YCS iPhone X Series Motherboard Tester Socket

₨ 24,000

iPhone X Layered Board Testing

YCS iPhone X Series Motherboard Tester Socket holds the logic board in a stable test position so you can measure without separating and reassembling the layers after every step. Its beryllium copper spring probes and conical tips keep contact clean and consistent across repeated sessions. One 3-in-1 holder covers the iPhone X, XS and XS Max, so a shop handling mixed intake needs fewer separate jigs. It suits technicians who want faster triage and less handling stress on traces and pads during board-level diagnosis.

In stock

19 People watching this product now!
Description

The YCS iPhone X Series Motherboard Tester Socket is a layered test fixture for iPhone X logic boards and the XS and XS Max models covered by its 3-in-1 design. Many iPhone X faults sit in a two-layer board, so the upper and lower boards must be separated before a proper check can be made. This motherboard tester socket keeps both layers in a controlled test position, letting you power the device, run your measurements, and confirm the fault without reassembling the board after every step. If you are searching for an iPhone X motherboard tester socket for daily diagnostics, this holder fits the routine of a professional bench where time per device matters. Construction matters as much as layout at board level. The fixture uses imported beryllium copper spring probes, a material that delivers high conductivity, strong overload resistance, and minimal deviation in readings. Each probe has a conical design that resists rosin and solder residue, which keeps contact points clean and extends probe service life. A snap-on design holds the motherboard flat during probing, because small shifts in probe position can change a reading and send a technician down the wrong fault path. Stable contact gives you more consistent data from one session to the next, which is what a repair bench needs when it logs repeat faults. Within a typical workflow, the socket sits early in board-level diagnosis. You open the device, separate the layers as the job requires, seat the logic board in the fixture, and run the first round of checks on power rails, boot behavior, and signal presence. Once the faulty area is identified, the board moves to IC removal or reballing on a separate station, then returns to the fixture for retesting before reassembly. That sequence limits handling stress on traces and pads, which is why a dedicated holder beats holding a board in your hand during every measurement. For shops across Pakistan, where dead phone intake and boot loop issues often arrive on the same day, a stable test position speeds up triage. You can confirm whether the fault sits on the logic board or in a peripheral section before committing time to component work. Pair the socket with a current-limited DC power supply for controlled power-up, a multimeter for continuity and voltage checks, and a microscope for pad inspection, so diagnosis runs on one bench from start to finish. Keep the probe tips clean with isopropyl alcohol and a soft brush, and keep the fixture covered between jobs to protect the probes. The socket belongs to a wider chain of mobile repair tools, and your choice of companion equipment shapes how much value it adds. Hot air stations and soldering stations handle the rework stage, test boxes support controlled power testing, and reballing kits with PCB holders cover the board-level repair that follows a confirmed fault. For storage or firmware issues, such as dead after flash cases, ISP pinout tools and eMMC programmers address a different part of the workflow and sit alongside this fixture rather than replacing it. Technicians who grow from basic diagnostics into full board rework will find this socket a stable first step on that upgrade path. Mobile repair technicians, GSM service centers, electronics repair professionals, and technical training institutes will get the most from this fixture, especially those who handle iPhone X series boards regularly. Repair shop owners who want a consistent test setup across several technicians benefit as well, since one shared fixture keeps the method uniform from person to person. Verify the model variant against your intake before ordering, because the X, XS and XS Max scope is what the supplier specifies for this 3-in-1 version, and your bench needs should match that scope.

Additional information
Weight0.4 kg
Q & A
Please login to post questions

Key Features

  • Holds the layered iPhone X logic board in a stable test position, so you measure without repeated disassembly
  • Uses beryllium copper spring probes with high conductivity and strong overload resistance
  • Conical probe design resists rosin and solder residue and helps extend probe life
  • Snap-on design keeps the motherboard flat and stable during probing
  • One 3-in-1 holder covers iPhone X, XS and XS Max, reducing the need for separate jigs
  • Limits handling stress on traces and pads by reducing repeated board removal
  • Supports first-stage checks such as power and boot testing before component-level rework
  • Gives a shared workshop one consistent test setup across multiple technicians

Specifications

Brand EntityYCS
Product EntityiPhone X motherboard tester socket, layered motherboard test fixture
Technology EntityBeryllium copper spring probes, conical probe design, snap-on holding design
Compatible Device EntitiesiPhone X, iPhone XS, iPhone XS Max
Repair Process EntityLayered board diagnosis, power and boot testing, pre-rework fault isolation, retesting before reassembly
Industry EntityMobile repair tools, board-level PCB repair, GSM service center equipment

Common Repair Uses

  • Logic board fault diagnosis on layered iPhone X series boards
  • Power and boot checks on separated boards for dead phone cases
  • Isolating a boot loop issue before component-level rework
  • Pre-rework testing to confirm the fault location
  • Retesting after IC removal or reballing, before reassembly
  • Reducing repeated disassembly during repeat diagnostic sessions

Compatible Devices

  • iPhone X
  • iPhone XS
  • iPhone XS Max
  • Scope: iPhone X series, 3-in-1 variant (X, XS, XS Max) per supplier specification

FAQ

What is the product name?
The product name is YCS iPhone X Series Motherboard Tester Socket.
What is the brand of this product?
The brand of this product is YCS.
What is the model of this product?
The model of this product is YCS Motherboard Test Fixture Repair Holder.
What is this product used for?
This product holds a layered iPhone X motherboard in a stable position for testing and retesting without repeated disassembly.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, training institutes, and professional users.
Which devices are compatible with this product?
This product is compatible with iPhone X, iPhone XS, and iPhone XS Max, based on the supplier’s 3-in-1 specification.
Which iPhone models does this socket fit?
This 3-in-1 version is specified for iPhone X, XS, and XS Max. Other iPhone generations use separate YCS fixtures, so confirm the exact model before ordering.
Does this socket use spring probes for accurate readings?
Yes. It uses beryllium copper spring probes with conical tips, which support high conductivity and consistent contact during repeated testing.