JCID V1S Pro BGA110 Nand R&W Module for iPhone 8-13 Pro Max
₨ 1
BGA110 NAND Read and Write for iPhone 8 to 13 Pro Max
The JCID V1S Pro BGA110 Nand R&W Module is a NAND-level read and write accessory for the JCID V1S Pro programmer. It handles the BGA110 NAND package used on iPhone 8 through 13 Pro Max, covering SYSCFG read and write, full format, and one-key restore. The module installs by swapping the NAND holder on the V1S Pro, so one base unit covers several NAND generations. Repair shops that need dependable NAND data handling across this device range can run it from a single programmer platform.
Out of stock
JCID V1S Pro BGA110 Nand R&W Module: NAND Read and Write Accessory
The JCID V1S Pro BGA110 Nand R&W Module gives your bench direct NAND-level access for the BGA110 package on iPhone 8 through 13 Pro Max. It works with the JCID V1S Pro programmer, which uses a swappable NAND holder for each package size. You get one platform for several NAND generations instead of a separate tool for each one. This section covers where the module fits in your repair workflow, what it supports according to verified sources, and how technicians apply its functions on the bench.
Where the Module Fits in a NAND Repair Workflow
NAND faults usually surface as failed restores, corrupted SYSCFG data, or a boot loop after a bad flash attempt. Your first step is to read and back up the original NAND data before any board-level work begins. This module handles that read on BGA110 chips, so the device’s identity data stays intact before you touch the board. After the repair, the same module writes the data back or formats the chip. It sits between diagnosis and final restore, which makes it a core step in your NAND service process.
Compatibility Scope and Setup
The module supports BGA110 NAND on iPhone 8 through 13 Pro Max and runs on the JCID V1S Pro programmer. Vendor material describes this as the new-generation BGA110 module built for the V1S Pro line. Some older BGA110 modules from the earlier JC range do not work on the V1S Pro, so confirm your module revision before you order. iPhone 14 series NAND uses the separate BGA315 module, and iPhone 6s to 7 Plus NAND uses the BGA70 module. Plan your module set by device family. Switching to this module takes only a holder swap on the V1S Pro.
Functions and Operational Use
In daily use, the module covers SYSCFG read and write, full NAND format, and one-key restore for NAND repair errors. Distributor listings also include NAND capacity correction and WiFi unlock through SYSCFG edits. The V1S Pro can run these operations standalone over WiFi, so you do not need a computer at the bench. Use the full format function when a chip returns errors after a failed flash, and use one-key restore when you need a quick return to a known-good NAND state. Always back up SYSCFG before any write, because a wrong write can leave a working unit unusable.
| Weight | 0.49 kg |
|---|
Key Features
- ✓Reads and writes BGA110 NAND for iPhone 8 through 13 Pro Max
- ✓Installs on the JCID V1S Pro programmer through a NAND holder swap
- ✓Supports SYSCFG read and write operations
- ✓Provides full NAND format for chips returning errors
- ✓Offers one-key restore for NAND repair errors
- ✓Handles NAND capacity correction
- ✓Supports WiFi unlock through SYSCFG edits
- ✓Operates standalone on the V1S Pro without a computer
Specifications
| Brand Entity | JCID |
|---|---|
| Product Entity | JCID V1S Pro BGA110 NAND R&W module |
| Technology Entity | BGA110 NAND flash, SYSCFG data, NAND read and write |
| Compatible Device Entities | iPhone 8 to 13 Pro Max |
| Repair Process Entity | NAND backup, SYSCFG restore, full format |
| Industry Entity | mobile phone repair tools and programmers |
Common Repair Uses
- ✓Reading and backing up BGA110 NAND SYSCFG data before board-level work
- ✓Writing SYSCFG data to a replacement NAND chip
- ✓Full format and restore after a failed NAND repair attempt
- ✓NAND capacity correction on affected BGA110 chips
- ✓WiFi unlock through SYSCFG edits
Compatible Devices
- ✓iPhone 8 through iPhone 13 Pro Max (BGA110 NAND package)
- ✓JCID V1S Pro programmer (host unit)
- ✓Not for iPhone 14 series NAND (use the BGA315 module)
- ✓Not for iPhone 6s to 7 Plus NAND (use the BGA70 module)
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
Does this module work with the JCID V1S Pro only?
Does this module support iPhone 14 NAND?
Related products
JZQ-599B Soldering Iron Tip Cleaner with Tin Cleaning Ball
Out of stock
QIANLI 008 Cutting Knife Blade for BGA Underfill Removal
Out of stock
Qianli 011 16-in-1 Glue Removal Knife for Mobile Repair
Out of stock



