Relife RL-014A UV Curing Lamp for Mobile Repair
₨ 1
Relife RL-014A UV Curing Lamp
The Relife RL-014A UV curing lamp gives your repair bench a compact, USB-powered UV LED light for hardening UV glue, shadowless glue, optical glue, resin, ink, and photosensitive green oil. A built-in timer with automatic switch-off lets you set the exposure and keep working on the next step. You power it from any USB source, and the lightweight body fits beside a microscope or PCB holder without crowding your bench. Mechanicpk supplies the RL-014A as a UV curing lamp for mobile repair shops that handle jumper wire fixes, solder mask restoration, and screen bonding.
Out of stock
Relife RL-014A UV Curing Lamp for Board-Level and Screen Repair
The Relife RL-014A UV curing lamp is a handheld UV LED light that hardens UV-reactive materials on mobile phone boards and display assemblies. You place the lamp over the work area, start the timer, and let the material set while you prepare the next step. Technicians who handle hardware faults, repaired pads, and bonded screens use it to keep each cured joint consistent from the first job of the day to the last.
Timer and USB Power on Your Bench
The RL-014A runs from a USB cable, so you plug it into a power bank, a charger, or a bench USB port and start working. One button switches it on. The intelligent timing function counts the exposure and shuts the lamp off automatically, which keeps you from leaving the LED running while you solder or inspect another board. The body stays light and compact, so you can hold it over a small area or rest it near the microscope without rearranging your setup.
Materials the RL-014A Cures
The lamp targets UV-reactive materials common in phone repair: UV glue, shadowless glue, optical glue, photosensitive green oil (UV solder mask), resin glue, and ink. Green oil matters most for board work, because it insulates jumper wires and protects repaired traces and pads once it hardens. Optical and UV glue matter for screen and glass bonding. Match the curing time to the material you use and check the cure before you handle the part.
Where It Fits in the Board Repair Workflow
In IC and PCB repair, the lamp comes in after the rework step. You remove the faulty part with a hot air station or soldering station, clean the pads, fix a broken trace or lay a jumper, and check continuity with a multimeter. Then you coat the repair with green oil and cure it under the RL-014A so the fix stays insulated and protected. Technicians who bring back a dead phone with a damaged pad or a charging issue rely on this step to finish the repair cleanly. The same lamp also serves screen refurbishing, where UV adhesive bonds glass and display layers.
Handling and Care
Keep the LED face clean of flux and resin residue so the light output stays even. Avoid looking directly into the UV LED, and keep the beam off your skin. Store the lamp with its USB cable alongside your other bench tools, such as your microscope and PCB holder, so it stays ready for the next board.
| Weight | 0.15 kg |
|---|
Key Features
- ✓UV LED light source for fast curing of UV-reactive materials
- ✓Intelligent timer with automatic switch-off
- ✓USB power supply with cable included
- ✓One-button operation
- ✓Lightweight, compact handheld body
- ✓Cures UV glue, shadowless glue, optical glue, resin, and ink
- ✓Cures photosensitive green oil for board repair
- ✓Suits mobile repair shops, service centers, and workshops
Specifications
| Brand | Relife |
|---|---|
| Model | RL-014A |
| Category | UV Curing Lamp |
| Compatibility | Universal — not device-specific |
| Technology | UV LED with timer and automatic switch-off |
| Input Voltage | 5V via USB |
Common Repair Uses
- ✓Curing UV-reactive materials in board-level and screen repair
- ✓Curing green oil over jumper wires
- ✓Restoring solder mask after pad repair
- ✓Curing UV glue during screen bonding
- ✓Hardening optical glue on glass assemblies
- ✓Setting shadowless glue on small parts
- ✓Curing resin glue on repair components
- ✓Protecting repaired traces on dead phone boards
- ✓Setting UV-curable ink on small parts
Compatible Devices
- ✓Universal UV curing tool — it works on UV-reactive materials, not on specific phone models
- ✓Smartphone motherboards needing UV green oil curing
- ✓iPhone and Android logic boards after jumper or pad repair
- ✓Boards with repaired traces or pads that need insulation
- ✓Display and glass assemblies bonded with UV or optical glue
- ✓Boards with UV glue or shadowless glue applications
- ✓Small electronic components bonded with UV adhesive
- ✓PCB areas coated with photosensitive solder mask
- ✓Resin and ink jobs on small repair parts
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
How is the Relife RL-014A powered?
Can the RL-014A cure green oil on a repaired mobile board?
Related products
ICFRIEND UFS eMMC ISP Adapter for MiPi Tester & F64 Box
In stock
Qianli 011 16-in-1 Glue Removal Knife for Mobile Repair
Out of stock



