JCID P15 BGA60 NAND Socket for iPhone & iPad Repair
₨ 19,500
BGA60 NAND Module for JCID P15
The JCID P15 BGA60 NAND socket is a plug-in module for the JCID P15 programmer, built for BGA60 NAND flash packages on Apple iPhone and iPad logic boards. Once the module is seated, the P15 handles read, write, format and factory code query on these chips from the same software. Your bench gets a dedicated package path without replacing the whole programmer. Service centers handling dead phones, boot loop cases and NAND-level data recovery can cover more package families through modular expansion on one P15 base.
In stock
JCID P15 BGA60 NAND Socket for Apple NAND Repair
The JCID P15 BGA60 NAND socket extends the P15 programmer to BGA60 NAND packages on Apple devices. JCID builds the P15 as one integrated NAND programmer with interchangeable modules, and the BGA60 option sits alongside the BGA70, BGA110 and BGA315 modules. Your BGA60 jobs run through this module, so that package family is covered without buying a separate machine. For a technician, the module decides which chips the bench can reach. It also decides whether a board-level NAND job is possible before any chip comes off the logic board. Choosing the right module at the start saves time on every repair that follows.
Key Technical Highlights
The P15 platform handles read and write operations on Apple NAND, along with deep format and syscfg data read, write and backup. JCID also lists purple screen mode, which lets you read and write NAND without full disassembly. Factory code query and non-removal restart analysis add diagnostic depth to the same session. Accessory unbind and iPhone capacity expansion round out the function set. Each capability depends on the module seated and the firmware version running on the programmer, so check the current function list before you quote a job. Treat this BGA60 NAND programmer module as a precision interface rather than a generic adapter. Keep the contacts clean and seat the module square before each read cycle, because a misaligned connection produces failed reads that look like a bad chip. JCID also offers remote software upgrades, so the function set can grow after purchase.
Where the Module Fits in Your Repair Workflow
Start every job by confirming that the NAND on the board is a BGA60 package. A mismatched module wastes time and puts the chip at risk, so check the marking and package size against your module list before you seat anything. Your normal sequence runs in three stages: identify and read the NAND, back up syscfg and user data, then format or write the image. A read-first approach gives you a restore point. If a dead phone returns a boot loop after a failed flash, that backup often decides whether the device comes back. When the chip needs fresh solder balls, pair the module with a BGA60 reballing stencil from JCID’s all-in-one range, which lists BGA60 among its supported packages. Keep the board supported during each read cycle so the connection stays steady from start to finish.
Why Repair Shops Choose the P15 Platform
Service centers across Pakistan compare programmers on module range before they compare anything else. One P15 base unit grows with your bench as new package families arrive, so you invest once in the platform and add modules as the work demands. That keeps capital tied up lower than buying a separate tool for each chip size. The BGA60 module fills a practical gap next to the BGA110 and BGA315 packages that appear across Apple repair work. Confirm the module list, firmware support and warranty terms with your distributor before you order, because the function set moves with each JCID software release. A clear spec check upfront keeps your bench productive and protects your customers’ data.
| Weight | 0.2 kg |
|---|
Key Features
- ✓Module for BGA60 NAND packages on Apple devices
- ✓Works as a swappable module on the JCID P15 NAND programmer
- ✓NAND read, write and deep format
- ✓Syscfg data read, write and backup
- ✓Purple screen mode read and write without disassembly
- ✓Factory code query
- ✓Non-removal restart analysis
- ✓Remote software upgrades for the P15 platform
Specifications
| Brand | JCID |
|---|---|
| Model | P15 BGA60 NAND Module |
| Category | NAND Programmer Module |
| Compatibility | BGA60 NAND package, JCID P15 programmer |
| Technology | NAND flash read/write (BGA60) |
Common Repair Uses
- ✓NAND-level repair and data work on BGA60 chips
- ✓NAND read, write and full format
- ✓Syscfg backup and restore before a flash
- ✓NAND-level recovery on dead phones and boot loop cases
- ✓Purple screen mode read and write
- ✓Factory code query
- ✓Restart analysis without removing the chip
- ✓Reballing BGA60 chips with the JCID BGA60 stencil (sold separately)
- ✓Board-level NAND replacement workflows
Compatible Devices
- ✓Apple NAND chips in the BGA60 package, used with the JCID P15 programmer
- ✓Apple iPhone NAND in BGA60 package
- ✓Apple iPad NAND in BGA60 package
- ✓JCID P15 NAND programmer (module-based)
- ✓BGA60 package only; other packages need their own module



