Relife LS5 SE Heating & Holder Pressing Tool
₨ 14,000 Original price was: ₨ 14,000.₨ 10,500Current price is: ₨ 10,500.
Relife LS5 SE Heating and Pressing Tool
The Relife LS5 SE heating and pressing tool gives your repair bench controlled heat and steady pressure for bonding work. Clamp the phone between two platforms, set the temperature on the digital display (up to 80°C), and choose front or back pressing mode. Camera cutouts on the top and bottom platforms protect the lens area, and the unit suits most iPhone and Android bodies. Use it for screen lamination, frame reinforcement, back cover heating, full phone hot pressing and stand hot pressing. Mechanicpk supplies the Relife LS5 SE to Pakistani repair shops and service centers that want repeatable bonding results.
In stock
Relife LS5 SE Heating and Pressing Tool for Controlled Bonding
The Relife LS5 SE heating and pressing tool gives your repair bench a controlled way to bond screens, frames and back covers after adhesive work. You clamp the phone between two platforms, set the temperature on the digital display, and let steady heat and pressure do what hand pressure and a hair dryer never deliver consistently. Mechanicpk lists it for technicians who already run a hot air station and a microscope and now want repeatable results on the bonding side of the job. The platform reaches 80°C, switches between front and back pressure modes, and fits most iPhone and Android bodies according to supplier information.
Bidirectional Pressure That Targets the Side You Are Bonding
The LS5 SE uses bidirectional dynamic holding pressure. You switch freely between a front mode and a back mode, so you apply force to the screen side when you laminate a display and to the rear when you re-seat a back cover. That choice matters on a workshop bench. A loose frame bond after a screen replacement often shows up later as a lifting edge or a display problem, and holding pressure while the adhesive sets prevents most of it.
Both platforms carry camera clearance cutouts at the top and bottom. Your pressing force lands on the flat body of the phone and skips the lens bump, which protects camera modules on recent iPhone and Android models. Supplier information also lists the same cutout layout for stand hot pressing, where you bond a stand or accessory under measured pressure.
Digital Temperature Control Up to 80°C
A digital display shows the set temperature, and you adjust it to match the job. The heating plate reaches 80°C and warms up quickly, so you do not wait long between phones. Suppliers recommend 35–45°C for most repairs, which keeps heat well below what batteries and OLED panels tolerate poorly. Start at the low end, soften the adhesive, press, and raise the setting only when a stubborn bond demands it.
The same heat serves two jobs. You soften old adhesive before you open a frame, and you reactivate adhesive when you close it again. One tool covers both ends of the bonding cycle, which keeps your bench tidier than juggling a heat gun and separate clamps.
Heating Pressure Platform for Mobile Repair Benches
Think of the Relife LS5 SE as the closing step of a repair. You pull a dead phone apart, run your multimeter checks, and do the IC change karna or board work under the microscope on a PCB holder, with your hot air station and soldering station doing the rework. When the hardware fault is fixed and the test box confirms the board is healthy, you still need the phone to close properly. That is where this platform earns its place.
Typical jobs include battery replacement jobs that end with a frame re-bond, charging issue repairs where you reopen the back cover, and screen replacement after a display problem. After a hot air station softens the adhesive for opening, the LS5 SE presses the new bond into shape. If your shop outgrows hand clamping, this is the upgrade step toward a proper bonding workflow.
Buying Notes for Pakistani Workshops
The unit measures 220 x 80 x 215 mm and weighs about 1300 g net, so it fits beside a soldering station without taking over the bench. It runs on AC 110/220V at 50Hz, and suppliers offer a 110V US plug and a 220V EU plug. Pakistan’s mains supply runs at 220V, so confirm the plug type before you order and check that your socket matches. Shop owners who run several benches can add one platform per technician, which keeps bonding and rework from competing for the same tool.
| Weight | 2.25 kg |
|---|
Key Features
- ✓Bidirectional dynamic holding pressure with free switching between front and back modes
- ✓Digital temperature display with adjustable settings
- ✓Heating up to 80°C with fast warm-up
- ✓Camera clearance cutouts on the top and bottom platforms
- ✓Full phone hot pressing and stand hot pressing modes
- ✓Suits most iPhone and Android bodies
- ✓Dual-voltage AC 110/220V operation at 50Hz
- ✓Compact 220 x 80 x 215 mm footprint at about 1300 g net
Specifications
| Brand | RELIFE |
|---|---|
| Model | LS5 SE |
| Category | Mobile Repair Tools > Heating and Pressing Platform |
| Compatibility | Most iPhone and Android phones (supplier-stated) |
| Supported Devices | iPhone and Android smartphones |
| Technology | Bidirectional dynamic holding pressure, digital temperature control up to 80°C, camera clearance cutouts |
| Input Voltage | AC 110/220V, 50Hz |
| Dimensions | 220 x 80 x 215 mm |
| Weight | Approx. 1300 g (net) |
Common Repair Uses
- ✓Bonding and adhesive work at the end of a repair.
- ✓Screen lamination pressure
- ✓Frame reinforcement
- ✓Back cover heating
- ✓Full phone hot pressing
- ✓Stand hot pressing
- ✓Battery bonding
- ✓Adhesive softening before opening a frame
- ✓Adhesive reactivation when closing a frame
Compatible Devices
- ✓Most iPhone and Android phones, as stated by suppliers. No model-by-model list is published.
- ✓iPhone series (supplier-stated: most models)
- ✓Android smartphones (supplier-stated: most models)
- ✓Phones with rear camera modules, protected by the top and bottom cutouts
- ✓Phones that need front-side pressure after screen lamination
- ✓Phones that need rear-side pressure after back cover re-seating
- ✓Phones that need frame reinforcement after reassembly
- ✓Phones that need stand or accessory bonding under pressure
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
What is the maximum temperature of the Relife LS5 SE, and what setting should I use?
Can I switch the pressing side on the Relife LS5 SE?
Related products
ICFRIEND UFS eMMC ISP Adapter for MiPi Tester & F64 Box
In stock



