YCS iPhone 11 Series Motherboard Tester Socket
₨ 18,000
iPhone 11 Motherboard Test Fixture
The YCS iPhone 11 Series Motherboard Tester Socket lets you check the upper and lower logic board layers of iPhone 11, 11 Pro and 11 Pro Max models before final soldering. You hold the sandwich board in position, test each layer, and isolate faults without repeating disassembly cycles. The socket suits repair benches that handle high volumes of layered iPhone boards and need repeatable, lower-risk diagnosis. It helps you cut heat cycles on the CPU area and keep a cleaner workflow between diagnosis and reassembly. Every test becomes faster and easier to repeat across the series.
Out of stock
The YCS iPhone 11 Series Motherboard Tester Socket serves technicians who need to check each layer of the iPhone 11 logic board before the final soldering. The iPhone 11 board is a sandwich of two layers joined together, so a fault on one layer often hides behind the joint. Testing usually means splitting the stack, repairing one side, and rejoining them, and that is where repeated heating causes damage. This socket holds both layers in alignment so you can test the upper and lower boards in place, without disassembling and reassembling the stack after every check. Its role sits in the diagnosis stage of the repair flow: after initial inspection and before you commit to a final reflow. Used this way, the socket reduces heat cycles on the CPU area, lowers the risk of lifted pads and tin damage, and gives you a clear reading before reassembly. For Pakistani workshops handling dead phone and boot loop cases on iPhone 11, 11 Pro and 11 Pro Max, that means shorter turnaround and fewer comebacks. Start your bench routine with tools and power prepared. Set the socket on a stable holder, confirm the connector layout matches the model you are testing, and seat the board in its correct orientation without forcing it. Once aligned, run your checks in a fixed order: power and charging path first, then display and touch, followed by camera, Wi-Fi and Face ID where your test process covers them. Log each reading, because a clear record shows whether the fault sits on the upper layer, the lower layer, or the joint between them. Power off before you remove the board, and keep contacts free from fingerprints and flux residue. Series coverage is the key buying point. The socket supports the iPhone 11, iPhone 11 Pro and iPhone 11 Pro Max, all of which use the same layered logic board approach. Confirm the model before seating any board, because connector positions differ enough between models that a mismatch gives false readings or stresses the board. Boards outside this series fall outside the verified scope of this listing, so check compatibility with your supplier before using the socket on another model. Layered-board work shows the benefit most clearly in the repair sequence. A common case is a board that boots, then hangs on logo, or a phone that charges but shows no display. Splitting the stack and testing each layer tells you whether the problem comes from an IC, a jumper or a connector before any soldering commitment. Many benches reflow the full stack twice in this situation, which multiplies the risk. A test socket removes that guesswork and keeps rework focused on the faulty section. Use the socket as part of a consistent workflow. Keep the same test order for every board, record results against the job card, and reuse the socket across the series. The consistent process reduces diagnostic time and improves the reliability of your repairs over time.
| Weight | 0.4 kg |
|---|
Key Features
- ✓Holds the upper and lower logic board layers in alignment during testing
- ✓Covers the iPhone 11, iPhone 11 Pro and iPhone 11 Pro Max series
- ✓Lets you test each board layer separately before final soldering
- ✓Reduces repeated disassembly and reassembly of the sandwich board
- ✓Helps isolate faults to the upper layer, lower layer, or joint
- ✓Supports a fixed, repeatable test order for every board
- ✓Suits workshop benches that handle high volumes of layered iPhone boards
- ✓Lowers the heat cycles applied to the CPU area during diagnosis
Specifications
| Brand Entity | YCS |
|---|---|
| Product Entity | iPhone 11 Series Motherboard Tester Socket |
| Technology Entity | Layered logic board (sandwich board) testing |
| Compatible Device Entities | iPhone 11, iPhone 11 Pro, iPhone 11 Pro Max |
| Repair Process Entity | Upper and lower board diagnosis before final soldering |
| Industry Entity | Mobile repair tools, Pakistan repair market |
Common Repair Uses
- ✓Testing the upper and lower logic board layers before final soldering
- ✓Diagnosing dead phone and boot loop cases on layered boards
- ✓Isolating faults between the upper layer, lower layer, or joint
- ✓Reducing repeated disassembly and reassembly during repair
- ✓Checking the board in a fixed order before reassembly
Compatible Devices
- ✓iPhone 11
- ✓iPhone 11 Pro
- ✓iPhone 11 Pro Max
FAQ
What is the product name?
What is the brand of this product?
What is this product used for?
Who should use this product?
Which iPhone models does this socket support?
Why separate the upper and lower board layers before testing?
Related products
ICFRIEND Easy UFS 6-in-1 Socket for Easy JTAG Plus Box
In stock
ICFRIEND UFS 4 in 1 Socket BGA95 BGA153 BGA254 BGA297
Out of stock
YCS iPhone 12 Series 4-in-1 Motherboard Tester Socket
Out of stock



