AY A108 Multi-function Dot Matrix Battery Repair Programmer
₨ 1
Solder-Free Battery and Face ID Programming for iPhone
The AY A108 Multi-function Dot Matrix Battery Repair Programmer for iPhone 8 to 14 Pro Max reads and writes battery data and handles dot matrix Face ID repair. It connects over USB and runs through the AY Assistant software. Face ID repair on iPhone X through 12 Pro Max uses replacement dot matrix flex cables, so no soldering is needed for that path. Before any write, the software backs up the existing dot matrix data to the cloud. Dot projector detection helps separate software faults from hardware faults before you open the phone further.
Out of stock
The AY A108 Multi-function Dot Matrix Battery Repair Programmer for iPhone 8 to 14 Pro Max covers two fault groups that appear steadily on Apple repair benches: battery data and Face ID dot matrix data. It connects to a computer over USB and runs through the AY Assistant software, which controls every read and write session. Begin each job by reading the current battery and dot matrix values, because that read is your diagnostic step and it shows what the stored data looks like before you change anything. Back up the existing data to the software’s cloud store before any write, since a clean backup gives you a recovery point if a session fails partway. Next, compare the dot matrix code against the infrared code, and write corrected values only when the comparison shows a mismatch. Working in this order keeps original calibration intact and reduces the chance that a battery job turns into a Face ID complaint. The battery function covers reading and writing battery information, which places battery health and battery replacement jobs inside the programmer’s scope. The Face ID function covers dot matrix repair from iPhone X through 14 Pro Max. On iPhone X through 12 Pro Max, the solder-free path uses a replacement dot matrix flex cable, so you swap the flex instead of reworking a small dot matrix circuit on the board. The bundled kit lists flex cables and activation modules for the relevant range, which keeps the parts list short for a shop stocking this device. Dot projector detection lets you check whether the projector module responds, which helps you separate a software fault from a hardware fault before you open the phone further. Connect the wires to the damaged dot matrix or fuse area only when the diagnostic points there, and keep each contact clean and firm, because loose contacts create false readings. Within a PCB repair process, this programmer sits at the diagnostic and data-restore stage, before any rework or part replacement begins. Board-level faults outside the dot matrix flex path still need a rework station, so keep a microscope, a hot air station, and a multimeter in the workflow for those cases. Check board continuity with a multimeter before you assume a Face ID fault is data-only, and inspect the connector area under a microscope for lifted pads. The firmware updates online for free, so the device gains support as the vendor adds coverage for newer iPhone models. The kit listings also include True Tone repair modules for selected models, which extends the box into screen calibration work for the iPhone 7 to 11 Pro Max range and the 13 Pro to 14 Pro Max range. Multilingual menus help shop teams where staff prefer different interface languages, and the software layout stays simple for a technician who runs several jobs a day. For a dead phone, the first decision is whether the fault sits in the battery data, the dot matrix, or the board, and this unit gives you a read before you commit to a repair path. A bench that handles Face ID and battery calls every week can replace several single-purpose tools with one workflow. Run the programmer on stable power with a solid USB connection and proper ESD protection, because an interrupted write can leave the board in a worse state than the original fault. Check the phone model against the compatibility scope before you connect anything, since the flex cable and module match depends on the exact iPhone generation. Record each job in a simple log that lists the model, the fault, the values you read, and the final result. That log turns each repair into a repeatable process your technicians can follow, and it shows you which models return with the same fault. Shops deciding whether the programmer fits their volume will find the answer clearest after they count their monthly Face ID and battery calls for one quarter.
| Weight | 0.39 kg |
|---|
Key Features
- ✓Reads and writes iPhone battery data for battery replacement and health correction
- ✓Repairs dot matrix Face ID data across iPhone X through 14 Pro Max
- ✓Solder-free Face ID repair path on iPhone X through 12 Pro Max using replacement flex cables
- ✓Backs up existing dot matrix data to the cloud before any write session
- ✓Dot projector detection to separate software faults from hardware faults
- ✓Controlled through the AY Assistant software over a USB connection
- ✓Free online firmware updates that extend device coverage over time
- ✓Multilingual interface and kit listings that include True Tone repair modules for selected models
Specifications
| Brand Entity | AY |
|---|---|
| Product Entity | AY A108 Multi-function Dot Matrix Battery Repair Programmer |
| Technology Entity | Dot matrix data programming, battery data read and write, dot projector detection |
| Compatible Device Entities | iPhone 8 to 14 Pro Max (battery), iPhone X to 14 Pro Max (Face ID dot matrix) |
| Repair Process Entity | Face ID dot matrix repair, battery health correction, solder-free flex swap |
| Industry Entity | Mobile phone repair tools, Apple repair workflow, PCB diagnostics |
Common Repair Uses
- ✓Battery replacement data correction and battery health work
- ✓Face ID dot matrix repair after screen or battery service
- ✓Solder-free dot matrix flex swap on iPhone X to 12 Pro Max
- ✓Dot projector detection to isolate software and hardware faults
- ✓Pre-write data backup before any repair session
- ✓True Tone calibration work on selected iPhone models
Compatible Devices
- ✓Battery functions cover iPhone 8 to 14 Pro Max. Face ID dot matrix repair covers iPhone X to 14 Pro Max, with the solder-free flex path on iPhone X to 12 Pro Max.
- ✓iPhone 8 to 14 Pro Max for battery data read and write
- ✓iPhone X to 14 Pro Max for Face ID dot matrix repair
- ✓iPhone X to 12 Pro Max for the solder-free dot matrix flex swap
- ✓iPhone 7 to 11 Pro Max for True Tone repair modules (selected kit listings)
- ✓iPhone 13 Pro to 14 Pro Max for True Tone repair modules (selected kit listings)
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
Does this programmer need soldering for Face ID repair?
Does the software back up data before writing?
Related products
JCID P15 Full Set Nand Programmer for iPhone 6-15 Pro Max
Out of stock



