RF4 RF-DA8 Disassemble Tool Kit 3-in-1 Blade Set
₨ 1,200
RF4 RF-DA8 3-in-1 Blade Set
The RF4 RF-DA8 disassemble tool kit packs three ultra-thin stainless steel blades for mobile phone screen separation and tin scraping rework. The 3mm, 5mm and 8mm blade sizes slide into the gap between the case and the screen, travel along the seam, and open iPhone, iPad, tablet and watch displays without forcing the frame. The rebound-repair blade material keeps its shape under pressure, and the silicone handle gives you a steady, protected grip. Use the same blades for tin planting prep on board pads. Mechanicpk supplies the RF4 RF-DA8 to technicians and repair shops across Pakistan.
In stock
RF4 RF-DA8 Disassemble Tool Kit for Precision Screen Separation
The RF4 RF-DA8 disassemble tool kit gives your bench three ultra-thin stainless steel blades in one pack. It covers the two jobs that fill most repair days: separating adhesive-sealed screens and scraping tin off board pads during rework. RF4 offers the blades in 3mm, 5mm and 8mm sizes, so you match the blade to the seam instead of forcing one profile into every gap. A silicone handle on each blade keeps your grip steady while you work through sealant and protects your hand if a blade slips. If your shop handles iPhone, iPad and tablet display replacements every day, this kit replaces the improvised blades that crack panels and tear flex cables.
Blade Design and Material Behavior
RF4 builds the RF-DA8 blades from a high-toughness material with a rebound repair function. Under pressure the blade flexes and returns to shape, so you keep controlled travel along the seam instead of fighting a permanent bend after a few jobs. The ultra-thin stainless steel profile slides into the gap between the case and the screen, then moves along the edge as the adhesive releases. A thin profile lets you start a separation with a shallow angle, which keeps stress off the display flex underneath.
Soften the adhesive first with a hot air station or a heating pad, and the blade glides through with far less force. The silicone handle gives your fingers a stable pivot, so you control depth with small wrist movements instead of shoulder pressure. Start with the thinnest blade at a corner, widen the gap with the 5mm or 8mm blade, and keep the blade shallow so it never reaches the battery or the display connector.
Where the Kit Fits in Your Repair Workflow
Screen separation opens most display problem jobs. You free the display, open the device, and move to the board or the replacement part. The RF-DA8 handles that first stage on iPhone teardowns, iPad and tablet screens, watch displays and back cover glass.
The same blades also work as tin scraping and tin planting rework tools. During reballing and IC change karna jobs, you scrape old solder and residue from the pads before you apply fresh tin. A thin stainless blade reaches pads that a thicker scraper cannot. Keep the kit beside your soldering station, microscope and PCB holder so blade, heat and magnification share one work area. When you prepare a BGA component for a reballing kit, a clean pad surface decides whether the new balls seat flat.
Why Technicians and Shops Stock This Kit
Repair shops buy the RF-DA8 for three practical reasons. The three-blade pack covers thin seams, medium seams and wider gaps without a second tool purchase. RF4 positions the blades for both disassembly and tin rework, so one pack serves your screen station and your board bench. The compact blades also fit a tool drawer or a technician’s pocket, which suits shops that move between counter jobs and bench work.
When you outfit a new technician, pair this kit with a test box and a multimeter for fault finding after the device opens. Mechanicpk supplies the RF4 RF-DA8 to shops across Pakistan that want a dependable disassemble tool kit with clearly stated capability. Check the specification block below, compare the blade sizes with the seams you open most often, and order the quantity your bench needs.
| Weight | 0.1 kg |
|---|
Key Features
- ✓Three blades in one pack: 3mm, 5mm and 8mm sizes
- ✓Ultra-thin stainless steel profile that slides into tight case-to-screen gaps
- ✓High-toughness blade material with rebound repair function
- ✓Silicone-covered handle for a comfortable, protected grip
- ✓Dual use: screen disassembly and tin scraping rework
- ✓Suitable for iPhone, iPad, tablet, watch and back cover glass work
- ✓Compact blades that fit a tool drawer or pocket
- ✓Fits alongside hot air, soldering and microscope workflows
Specifications
| Brand | RF4 |
|---|---|
| Model | RF-DA8 |
| Category | Mobile Phone Disassembly Tools |
| Compatibility | Universal, not device-specific; works on any device with an accessible pry gap between case and screen |
| Supported Devices | iPhone, iPad, tablets, smartwatches |
| Technology | Ultra-thin high-toughness blade with rebound repair function |
| Material | Stainless steel blades with silicone handles |
Common Repair Uses
- ✓Screen disassembly and board-level tin rework
- ✓LCD and display separation for screen replacement
- ✓Back cover glass removal
- ✓Sliding along the gap between case and screen to open the device
- ✓Display problem repairs that start with a screen lift
- ✓Tin scraping on board pads during rework
- ✓Tin planting preparation
- ✓Pad cleaning before reballing or IC change karna
- ✓Opening tablet and watch screens for service
Compatible Devices
- ✓Universal disassembly scope, not tied to one chipset or model
- ✓iPhone series (screen and back cover glass separation)
- ✓iPad screen opening
- ✓Android tablets
- ✓Smartwatch displays
- ✓Samsung Galaxy phones (screen and case separation)
- ✓Xiaomi phones (screen and case separation)
- ✓Adhesive-sealed smartphone frames with a pry gap
- ✓Other precision electronics with a screen or cover gap
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
Which blade sizes does the RF4 RF-DA8 include?
Can the RF-DA8 blades handle tin scraping on a board?
Related products
QIANLI 008 Cutting Knife Blade for BGA Underfill Removal
Out of stock
Qianli 011 16-in-1 Glue Removal Knife for Mobile Repair
Out of stock
UFI eMMC BGA Soldering Adapter (8 Footprints) for UFI-Box
In stock



