338S00819-A1 Camera Power Supply IC for iPhone 14 Series

₨ 600

Camera Power IC for iPhone 14 Series

338S00819-A1 is a camera power supply IC listed for the iPhone 14 series, including the iPhone 14, 14 Plus, 14 Pro and 14 Pro Max. When a rear or front camera stops initialising, the camera power rail is one of the first places a technician checks. This IC suits board-level repair shops that already handle camera faults and have a hot air station, microscope and multimeter on the bench. Confirm the part number against the donor board before ordering, because each iPhone generation uses its own camera power IC.

16 People watching this product now!
Description

338S00819-A1 Camera Power IC for iPhone 14 Repair

The 338S00819-A1 camera power IC is a board-level component for the iPhone 14 series camera subsystem. Repair catalogues associate this part number with the iPhone 14, 14 Plus, 14 Pro and 14 Pro Max, so the match has to be checked against the donor board’s marking before installation. For a repair shop, this IC belongs in the camera fault workflow, where the camera power rail is tested before any component is replaced. The sections below cover where the IC fits, how it is handled on the bench, and how to confirm the right part.

Where This IC Fits in the Camera Power Path

Camera power ICs of this type regulate supply rails that feed the camera modules. When one fails, the camera may stop initialising, the preview can go black, or the phone may report a camera error. Check the camera connector rails with the board powered before you lift the chip, because a damaged flex connector or a shorted camera module can produce the same symptoms. Replacing a healthy IC wastes time and risks damaging the pads.

Bench Workflow for Replacement

Remove the IC with a hot air station at a controlled temperature, then clean the pads with flux and wick. Inspect the pads under a microscope for lifted or damaged traces before placing the new part. Apply fresh solder paste or flux, align the IC carefully, and reflow it. Power the board and measure the camera rails again with a multimeter before reassembly to confirm the output is present.

Verifying the Correct Part Before Ordering

Read the printed marking on the donor IC and match it to 338S00819-A1 before you order. The same camera function appears on several iPhone generations under different part numbers, so a visually similar IC can be the wrong one. Confirm that the donor board belongs to the iPhone 14 series. If the marking does not match, check the board model and the part number on the schematic before proceeding.

Additional information
Weight0.1 kg
Q & A
Please login to post questions

Key Features

  • Camera power supply IC, part number 338S00819-A1
  • Listed for the iPhone 14 series
  • Suited to hot air board-level replacement
  • Requires microscope inspection and reflow for clean installation
  • Identify by printed marking before ordering

Specifications

Model338S00819-A1
CategoryMobile Phone Camera Power ICs
CompatibilityiPhone 14 series
Supported DevicesiPhone 14, iPhone 14 Plus, iPhone 14 Pro, iPhone 14 Pro Max
TechnologyCamera power supply IC

Common Repair Uses

  • Board-level camera power repair on iPhone 14 series logic boards
  • No camera detected or camera fails to initialise
  • Black camera preview or camera app errors
  • Camera power rail faults after drop or liquid damage
  • IC replacement during board-level camera repair
  • Pad and trace inspection after hot air removal

Compatible Devices

  • iPhone 14 series (device-specific, per catalogue listing)
  • iPhone 14
  • iPhone 14 Plus
  • iPhone 14 Pro
  • iPhone 14 Pro Max

FAQ

What is the product name?
The product name is 338S00819-A1 Camera Power Supply IC.
What is the model of this product?
The model of this product is 338S00819-A1.
What is this product used for?
This product is used for board-level replacement of the camera power supply IC on iPhone 14 series logic boards.
Which devices are compatible with this product?
This product is listed for the iPhone 14, iPhone 14 Plus, iPhone 14 Pro and iPhone 14 Pro Max.
Is this IC interchangeable with the iPhone 13 camera IC?
No. The iPhone 13 camera power IC uses a different part number, 338S00762-A1, so match the part number on the donor board before ordering.
Can a dead camera always be fixed by replacing this IC?
No. Check the camera connector, flex cable and rail voltages with the board powered first, because a faulty camera module or connector can cause the same symptoms.