YCS Eepprom Chip Tester 17 IN 1 For iPhone X-13PM

₨ 1

Non-Removal iPhone EEPROM Chip Programmer

The YCS Eepprom Chip Tester 17 IN 1 For iPhone X-13PM is an iPhone EEPROM chip programmer that reads and writes baseband logic EEPROM chips without disassembly. It supports Intel and Qualcomm baseband logic EEPROMs across iPhone X, XS, XS Max, 11, 12 and 13 series phones, including the Pro, Pro Max and mini variants. An integrated OLED screen shows read and write data, while real-time voltage and current detection with a short circuit alarm protects the board during operation. Mechanicpk supplies this fixture to repair shops and service centers that handle baseband and network issue repairs on iPhone logic boards.

Out of stock

11 People watching this product now!
Description

Non-Removal iPhone EEPROM Chip Programmer for Baseband Logic Repair

The YCS Eepprom Chip Tester 17 IN 1 For iPhone X-13PM works as an iPhone EEPROM chip programmer built for one job: reading and writing the baseband logic EEPROM on iPhone X through iPhone 13 Pro Max without taking the board apart. It handles both Intel and Qualcomm baseband logic EEPROM chips, so one fixture covers the data side of baseband work across the X, XS, 11, 12 and 13 series. When a phone arrives with a network issue or a hardware fault in the baseband area, this tool gives your bench a direct path to the EEPROM data.

Baseband Logic EEPROM Access Without Disassembly

The EEPROM beside the baseband logic holds device-specific data the modem side depends on. When that data corrupts, or when a board repair leaves it mismatched, the phone can show signal loss or a dead network section even after the hardware repair itself looks clean. This tester works as a test fixture for those chips, so you read and write the EEPROM data with the phone kept intact instead of pulling the board out of the housing.

That matters on a busy repair bench. Every disassembly adds handling risk to flex connectors, shields and adhesive seals. Keeping the phone assembled during the EEPROM step removes that risk from the job and shortens the time between diagnosis and a tested result.

Technicians in Pakistan see this pattern often on imported and second-hand iPhones: a unit comes in after a logic board swap or an IC repair, the hardware tests fine, and the phone still reports a network issue. Checking the baseband EEPROM data takes that question out of guesswork. You read the chip, compare the result against what you expect and decide on the next step with real data in front of you.

Live Monitoring and Protection During Operation

An integrated OLED screen shows the operation as it runs, and the tool displays baseband logic chip read and write data digitally. You see the data transfer on the fixture itself and do not need to guess whether a read finished.

Real-time voltage and current detection comes with a short circuit alarm. A shorted EEPROM line on an iPhone board punishes careless probing, and the alarm warns you before a fault spreads into the surrounding circuit. The built-in protection mechanism also guards against data loss and device damage during operation, which matters most when you write to a chip on a customer phone with no second chance.

A practical habit helps here: read and save the existing EEPROM data before you write anything new. The read gives you a reference point, and the OLED display lets you confirm each step as the fixture completes it. Your workflow stays controlled from first read to final write.

Where It Fits in the iPhone Repair Workflow

Treat this fixture as a data-stage tool. Diagnose first: measure the main lines with your multimeter, inspect the baseband area under a microscope, and confirm the board holds no short. Run any rework with your hot air station or soldering station, and mount the board in a PCB holder if the repair needs it. Then bring in the EEPROM tester to read the existing data, write the correct data and confirm the chip responds.

The same logic applies across your wider stock. ISP pinout tools and eMMC programmers cover storage chips, UFS adapters handle UFS devices, and test boxes cover other service functions. This tool covers the baseband logic EEPROM on iPhones, a narrow job it does directly. Shops that already run reballing kits for board-level work gain a data tool that completes the same repair chain.

Think of the repair as a sequence. Power and charging checks come first, then board inspection, then any IC-level rework, and the EEPROM step closes the loop before you return the phone. Placing the tester at the end of that sequence gives your final test a data-level confirmation, so you hand the phone back with fewer callbacks for a returning network issue.

