ICFriend E-Mate X 13-in-1 eMMC BGA Adapter Socket
₨ 32,000
Multi-Package eMMC BGA Socket Kit
The ICFriend E-Mate X 13-in-1 eMMC BGA adapter gives your bench direct access to ten common eMMC BGA footprints from one kit. It covers BGA100, BGA136, BGA153, BGA162, BGA168, BGA169, BGA186, BGA221, BGA254 and BGA529 chips, so you can read and write chip data without reballing the package. It connects with the major eMMC service boxes, including Z3X Easy JTAG Plus, Medusa Pro, Octoplus Pro, UFi and Riff. Use it for data recovery, firmware repair and boot repair on handsets where the eMMC has already been removed from the board.
In stock
13 in 1 eMMC BGA Adapter for Direct Chip Read and Write
The E-Mate X 13 in 1 eMMC BGA adapter is a multi-package socket kit built for technicians who work with loose eMMC memory chips. You seat the chip into the matching socket and run the read or write from your service box, so you skip the step of soldering the chip onto a dedicated module for each job. This matters on a busy bench where dead phones arrive with different eMMC packages every week. The kit fits data recovery, firmware repair and boot repair work on Android handsets where the chip has been lifted from the board.
Package Coverage Across Common eMMC Footprints
The adapter covers ten BGA package families: BGA100, BGA136, BGA153, BGA162, BGA168, BGA169, BGA186, BGA221, BGA254 and BGA529. These footprints represent the eMMC packages technicians meet most often in mid-range and entry-level handsets. Read the part code printed on the chip before you seat it, and match the package size and ball count to the correct socket position. Similar-looking packages can differ in pitch, so a quick check at this stage prevents bent contacts and failed reads.
Box Compatibility and Bench Workflow
The kit is listed as compatible with the Z3X Easy JTAG Plus, Z3X Easy JTAG, Medusa Pro, Octoplus Pro, UFi, Riff, Riff Box 2, EMMC Pro Tool, GPG EMMC Box and ATF platforms. Your workflow stays consistent across these boxes. Power down the handset, lift the chip with proper heat control, seat it in the socket, and start the operation from your tool software. Clean the contact area before each reseat, since flux residue and dust on the pins cause unstable connections.
Why Technicians Use a Socket Instead of Reballing
Repeated reballing adds heat cycles to the package and reduces the margin on a sensitive chip. A socket removes that stress for read and write operations, so the chip stays intact for further testing or reuse. Technicians often read a chip several times during data recovery, and each extra reball increases the risk of a lifted ball. For high-volume eMMC work, the socket also shortens turnaround because you skip the reballing station entirely. Keep the socket with its matching package set, and store it in a dry place to protect the contacts.
| Weight | 0.5 kg |
|---|
Key Features
- ✓Ten eMMC BGA package positions in one kit
- ✓Direct chip connection without a dedicated eMMC module
- ✓Compatible with ten eMMC service box platforms
- ✓Supports read and write operations on eMMC chips
- ✓Reduces reballing and repeated heat exposure on the chip
- ✓Suited to data recovery and firmware repair workflows
- ✓Single kit covers several chip packages for bench efficiency
Specifications
| Brand | ICFriend |
|---|---|
| Model | E-Mate X eMMC 13-in-1 BGA Adapter |
| Category | eMMC BGA Socket Adapters |
| Compatibility | Medusa Pro, Octoplus Pro, Z3X Easy JTAG, Z3X Easy JTAG Plus, UFi, Riff, Riff Box 2, EMMC Pro Tool, GPG EMMC Box, ATF |
| Supported Devices | Universal by eMMC package, not device-specific |
| Technology | 13-in-1 multi-package eMMC BGA socket kit |
Common Repair Uses
- ✓Data recovery, firmware work and boot repair on eMMC-based handsets
- ✓eMMC data recovery from dead phones
- ✓eMMC firmware read and write
- ✓Boot repair on handsets with a corrupted eMMC user area
- ✓Backing up eMMC data before a board-level repair
- ✓Verifying a replacement eMMC chip before fitting it
- ✓Chip-off recovery for handsets that will not power up
Compatible Devices
- ✓Universal by eMMC BGA package, not device-specific
- ✓BGA100 and BGA136 eMMC packages
- ✓BGA153 and BGA169 eMMC packages
- ✓BGA162 and BGA186 eMMC packages
- ✓BGA168 eMMC package
- ✓BGA221 eMMC package
- ✓BGA254 eMMC package
- ✓BGA529 eMMC package
- ✓Service boxes: Z3X Easy JTAG Plus, Medusa Pro, Octoplus Pro, UFi, Riff



