Mijing SR-23 Screen Fixator Fixture for Mobile Repair

₨ 4,500

Side-Hanging Screen Fixture

The Mijing SR-23 screen fixator fixture holds a phone display at a working angle while you test, reconnect or reassemble. A suction cup grips the glass, the frame hangs from the side of the phone, and both your hands stay free for the bench work. The hollow centre keeps the camera area clear, and silicone pads around the frame and base protect the edges. Remove the suction cups and the same fixture turns into a phone holder. The width adjusts, so one unit covers the mixed phone stock a repair shop sees every day.

In stock

19 People watching this product now!
Description

Mijing SR-23 Screen Fixator Fixture for Hands-Free Display Work

The Mijing SR-23 screen fixator fixture gives your repair bench a stable way to hold a phone display while you work on the board, the flex connectors or the camera area. Mijing builds the SR-23 for its maintenance fixture series, and it targets a problem every workshop knows: a display that flops, slides or dangles from its flex cable during testing and reassembly. Instead of propping the screen against a box or a roll of tape, you hang it from the side of the frame and keep both hands free.

How the Side-Hanging Design Holds the Display

The SR-23 works as a side-hanging screen fixture for mobile repair. You tilt the display toward the suction cup and the cup grips the glass, which parks the screen at a working angle while the rest of the phone stays open on your bench. You connect the display flex, power the board, check touch and picture, then reposition the screen without lifting it off the fixture. This workflow saves real time on every display problem or charging issue that needs a screen reconnected and tested before you close the phone. The adjustable width lets you fit different frame sizes, so you do not need a separate holder for each model that walks into your shop.

Camera-Safe Hollow Centre and Frame Protection

Mijing builds the centre of the fixture hollow, and that design keeps the camera area clear and protects the camera module from damage while you work. Silicone pads sit around the fixture and at the base, so the phone frame stays free of marks and you avoid the secondary repair that follows a scratched or dented chassis. The suction cups use PVC plastic that resists deformation, so they keep their grip across repeated use. You can also rotate the held phone freely, which lets you reach connectors and screw points from any angle without releasing the clamp.

Two Modes: Screen Hanger and Phone Holder

Remove the suction cups and the SR-23 becomes a phone fixing fixture for general repair work. That gives you two tools in one footprint: a screen hanger for display testing and a holder for the phone body during hardware fault checks. Place it under a microscope and you steady the phone for close inspection of connectors and ICs. Pair it with a PCB holder when you move from display work to board work, and keep a multimeter nearby for quick continuity and voltage checks. For technicians who handle dozens of phones per day, a dependable fixture like this reduces handling time and lowers the chance of dropping or stressing a freshly fitted screen.

Additional information
Weight0.8 kg
Q & A
Please login to post questions

Key Features

  • Side-hanging fixture that hangs the display from the phone frame
  • Tilts the display toward the suction cup for quick service
  • Removable suction cups convert the fixture into a phone holder
  • Hollow centre design protects the camera during repair
  • Reusable PVC suction cups that resist deformation
  • Free rotation of the held phone
  • Adjustable width for a wide range of phone sizes
  • Silicone pads around the frame and base protect the phone edges

Specifications

BrandMijing
ModelSR-23
CategoryRepair Fixture / Screen Fixator
CompatibilityUniversal mobile phone fixture with adjustable width
Supported DevicesWide range of mobile phone models
MaterialPVC suction cups with silicone protection pads

Common Repair Uses

  • Holding the display and the phone body during repair and testing
  • Holding the display during flex cable reconnection
  • Testing touch and picture after a screen replacement
  • Working on a display problem without a loose panel
  • Hardware fault checks with the phone held steady
  • Charging issue repair with the board exposed
  • Camera area work with the module protected
  • Holding the phone body for close inspection under a microscope
  • Reassembly checks before you close the phone

Compatible Devices

  • Universal, adjustable-width fixture for a wide range of mobile phone models
  • Samsung phones
  • Oppo phones
  • Vivo phones
  • Infinix phones
  • Tecno phones
  • Xiaomi phones
  • Huawei phones
  • iPhone series

FAQ

What is the product name?
The product name is Mijing SR-23 Mobile Phone Screen Fixator Fixture.
What is the brand of this product?
The brand of this product is Mijing.
What is the model of this product?
The model of this product is SR-23.
What is this product used for?
This product is used for holding a phone display at a working angle during testing and reassembly, and for holding the phone body during repair.
Which devices are compatible with this product?
This product is a universal fixture with adjustable width that fits a wide range of mobile phone models.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
Does the Mijing SR-23 protect the camera during repair?
Yes. The hollow centre design keeps the camera area clear and protects the camera from damage during repair.
Can I use the Mijing SR-23 as a normal phone holder without the screen hanging mode?
Yes. The suction cups are removable, and without them the fixture works as a phone fixing fixture for general repair work.