Who Gets the Most From This Tester

Repair shops that see iPhone X to 13 series phones every week gain the most. A single device handles the listed models and both Intel and Qualcomm baseband versions, so you do not stock a separate fixture for each generation. Service centers get a repeatable EEPROM step they can place in their standard process, and technicians learning iPhone logic repair get a clear view of read and write activity on the OLED display.

Mechanicpk supplies tools for professional mobile repair workshops, and this fixture suits buyers who already know why baseband EEPROM work matters and want a dedicated, protected tool for it instead of an improvised setup.

Check the supported list before you buy. The verified range runs from iPhone X to iPhone 13 Pro Max, covering the 12 mini and 13 mini as well. Phones outside that range fall outside the verified scope of this tool.

Additional information
Weight1.0 kg
Q & A
Please login to post questions

Key Features

  • Reads and writes baseband logic EEPROM chips without disassembling the iPhone
  • Supports Intel and Qualcomm baseband logic EEPROM chips
  • Covers iPhone X through iPhone 13 Pro Max, including mini and Pro Max variants
  • Integrated OLED screen for monitoring operation
  • Digital display of baseband logic chip read and write data
  • Real-time voltage and current detection
  • Short circuit alarm
  • Built-in protection against data loss and device damage during operation

Specifications

Brand EntityYCS
Product EntityYCS Eepprom Chip Tester 17 IN 1 (iPhone baseband logic EEPROM programmer)
Technology EntityBaseband logic EEPROM read/write, non-removal test fixture, OLED display, short circuit alarm
Compatible Device EntitiesiPhone X, iPhone XS, iPhone XS Max, iPhone 11 series, iPhone 12 series, iPhone 13 series, Intel baseband, Qualcomm baseband
Repair Process EntityBaseband logic EEPROM reading and writing, network issue diagnosis, iPhone logic board repair
Industry EntityMobile repair industry, iPhone PCB repair, Pakistan GSM repair market

Common Repair Uses

  • Reading baseband logic EEPROM data without disassembly
  • Writing or restoring baseband logic EEPROM data
  • Testing the EEPROM chip on an assembled iPhone
  • Diagnosing a network issue after a logic board swap or IC repair
  • Saving a reference read before writing new EEPROM data
  • Verifying EEPROM data after baseband-area rework
  • Watching voltage and current to catch a short on the EEPROM connection
  • Final data-level check before delivery in a service center

Compatible Devices

  • iPhone X to iPhone 13 Pro Max (Intel and Qualcomm baseband logic EEPROM)
  • iPhone X
  • iPhone XS
  • iPhone XS Max
  • iPhone 11 and iPhone 11 Pro
  • iPhone 11 Pro Max
  • iPhone 12 and iPhone 12 mini
  • iPhone 12 Pro and iPhone 12 Pro Max
  • iPhone 13, 13 mini, 13 Pro and 13 Pro Max

FAQ

What is the product name?
The product name is YCS Eepprom Chip Tester 17 IN 1 For iPhone X-13PM.
What is the brand of this product?
The brand of this product is YCS.
What is the model of this product?
The model of this product is YCS 17 IN 1.
What is this product used for?
This product reads and writes baseband logic EEPROM chips on iPhone X to iPhone 13 Pro Max.
Which devices are compatible with this product?
This product is compatible with iPhone X, XS, XS Max, 11, 11 Pro, 11 Pro Max, 12, 12 mini, 12 Pro, 12 Pro Max, 13, 13 mini, 13 Pro and 13 Pro Max.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
Does this tool support both Intel and Qualcomm baseband EEPROM chips?
Yes. It supports Intel and Qualcomm baseband logic EEPROM chips on the listed iPhone models. The verified range ends at iPhone 13 Pro Max, so iPhone 14 and newer fall outside the confirmed scope.
Can I read and write iPhone baseband EEPROM without disassembling the phone?
Yes. The tool works as a test fixture that tests and repairs baseband logic EEPROM chips without disassembly, and it includes real-time voltage and current detection with a short circuit alarm.