JCID P15 BGA315 Nand Socket for iPhone 14-15 Pro Max
₨ 29,500
BGA315 NAND Socket for iPhone 14-15
The JCID P15 BGA315 Nand Socket is the module for reading, writing and repairing Apple BGA315 NAND chips with the JCID P15 programmer. It covers iPhone 14 through iPhone 15 Pro Max, iPhone SE (3rd generation), iPad Air 5 and iPad 10th generation. The module gives your workshop a dedicated BGA315 connection point, so you do not need to adapt an older module for newer boards. Pair it with the P15 programmer and the JCID software on a connected computer to run NAND read, write and format operations on the bench.
In stock
The JCID P15 BGA315 Nand Socket is the BGA315 NAND module for the JCID P15 programmer, built for technicians who work on iPhone 14 and 15 series boards and on the newer iPad models in the same NAND generation. If your bench already runs P15 for older Apple NAND, this module extends the same workflow to BGA315 chips, so you can read, write, format and repair NAND without switching to a different toolchain. The compatible range includes iPhone 14, iPhone 14 Plus, iPhone 14 Pro, iPhone 14 Pro Max, iPhone 15, iPhone 15 Plus, iPhone 15 Pro, iPhone 15 Pro Max, iPhone SE (3rd generation), iPad Air (5th generation) and iPad (10th generation). The module sits inside the P15 programmer’s modular setup, which is built around four Apple NAND packages: BGA60, BGA70, BGA110 and BGA315. Each package has its own module, so BGA315 is the one you add when your target is a 14 or 15 series device. In a typical board-level job, you confirm the NAND package first, then seat the chip on the correct module before starting any read or write. Getting that match right at the start saves time and prevents failed operations that come from using the wrong module. The P15 programmer supports reading and writing of these NAND chips, along with NAND formatting and repair. It also supports factory code query, which helps you confirm device information before you move into chip-level work. For boards that enter DFU purple screen mode, the P15 range supports read and write of the NAND without full disassembly, which speeds up triage when a device will not reach a normal boot. The P15 workflow also includes unbinding of paired accessories, a step that matters when a device carries pairing data that interferes with the repair. Every operation runs through the JCID software on a computer connected to the programmer, and you should log in to the software before connecting the programmer. That login step keeps the programmer ready for your session and avoids interrupted operations mid-job. For a shop handling a steady flow of iPhone 14 and 15 repairs, the BGA315 module pays back its cost by keeping NAND work in one system. You avoid mixing modules across generations, and your technicians learn one consistent process for the full Apple NAND range. Keep the module clean and seated flat on the programmer, and inspect the contact area before each job, because a worn or dirty contact point is the most common cause of unstable reads. Store the module in its case when not in use, and keep the programmer connected to a stable power source during write operations. If you plan to add coverage later, the BGA60, BGA70 and BGA110 modules fit the same programmer, so one P15 unit can grow with your device intake. This makes the JCID P15 BGA315 Nand Socket a practical purchase for any workshop, service center or training institute that needs dependable BGA315 NAND capability for current Apple devices.
| Weight | 0.2 kg |
|---|
Key Features
- ✓Dedicated BGA315 NAND module for the JCID P15 programmer
- ✓Covers iPhone 14 series, iPhone 15 series, iPhone SE (3rd generation), iPad Air 5 and iPad 10th generation
- ✓Supports NAND read and write operations
- ✓Supports NAND formatting and repair
- ✓Enables factory code query before board-level work
- ✓Supports purple screen (DFU) mode read and write without disassembly
- ✓Supports unbinding of paired accessories through the P15 workflow
- ✓Operates through the JCID software on a connected computer
Specifications
| Brand Entity | JCID (Shenzhen JC Innovation Device Co., Ltd.) |
|---|---|
| Product Entity | JCID P15 BGA315 Nand Socket, BGA315 NAND module |
| Technology Entity | Apple BGA315 NAND flash, NAND read and write, DFU purple screen mode |
| Compatible Device Entities | iPhone 14 series, iPhone 15 series, iPhone SE (3rd generation), iPad Air (5th generation), iPad (10th generation) |
| Repair Process Entity | NAND read and write, NAND formatting, factory code query, board-level NAND repair |
| Industry Entity | Mobile phone repair, Apple NAND programming, mobile repair tools Pakistan |
Common Repair Uses
- ✓Reading and writing NAND on iPhone 14 and 15 series boards
- ✓NAND formatting and NAND-level repair on BGA315 chips
- ✓Factory code query before chip-level work
- ✓Recovering NAND access on devices stuck in DFU purple screen mode, without disassembly
- ✓Unbinding paired accessories as part of a NAND repair job
- ✓Board-level NAND work on iPad Air 5 and iPad 10th generation
Compatible Devices
- ✓iPhone 14, iPhone 14 Plus, iPhone 14 Pro, iPhone 14 Pro Max
- ✓iPhone 15, iPhone 15 Plus, iPhone 15 Pro, iPhone 15 Pro Max
- ✓iPhone SE (3rd generation)
- ✓iPad Air (5th generation)
- ✓iPad (10th generation)
FAQ
What is the product name?
What is the brand of this product?
What is this product used for?
Who should use this product?
Which iPhone models does the BGA315 module support?
Does the BGA315 module work without the P15 programmer?
Related products
JCID P15 BGA70 Nand Socket for iPhone NAND Read Write
Out of stock



