Hi6555 V110 Power IC – HiSilicon PMIC for Huawei Boards
₨ 200
Hi6555 V110 Power IC for Huawei Board-Level Repair
The Hi6555 V110 power IC is a HiSilicon power management chip from the Hi655x series, built to feed regulated rails to the processor, memory, and peripheral sections of Huawei and Honor motherboards. Technicians replace it when a board shows no power, abnormal current draw on the DC supply, or a hang on logo that traces back to missing rails. This listing covers the exact V110 revision, so you match the marking on the original chip and keep the PMU version the system expects. Mechanicpk supplies it for repair shops and service centers handling HiSilicon-based Huawei boards across Pakistan.
Hi6555 V110 Power IC for HiSilicon Huawei Motherboards
The Hi6555 V110 power IC belongs to HiSilicon’s Hi655x family, the PMIC series that works beside HiSilicon application processors on Huawei and Honor motherboards. It takes the system voltage from the battery line and converts it into the regulated rails your processor, memory, and peripheral circuits need before the phone can start. When this chip fails, the board usually shows no sign of life, pulls abnormal current on a DC power supply, or restarts in a loop before it reaches the home screen. You get a direct replacement for that exact stage of board-level repair, matched to the V110 revision printed on the original part. That revision match matters, because the system reads the PMU version during start-up and expects a value inside a supported range.
What the Hi655x PMIC Controls on the Board
HiSilicon’s own Linux driver work describes the Hi655x family as a PMIC that combines multiple voltage regulators with a clock output for the Wi-Fi and Bluetooth section. The application processor talks to the chip over an SSI link, reads its version register, and confirms the revision before it continues. The PMIC also raises interrupts for power-key press and release, system undervoltage, and over-temperature events. In practical terms, this chip acts as the first gate in the power-on sequence. If it cannot raise its rails or answer the processor, the board never reaches boot, no matter how healthy the CPU and storage are. A partially failed unit can also disturb Wi-Fi and Bluetooth start-up, since the radio section depends on the clock this PMIC supplies. That combination explains why experienced technicians put the PMIC near the top of the suspect list for dead phone and partial-function faults on HiSilicon boards.
Diagnosing a Hi6555 V110 Power IC Fault
Start every diagnosis on a DC power supply instead of a battery, because the current reading tells you more than the screen does. A board that pulls a steady high current with the power key untouched often has a shorted rail, and the PMIC frequently sits at the center of that short. Inject low voltage into the system line and locate the hot spot with rosin smoke, freeze spray, or a thermal camera. If the PMIC itself heats up, the internal regulator stage has likely failed. A board that pulls almost no current when you press power points elsewhere: check the battery connector, the power-key line, and the system supply path before you lift the chip. When the board powers but hangs on logo, measure the output rails at their filter capacitors with a multimeter and compare them against a known-good board. A missing or low rail with no external short confirms a PMIC fault and justifies the replacement.
Replacing the Huawei PMIC Hi6555 on Your Repair Bench
Mount the board in a PCB holder, shield nearby plastic connectors and the camera modules, and work under a stereo microscope so you can watch the solder flow. Preheat the board from below, apply quality flux, and lift the old chip with controlled hot air from your hot air station rather than forcing it. Clean the pads with desoldering wick until they sit flat and bright, and check that no pad has lifted. Tin the pads lightly, align the new Hi6555 V110 power IC using the pin-1 marker, and reflow it with steady, even heat. If your part needs fresh solder balls, use a reballing kit with a stencil that matches the package. After it cools, clean the area and measure each output rail before you reassemble the phone. A healthy DC supply reading at power-on gives you the final confirmation. If you change PMICs every day, a microscope with a longer working distance is the natural upgrade for your bench.
| Weight | 0.1 kg |
|---|
Key Features
- ✓Genuine HiSilicon Hi655x-family power management IC
- ✓Exact V110 revision for version-matched replacement
- ✓Multiple integrated regulators that feed processor, memory, and peripheral rails
- ✓Clock output that serves the Wi-Fi and Bluetooth section
- ✓SSI link to the application processor for control and version reporting
- ✓Interrupt reporting for power-key events, system undervoltage, and over-temperature
- ✓Direct replacement for board-level power fault repair on HiSilicon Huawei boards
- ✓Suited to microscope-guided hot air rework in professional repair shops
Specifications
| Brand | HiSilicon (Huawei) |
|---|---|
| Model | Hi6555 V110 |
| Category | Power Management IC (PMIC) |
| Compatibility | Huawei and Honor motherboards that carry the Hi6555 V110 marking |
| Technology | Hi655x-series multi-rail PMIC with integrated voltage regulators, Wi-Fi/Bluetooth clock output, and SSI interface to the application processor |
Common Repair Uses
- ✓Dead phone with no response to the power key
- ✓Short circuit on the system supply line traced to the PMIC
- ✓Abnormal current draw on the DC power supply at power-on
- ✓Hang on logo caused by a missing or low regulator rail
- ✓Boot loop issue linked to unstable power output
- ✓Over-temperature on the PMIC during voltage injection testing
- ✓Wi-Fi and Bluetooth start-up faults related to the PMIC clock output
- ✓Replacing a PMIC damaged during previous rework or liquid damage
Compatible Devices
- ✓HiSilicon Hi655x-series PMIC positions marked Hi6555 V110
- ✓Huawei motherboards built on HiSilicon chipsets that use the Hi6555 V110 PMIC
- ✓Honor motherboards built on HiSilicon chipsets that use the Hi6555 V110 PMIC
- ✓Board-level replacement only where the original chip marking reads Hi6555 V110 (match the revision before ordering)
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
How do I confirm a dead Huawei phone needs a Hi6555 V110 replacement?
Can I replace a Hi6555 V110 with a different Hi6555 revision?
Related products
339S0223 For iPad 5/Air1 A1474 Wifi IC – U5800 WiFi Module
In stock
343S0694 Touch IC U2402 iPhone 6 and 6 Plus Touch Black IC
In stock
358S IC T211 Samsung Tab Charging IC – Tab 3 USB Charger IC
In stock



