JCID V1S Pro BGA70 NAND R&W Module for iPhone 6S-7 Plus
₨ 19,500
BGA70 NAND R&W Module for iPhone 6S-7 Plus
The JCID V1S Pro BGA70 module connects to the V1S Pro programmer to read, write and format BGA70 NAND flash on iPhone 6S, 7 and 7 Plus. You swap the NAND holder on the V1S Pro base and work the chip directly, without a separate programmer. Technicians use it for SYSCFG backup and restore, NAND data operations and dead NAND repair on these models. It suits a logic board bench where precise, verified NAND access saves time on every job.
In stock
BGA70 NAND Read Write Module for the V1S Pro Programmer
The BGA70 NAND read write module is an accessory for the JCID V1S Pro programmer, covering the BGA70 NAND flash on iPhone 6S, 7 and 7 Plus logic boards. You fit the module into the programmer’s NAND holder and run read, write and format operations from the same unit you use for other iPhone work. For a technician who already runs the V1S Pro, this module adds a dedicated NAND path without buying a separate BGA70 programmer.
Module Capabilities
The module handles the core NAND tasks on the listed phones. It reads full chip contents, writes data back and formats the NAND. It also backs up and restores SYSCFG data, which holds device identity information that many NAND-level jobs depend on. Every function runs through the V1S Pro software, so update the programmer firmware before you start a job.
JCID has refined BGA70 support across several V1S Pro software releases. Recent updates added specific BGA70 NAND models and fixed an interface freeze that appeared when running BGA70 modules. That fix matters in daily use, because a frozen interface during a write can leave you with a partial image. Check the software version on your programmer before any NAND operation.
Clean contacts make a real difference on small BGA packages. Inspect the holder and module contacts before each insertion and remove any flux residue. Poor contact is a common reason for failed reads, and a clean seat saves you from chasing a fault that exists only on the bench.
Repair Workflow Fit
In a board-level repair, the NAND read sits near the start of the process. Read the original dump first, check the SYSCFG block, and then decide whether the fault is data-side or hardware-side. A clean read confirms the chip still responds. A failed read points toward a physical fault in the NAND package, which may call for reballing or chip replacement.
This sequence saves rework time. Many iPhone faults that look like a dead phone start with a data problem rather than a failed component. Confirming the NAND state before you lift a chip keeps you from replacing parts that still work. The same read also gives you a reference image to compare after any rework.
Operators who log each job gain the most. Record the software version, device model and read result for every board. Repeat reads on the same board then show whether a fault is changing, which supports cleaner repair decisions and clearer conversations with customers.
The module fits shops that handle a steady volume of iPhone 6S to 7 Plus boards. Service centers covering older iPhone generations get the most value, because one V1S Pro platform covers several NAND packages. Pair the module with a reballing kit, a microscope, hot air station and multimeter for a complete NAND workflow.
Buying Notes
Confirm you own a V1S Pro programmer before you order, because this module works as its accessory and does not run on its own. Confirm the target device is an iPhone 6S, 7 or 7 Plus with a BGA70 NAND package. Other iPhone generations use different NAND packages. The iPhone 8 to 13 Pro Max range uses the BGA110 module, and the iPhone 14 series uses the BGA315 module.
Technicians working on mixed iPhone stock should keep the BGA70, BGA110 and BGA315 modules in step with their programmer software. Verify the NAND package against the device before every job to avoid wasted reads and unnecessary board handling.
| Weight | 0.49 kg |
|---|
Key Features
- ✓Reads, writes and formats BGA70 NAND flash
- ✓Backs up and restores SYSCFG data
- ✓Plugs into the V1S Pro NAND holder system
- ✓Supports BGA70 NAND models added in later V1S Pro software updates
- ✓Covers iPhone 6S, 7 and 7 Plus NAND packages
Specifications
| Brand | JCID |
|---|---|
| Category | Mobile Repair Programmer Module |
| Compatibility | JCID V1S Pro programmer |
| Supported Devices | iPhone 6S, iPhone 6S Plus, iPhone 7, iPhone 7 Plus |
| Technology | BGA70 NAND flash |
Common Repair Uses
- ✓NAND-level read, write and format work on BGA70 packages, SYSCFG backup and restore, dead NAND diagnosis, and data verification before board rework
- ✓NAND read and full chip dump
- ✓NAND write and data restore
- ✓NAND formatting
- ✓SYSCFG backup and restore
- ✓Dead NAND diagnosis
- ✓Pre-rework data verification
Compatible Devices
- ✓JCID V1S Pro programmer (host unit), iPhone 6S, iPhone 6S Plus, iPhone 7, iPhone 7 Plus (BGA70 NAND)
- ✓JCID V1S Pro programmer (required host)
- ✓iPhone 6S
- ✓iPhone 6S Plus
- ✓iPhone 7
- ✓iPhone 7 Plus
FAQ
What is the product name?
What is the brand of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
Does this module work without the V1S Pro programmer?
Which iPhone models use the BGA70 NAND that this module supports?
Related products
QIANLI 008 Cutting Knife Blade for BGA Underfill Removal
Out of stock



