Mechanic Multifunctional Repair Blade (5 PCS SET)
₨ 1
Mobile Repair Blade Set for IC and CPU Work
The Mechanic Multifunctional Repair Blade (5 PCS SET) is a mobile repair blade set that gives you five hand-sharpened blade models, Bach1.0 to Bach5.0, one piece each. Each blade is 0.1 mm thin, so it slips into the tight gaps around a glued CPU or IC. You get dedicated shapes for prying glue off chips, scraping IC corners, cutting vinyl, prying IC hard disk chips and separating CPU layers. Technicians who handle board-level repair on dead phones and hardware faults use this set to clear glue cleanly before reballing or chip replacement.
Out of stock
Mobile Repair Blade Set Built for Precise Glue Removal and Chip Prying
This mobile repair blade set from Mechanic gives you five dedicated blade models, Bach1.0 through Bach5.0, one piece each, for the glue-heavy stages of board-level repair. Every blade has its own shape and its own job: prying glue off IC and CPU packages, scraping glue around IC edges, cutting vinyl, prying IC hard disk chips and separating CPU layers. When a dead phone or a hardware fault sends you into a glued board, you pick the blade that matches the chip and the glue instead of forcing one generic scraper to do every task. Mechanicpk stocks the Mechanic Multifunctional Repair Blade (5 PCS SET) for technicians who work at chip level every day.
Blade-by-Blade Technical Breakdown
Bach1.0 pries the glue away from IC and CPU packages. Bach2.0 works as a corner knife, scraping glue along the edges of an IC where a flat blade cannot reach. Bach3.0 carries a specially shaped edge that cuts vinyl without damaging the board underneath. Bach4.0 pries IC hard disk chips, the storage chips you meet during eMMC and NAND work. Bach5.0 pries CPU and IC hard disk chips and also separates CPU layers.
All five blades measure 0.1 mm thick, and the makers hand-sharpen each edge. That thin profile lets you enter small gaps with controlled pressure. The high rigidity keeps the edge steady under load, and the flexibility gives you feel when you work near pads.
Where It Fits in Your Chip-Level Repair Workflow
Glue removal sits in the middle of most rework jobs, so this set connects to several other tools on your bench. You warm the board with Hot Air Stations or Soldering Stations, then lift and clean the glue with the matching blade while a Microscope shows you the pad edges. PCB Holders keep the board steady while you pry, which protects both the blade tip and the pads.
After you remove a chip, you can clean the pads for Reballing Kits and refit the part. For storage chip jobs, the same workflow leads straight into ISP Pinout Tools, eMMC Programmers and UFS Adapters once the chip is out or the test points are clear. Test Boxes and Multimeters then confirm that the repair holds, whether the original fault was a charging issue, a display problem, a network issue or a phone that hangs on logo.
Work at the temperature your repair procedure specifies, and let the blade follow the glue line rather than forcing it under the chip.
Why Technicians Choose This Set
Five fixed models cover the whole glue-and-pry sequence, so you stop swapping between improvised scrapers and single-purpose knives. The shapes map to real tasks, which speeds up repeat jobs in a repair shop or service center. The hand-sharpened edges give each blade a consistent starting point, and the 0.1 mm thickness suits the narrow clearances you see on modern mobile boards.
For a distributor-grade workshop kit, this set gives you broad coverage at a low entry point. Beginners get a clear blade for each stage, and experienced technicians get a backup set that keeps the main blades fresh.
| Weight | 0.5 kg |
|---|
Key Features
- ✓Five blade models in one set, Bach1.0 to Bach5.0, one piece each
- ✓Hand-sharpened blades
- ✓High rigidity with useful flexibility
- ✓0.1 mm blade thickness for tight gaps
- ✓Bach1.0 pries glue from IC and CPU
- ✓Bach2.0 corner knife scrapes glue around IC edges
- ✓Bach3.0 specially shaped edge cuts vinyl without board damage
- ✓Bach4.0 and Bach5.0 pry IC hard disk chips, and Bach5.0 separates CPU layers
Specifications
| Brand | Mechanic |
|---|---|
| Model | Multifunctional Repair Blade 5 PCS Set (Bach1.0, Bach2.0, Bach3.0, Bach4.0, Bach5.0) |
| Category | Mobile Repair Tools – Precision Blades and Glue Removal Tools |
| Compatibility | Universal hand tool, not device-specific |
| Technology | Hand-sharpened thin-blade set, 5 models, 1 piece each |
| Dimensions | 170 x 100 x 15 mm (product size); blade thickness 0.1 mm |
Common Repair Uses
- ✓Glue removal and chip prying during board-level mobile repair
- ✓Prying glue from IC and CPU packages before removal
- ✓Scraping glue from IC edges and corners
- ✓Cutting vinyl without damaging the board
- ✓Prying IC hard disk chips during storage chip replacement
- ✓Separating CPU layers
- ✓Cleaning pads before reballing
- ✓Clearing glue around a chip before hot air rework
- ✓Preparing a board for ISP or eMMC work after glue removal
Compatible Devices
- ✓Universal hand tool, not tied to a single phone brand, model or chipset family
- ✓Universal hand tool, not device-specific
- ✓Mobile phone motherboards of any brand where glue surrounds a chip
- ✓Glue-sealed CPU packages on mobile boards
- ✓Glue around IC edges and corners
- ✓IC hard disk (storage) chips on mobile boards
- ✓Stacked CPU layers that need separating
- ✓Vinyl-covered areas that need a careful cut
- ✓Bare PCB areas that need glue scraping without board damage
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
Which blade in this set separates CPU layers, and which one scrapes glue around IC edges?
How thick are the blades, and do they suit tight gaps on modern boards?
Related products
Qianli 011 16-in-1 Glue Removal Knife for Mobile Repair
Out of stock
RELIFE RL-004SA silicone pad – Anti-slip
In stock
UFI eMMC BGA Soldering Adapter (8 Footprints) for UFI-Box
In stock



