YCS Motherboard CPU Chip Pad Cleaning Brush (RED) Pakistan
₨ 250
Precision CPU Chip Pad Cleaning Brush
The YCS Motherboard CPU Chip Pad Cleaning Brush (RED) gives technicians a soft, high-density way to clear flux, dust and loose residue from motherboard pads and chip surfaces. The head carries about 10,000 PBT fibers, and the non-slip ABS handle keeps your strokes steady across tight BGA, CPU and IC footprints. Use it after hot air chip removal and before reballing, or any time a board needs a clean surface before inspection. It works as a universal bench brush for Android and iPhone boards, tablets and laptop PCBs. Mechanicpk supplies it to repair shops and service centers across Pakistan.
In stock
CPU Chip Pad Cleaning Brush Built for Board-Level Rework
The YCS Motherboard CPU Chip Pad Cleaning Brush (RED) is a CPU chip pad cleaning brush for one narrow job on the repair bench: clearing flux, dust and loose residue from motherboard pads and chip surfaces without gouging the copper underneath. It packs about 10,000 high-density soft PBT fibers into a compact head, and a non-slip ABS handle keeps that head steady in your hand. If you run IC change, CPU removal or eMMC reballing jobs, this brush covers the cleaning step between hot air removal and fresh solder application.
Fiber Density and Handle Design
The head uses soft PBT fibers at a density of roughly 10,000 per brush. Soft fibers matter on phone boards because CPU, PMIC and eMMC pads sit close together, and a stiff metal brush can lift a pad or scratch the solder mask beside it. Dense, soft bristles reach between neighbouring pads and pull out sticky flux that a cotton bud smears around. The lightweight ABS handle has a non-slip profile, so your hand stays relaxed through repeated passes over a busy board. The red finish makes the brush easy to spot on a crowded bench and easy to keep apart from the brushes you use for glue or tinning work.
Where the Brush Fits in Your Repair Workflow
Most board-level jobs follow the same order. You lift the chip with a hot air station, clear old solder from the pads with a soldering station and wick, then clean the footprint before you reball or reseat a new part. This brush handles the cleaning stage. Apply isopropyl alcohol (IPA) to the pad area, then sweep the bristles across the footprint in short, light strokes to lift flux residue and loose debris. A clean pad surface lets you inspect under a microscope with confidence and shows you whether a pad is intact or lifted before you commit to a reballing kit and stencil. Fixing the board in a PCB holder first frees both hands, so you brush with control instead of chasing a moving phone.
The same step helps on dead phone repairs that end in an IC change. A dirty footprint hides pad damage, and hidden pad damage turns into a hardware fault after the board goes back together. Clean pads also give your solder a better surface when you tin the footprint or attach ISP wires for eMMC and UFS work.
Choosing a Soft-Fiber Brush for Daily Bench Use
This brush suits routine cleaning: flux, dust and light residue. Hardened glue or stubborn tinning calls for a steel-wire glue remover brush, so many technicians keep both types in the toolbox and use the soft brush for most jobs. Rinse the head in IPA after use and let it dry before you store it, which keeps the fibers loose and ready for the next board.
After cleaning, a multimeter check across the footprint confirms continuity before you move on to a test box or an eMMC programmer with an ISP pinout tool. If your bench already includes hot air stations, soldering stations, microscopes, reballing kits and PCB holders, this brush completes the cleaning end of that chain at a low cost per job. Repair shops, service centers and training institutes across Pakistan can use it on Android and iPhone boards, tablets and laptop PCBs without matching it to a specific model.
| Weight | 0.7 kg |
|---|
Key Features
- ✓Approx. 10,000 high-density soft PBT fibers
- ✓Reaches between tightly spaced BGA and IC pads
- ✓Clears flux, dust and loose residue
- ✓Soft bristles clean without gouging pad copper
- ✓Lightweight ABS handle
- ✓Non-slip grip for steady strokes
- ✓Red color for easy bench identification
- ✓Works with IPA for flux removal
Specifications
| Brand | YCS |
|---|---|
| Model | YCS PCB Pad Cleaning Brush (RED) |
| Category | PCB Cleaning Brushes / Mobile Repair Accessories |
| Compatibility | Universal – not device-specific |
| Technology | High-density soft PBT fiber bristles, approx. 10,000 fibers |
| Material | PBT fiber bristles, ABS handle |
| Color | Red |
Common Repair Uses
- ✓Cleaning and surface preparation during board-level repair.
- ✓Removing flux residue after hot air chip removal
- ✓Cleaning BGA pads before reballing
- ✓Clearing pads after CPU or eMMC removal
- ✓Preparing the footprint during an IC change
- ✓Dusting boards before microscope inspection
- ✓Scrubbing flux away with IPA after soldering
- ✓Cleaning pad areas before applying new flux or solder paste
- ✓General PCB maintenance on phones, tablets and laptops
Compatible Devices
- ✓Universal – not device-specific. It cleans the board and chip surfaces below.
- ✓Android smartphone motherboards
- ✓iPhone logic boards
- ✓Tablet PCBs
- ✓Laptop motherboards and PCB boards
- ✓CPU, BGA and IC chip surfaces
- ✓Solder pads left after chip removal
- ✓Battery contact areas
- ✓Camera module areas
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
Can this brush clean BGA pads after I remove a CPU or eMMC chip?
Does this brush use hard steel bristles or soft fibers?
Related products
QIANLI 008 Cutting Knife Blade for BGA Underfill Removal
Out of stock
RELIFE RL-004SA silicone pad – Anti-slip
In stock



