VC7916-52 Power IC – VanChip PA Module for Mobile Repair

₨ 350

VC7916-52 Power IC for RF Transmit Repair

The VC7916-52 Power IC is a VanChip RF power amplifier from the VC7916 family. It drives the transmit stage in Android smartphone boards. When it fails, the phone can show no service, lose signal during calls, or develop a short on the battery line that leaves it dead. Mechanicpk supplies the exact -52 suffix, so your replacement matches the marking on the original part. Use it with a hot air station, good flux, and a stable PCB holder for a clean IC replacement. It suits technicians who handle network faults and RF section repair at board level every day.

12 People watching this product now!
Description

VC7916-52 Power Amplifier IC for Board-Level Network Repair

The VC7916-52 power amplifier IC is a VanChip RF front-end component. It boosts the outgoing radio signal before the signal reaches the antenna path of an Android smartphone. Repair shops often list it as the VC7916-52 Power IC, but it works in the RF section, not in power management. A failed PA usually shows up as a network issue: no service, weak bars during calls, or calls that drop as soon as the phone starts transmitting. A shorted PA can also pull the battery line down and leave you with a dead phone. Mechanicpk supplies the exact -52 variant so the replacement matches the original marking on the board.

Where the VC7916-52 Sits in the RF Chain

The transceiver produces a low-power RF signal, and the PA raises it to transmit level before it passes through the switching and filtering stages to the antenna. The VC7916-52 takes its supply from the main battery rail, so it shares that rail with many other sections of the phone. That shared supply explains why one faulty PA can cause problems that look unrelated: it can cause a heavy current draw at power-on, or a phone that powers on but never registers on the network. Knowing this position in the chain lets you separate a PA fault from an antenna, baseband, or software problem before you lift any IC.

Diagnosing a Faulty VanChip VC7916 PA IC

Start with the symptoms. If the phone shows full signal bars but calls fail, or service drops each time the handset transmits, the transmit chain is the first suspect. Next, check the IMEI and baseband version in settings. A blank IMEI points to a software or baseband fault, not the VanChip VC7916 PA IC. For a dead phone that pulls high current from your DC power supply, measure the battery rail to ground with a multimeter. If the rail reads shorted, apply low voltage and use a thermal camera or rosin to find the component that heats up. When the PA area heats first, you have found your fault without guesswork. Under a microscope, also check for corrosion, cracked joints, or liquid damage around the module.

Replacement Workflow on Your Repair Bench

Clamp the board in a PCB holder and shield nearby plastic connectors and small components with heat-resistant tape. Apply quality flux around the PA. Preheat the board, then use your hot air station with even, circular airflow until the solder melts, and lift the old module straight up with tweezers. Clean the pads with flux and desoldering wick until they are flat, then inspect them under a microscope for lifted pads or damaged traces. Before fitting the new part, compare the full marking on the VC7916-52 with the original, including the suffix. Align the module, reflow it with controlled heat, and let the board cool naturally. Then check the battery rail again, power the phone on, and run a test call with mobile data to confirm the transmit chain works.

Building Your Mobile Network IC Toolkit

A reliable mobile network IC repair depends on the right supporting tools. A hot air station with stable temperature control protects the board during removal and fitting. A stereo microscope helps you inspect fine pads around the PA module. A DC power supply with a current display shows short-circuit faults right away, and a multimeter confirms rail continuity after the repair. If your shop handles RF faults regularly, a preheater is a worthwhile upgrade: it reduces the heat each IC change needs and lowers the risk of damage to the board.

Additional information
Weight0.1 kg
Q & A
Please login to post questions

Key Features

  • Exact VC7916-52 marking for a direct one-to-one replacement
  • Genuine VanChip part numbering from the VC7916 PA family
  • Handles transmit amplification in the smartphone RF section
  • Restores network registration and call stability when the PA fails
  • Clears a battery-line short when the original PA has failed short
  • Works with a standard hot air rework and flux process
  • Single-IC supply suited to individual board repairs
  • Pairs with Mechanicpk hot air stations, microscopes, and PCB holders

Specifications

BrandVanChip
ModelVC7916-52
CategoryMobile Phone ICs – RF / PA ICs
TechnologyRF power amplifier (PA) module

Common Repair Uses

  • No service or no network fault caused by a failed PA
  • Weak signal or calls that drop during transmit
  • Dead phone with a short on the battery rail traced to the PA
  • High current draw at power-on caused by a shorted PA module
  • Liquid-damaged RF sections that need a PA IC change
  • Cracked or lifted PA joints after a drop
  • Restoring the transmit chain after other RF section work
  • Refurbishing boards for resale

Compatible Devices

  • Verified at part-number level (VanChip VC7916-52 marking). Device-level fitment was not verified.
  • Android smartphone boards fitted with a VanChip VC7916-52 PA
  • Boards where the original module carries the exact VC7916-52 marking
  • VanChip VC7916-family RF front-end designs that use the -52 variant
  • Boards whose schematic or boardview lists VC7916-52 in the PA position
  • Replacement of a damaged VC7916-52 with the same part number
  • Donor-board recovery for a VC7916-52 RF section
  • Service-center repairs that need a matched PA part
  • Universal across any board that uses this exact part number. It is not tied to one phone model.

FAQ

What is the product name?
The product name is VC7916-52 Power IC.
What is the brand of this product?
The brand of this product is VanChip.
What is the model of this product?
The model of this product is VC7916-52.
What is this product used for?
This product is used for replacing a faulty RF power amplifier in Android smartphones to fix network and transmit faults.
Which devices are compatible with this product?
This product is compatible with any smartphone board that uses a VanChip VC7916-52 PA with the matching marking.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
Can a shorted VC7916-52 PA IC make a phone completely dead?
Yes. The PA takes its supply from the battery rail, so a shorted PA can pull that rail down and stop the phone from powering on. Measure the rail to ground and use a thermal camera or rosin to confirm the PA is the component heating up.
Can I replace VC7916-52 with another VC7916 suffix like -55 or -36?
Match the full marking, including the -52 suffix. VanChip uses the suffix to separate variants within the VC7916 family, so a different suffix may not suit the board’s RF design unless the board’s own schematic confirms it.