UFI eMMC BGA Soldering Adapter Set for UFI-Box

₨ 1,800

UFI Box eMMC BGA Adapter for Direct Chip-Off Programming

This UFI Box eMMC BGA adapter set covers eight BGA footprints: BGA169, BGA153, BGA186, BGA162, BGA221, BGA254, BGA529 and BGA100. It includes a chip programming adapter that connects to your UFI-Box. You solder or seat the eMMC chip in the matching adapter, then read, write and recover data through the box. Technicians use this setup when ISP access is not possible, when the PCB is damaged, or when a dead phone needs a direct chip-level read. One set replaces the need to source a separate adapter for each package type on your bench.

In stock

11 People watching this product now!
Description

UFI Box eMMC BGA Adapter Set for Chip-Level Repair

Chip-off work starts with the right footprint. This UFI Box eMMC BGA adapter set gives your repair bench eight BGA package options, from the common BGA153 and BGA169 up to BGA254 and BGA529, together with the programming adapter that links the chip to your UFI-Box. You remove the eMMC from a dead board, place it in the matching adapter, and talk to the memory directly instead of depending on the phone’s own boot path. That direct route matters for dead after flash cases, boot loop issue and hang on logo faults where the phone no longer responds to normal software methods.

How the Soldering Adapters and Programming Adapter Work Together

The set splits the job into two parts. The BGA soldering adapters carry the eMMC chip in a footprint that matches its ball layout. The CHIP programming adapter then connects that footprint to the UFI-Box, so the box reads the memory as a storage device. You pick the adapter that matches the package printed or identified for your chip, so footprint selection comes first. Pairing the wrong footprint with a chip risks a bad connection or a failed read, so confirm the package before you heat anything.

Covered BGA Footprints for eMMC Work

The product name lists BGA169, BGA153, BGA186, BGA162, BGA221, BGA254, BGA529 and BGA100. BGA153 and BGA169 appear in a large share of Android eMMC repairs, while BGA254 and BGA529 appear on newer memory and multi-chip packages. With this spread you handle most eMMC package types without ordering a new adapter mid-job. Check the exact ball count and chip dimensions of your memory against the adapter before you start.

Where This Set Fits in Your Repair Workflow

Most technicians try ISP first because it avoids removing the chip. When the ISP points are damaged, the board is water-damaged, or the phone is completely dead, chip-off becomes the practical route. You lift the eMMC with your hot air station, clean the balls, seat the chip, and read or write through the UFI-Box. After the memory is repaired or reprogrammed, you reball and resolder it to the PCB, so a reballing kit and a good microscope belong on the same bench.

Practical Handling Tips for Your Bench

Control your hot air temperature and airflow during chip removal, and always pre-heat the board to protect neighboring components. Clean the chip balls before you place it in the adapter, since residue causes poor contact. Keep the adapter pads free of flux. Store each adapter in its slot after use so the pads stay undamaged.

Additional information
Weight0.5 kg
Q & A
Please login to post questions

Key Features

  • Eight eMMC BGA footprints in one set
  • Includes the CHIP programming adapter for UFI-Box
  • Direct chip-level access for dead phones
  • Works when ISP access fails
  • Supports read and write operations through the box
  • Covers common and newer eMMC package types
  • Suits chip-off repair and data recovery
  • Fits the standard reballing and hot air workflow

Specifications

BrandUFI
CategoryeMMC BGA Adapters
CompatibilityUFI-Box
Supported DeviceseMMC memory chips in BGA169, BGA153, BGA186, BGA162, BGA221, BGA254, BGA529 and BGA100 packages
TechnologyeMMC BGA chip-off adapter

Common Repair Uses

  • Data recovery from a dead phone with a removed eMMC
  • Reading eMMC contents when ISP points are damaged
  • Fixing dead after flash faults at chip level
  • Boot loop issue recovery through direct memory access
  • Hang on logo faults that software flashing cannot fix
  • Reprogramming a corrupted eMMC before reballing and resoldering
  • Reading memory from water-damaged boards after chip removal
  • Replacing a failed eMMC and loading it with working firmware

Compatible Devices

  • Verified scope: eMMC memory chips in the listed BGA packages, read and written through the UFI-Box. This is a chip-package match, not a phone-model list.
  • eMMC BGA169 chips
  • eMMC BGA153 chips
  • eMMC BGA186 chips
  • eMMC BGA162 chips
  • eMMC BGA221 chips
  • eMMC BGA254 chips
  • eMMC BGA529 chips
  • eMMC BGA100 chips

FAQ

What is the product name?
The product name is UFI eMMC BGA Soldering Adapter Set with CHIP Programming Adapter for UFI-Box.
What is the brand of this product?
The brand of this product is UFI.
What is the model of this product?
The model of this product is the UFI eMMC BGA Soldering Adapter set for UFI-Box.
What is this product used for?
This product is used for reading, writing and recovering eMMC memory chips removed from a phone board, through the UFI-Box.
Which devices are compatible with this product?
This product is compatible with eMMC chips in BGA169, BGA153, BGA186, BGA162, BGA221, BGA254, BGA529 and BGA100 packages, used with the UFI-Box.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
Which BGA package do I choose for my eMMC chip?
Match the adapter to the package and ball count of your chip, for example BGA153 or BGA169, before soldering or seating it.
When should I use chip-off instead of ISP on a dead phone?
Use chip-off when ISP points are damaged, the board is water-damaged, or the phone stays dead and ISP gives no response.