames, and glass back covers under steady pressure during bonding, light leak degumming, and screen replacement.
Which devices are compatible with this product?
This product is universal and not device-specific. It works with phones, tablets, curved screens, and back cover glass within a 5–15 mm thickness range.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
What is the clamping range of the Relife RL-008A?
The Relife RL-008A clamps devices with a thickness of 5 mm to 15 mm, and a threaded knob sets the pressure.
Will the RL-008A scratch curved screens or glass back covers?
The clamp uses double-layer silicone pads on the contact surfaces to protect the screen and housing. Tighten the knob until the panel sits flush and avoid excess force on thin panels.