MECHANIC TP01 ESD IPA Pump Bottle for Alcohol Storage
₨ 350
Controlled IPA Dosing with an ESD-Safe Pump Bottle
The MECHANIC TP01 is an ESD-marked plastic bottle with a built-in dispenser pump, built for storing and dosing isopropyl alcohol at the repair bench. Each press releases a controlled amount, which keeps liquid off the board and out of your work area. It comes in 100ml and 200ml versions, so you can match the size to a portable kit or a fixed station. Use it for flux removal, contact cleaning, and board preparation before inspection. The ESD marking supports safer handling around static-sensitive electronic components. Choose the 100ml size for mobile work and the 200ml size for a permanent station.
In stock
ESD IPA Pump Bottle for Alcohol Storage at the Repair Bench
An ESD IPA pump bottle is one of the small accessories that quietly saves time and consumables at the repair bench. The MECHANIC TP01 pairs a plastic body with an ESD marking and a pump that releases a controlled amount of isopropyl alcohol on demand. Instead of pouring from a large container, you dispense only what the job needs, which limits spills and evaporation. Technicians working on logic boards, charging ports, and flux cleanup often keep one bottle at each station for daily work. Mechanicpk stocks the TP01 for shops that want a dependable, low-cost dispenser for routine board cleaning.
Controlled Dispensing That Cuts Waste
The pump is where this bottle earns its place on the bench. Each press releases a measured amount of liquid, so you apply only what the joint, contact, or pad actually needs before moving on. Open pouring tends to send far more alcohol across the board than the cleaning task requires, and that surplus can spread into nearby components or dry unevenly on the surface. A pump keeps the flow predictable from one cleaning cycle to the next, which builds a habit of dosing the same amount each time. Over a full week of board work, that consistency adds up to noticeably less wasted IPA and fewer refills. A controlled volume also makes inspection easier, because you can see exactly where the solvent has reached and where it has not.
ESD-Marked Plastic Body for Sensitive Boards
The TP01 carries an ESD marking, which signals that it suits work around static-sensitive electronics. Static discharge is a quiet risk on modern boards, where small surface-mount parts can fail from a charge you never feel. Keeping your solvent in a dedicated ESD-marked bottle is a simple step inside a wider anti-static routine that also covers grounded mats and wrist straps. The body uses plastic, a practical material for repeated filling, cleaning, and refilling at the station. Confirm chemical compatibility before storing any solvent other than isopropyl alcohol, because bottle materials respond differently to different liquids. Label the bottle clearly, keep it away from heat sources, and protect both the contents and the pump.
Choosing Between 100ml and 200ml Capacities
The TP01 comes in two capacities, and the right choice depends on how your work is structured. The 100ml version suits a portable toolkit or a technician who moves between customer sites during the day. The 200ml version fits a fixed repair bench where alcohol gets used constantly, and it cuts down how often you refill. Both sizes come from the same TP-01 series, which makes it easy to stock them together. Estimate your typical weekly IPA consumption before buying, then pick the size that avoids both constant refilling and a bottle that sits half-used for months. A half-used bottle also risks evaporation and contamination, which is why sizing matters. For bulk supply, refill the TP01 from a larger stock container rather than pouring straight from the original bottle, which keeps the working supply clean.
| Weight | 0.5 kg |
|---|
Key Features
- ✓ESD-marked body for static-aware handling
- ✓Plastic construction
- ✓Pump dispensing for controlled liquid output
- ✓Two capacities: 100ml and 200ml
- ✓Reduces spills during dispensing
- ✓Designed for IPA dispensing at the workbench
- ✓Suitable for soldering and PCB cleaning tasks
- ✓Compact format for portable or station use
Specifications
| Brand | MECHANIC |
|---|---|
| Model | TP01 |
| Category | Repair Accessories |
| Compatibility | Universal, not device-specific |
| Technology | ESD-marked dispenser pump |
| Material | Plastic |
Common Repair Uses
- ✓Board cleaning and contact preparation workflows
- ✓Cleaning flux residue after soldering on mainboards
- ✓Wiping charging port and contact pads before testing
- ✓Preparing a PCB surface before rework or reballing
- ✓Clearing dust and oil from connector pins
- ✓Dispensing IPA for flex and ribbon contact cleaning
- ✓Removing residue from a board after IC replacement
- ✓Cleaning the work area around rework sites before inspection
- ✓Daily cleaning routine at a fixed repair station
Compatible Devices
- ✓Universal scope, not device-specific
- ✓Universal, not device-specific: any smartphone or tablet board
- ✓Isopropyl alcohol (IPA) as the primary solvent
- ✓Mainboards of any smartphone or tablet brand
- ✓Laptop and motherboard PCBs
- ✓Charging port and connector contact areas
- ✓Logic board surfaces before inspection
- ✓Fixed repair bench and portable toolkit use
- ✓Repair shops and service centers stocking general cleaning supplies
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
What capacity sizes does the MECHANIC TP01 come in?
Can the TP01 bottle store solvents other than IPA?
Related products
Qianli 011 16-in-1 Glue Removal Knife for Mobile Repair
Out of stock



