1614A1 Charging IC for iPhone 12 Series (U9300 Tristar)
₨ 250
1614A1 Charging IC for iPhone 12 Board-Level Repair
The 1614A1 charging IC is the U2 Tristar replacement chip for the U9300 position on iPhone 12, 12 mini, 12 Pro, and 12 Pro Max logic boards. It handles the charger communication that a failed unit can no longer complete, so you see no charging, unstable charging, or a phone that ignores the cable. Match the marking on your old chip to 1614A1 before you start. The part suits technicians who do micro-soldering and IC change work on a hot air station under a microscope. Mechanicpk stocks it for shops across Pakistan that handle iPhone 12 charging issue repairs.
Out of stock
1614A1 Charging IC for iPhone 12 Series Board-Level Repair
The 1614A1 charging IC is the U2 Tristar chip that sits at position U9300 on the iPhone 12, iPhone 12 mini, iPhone 12 Pro, and iPhone 12 Pro Max logic boards. It manages the exchange between the Lightning port and the charging circuit. When it fails, the phone refuses to charge, charges only with certain cables, or never recognizes a connected charger. Mechanicpk supplies the 1614A1 for technicians who work at component level and need the exact part number, not a near match. If iPhone 12 boards come across your bench, keep this chip in your parts drawer.
How the iPhone 12 U2 Tristar IC Fits the Charging Path
Every charging session starts at the Lightning connector, and the U2 Tristar IC sits directly behind it. The chip communicates with the charger, which makes it one of the first parts to fail after a knockoff charger or a voltage spike. Distributors list a separate U2 part for each iPhone generation: 1612A1 for the iPhone 11 range, 1614A1 for the iPhone 12 range, and 1616A0 for the iPhone 13 range. Treat them as non-interchangeable. Read the marking on the old chip and confirm it matches 1614A1 before you order, so you avoid a second reflow on the same pads.
Diagnosing a Dead Charging IC Before You Replace It
Do not change the chip on a guess. Start with the Lightning port, because debris and a bent contact mimic a failed IC. Plug the phone into a DC power supply or a USB ammeter and watch the current draw. A dead phone that draws nothing, or a phone that charges only on one cable, points you toward the charging section. Then check the Lightning data lines with a multimeter in diode mode and compare against a known-good iPhone 12 board. A short or a clearly abnormal reading near U9300 supports the diagnosis. Inspect the area for liquid residue under the microscope before you heat anything.
Replacement Workflow at Your Repair Bench
Fix the board in your PCB holder, apply flux around U9300, and shield the neighbouring components. Set your hot air station for lead-free solder and lift the old chip with steady airflow. Clean the pads with flux and wick, then check them under the microscope for lifted or damaged pads. Place the 1614A1 with the correct orientation, reflow evenly, and let the board cool before you handle it. Power the board through your DC supply first, then test charging on a real charger and a second cable. This is IC change karna work: it needs clean pads, a steady hand, and a controlled temperature profile. If you do not have a reliable hot air station or microscope yet, upgrade those first.
| Weight | 0.1 kg |
|---|
Key Features
- ✓Exact 1614A1 part number for the iPhone 12 generation
- ✓Replaces the U2 Tristar chip at position U9300
- ✓Covers iPhone 12, 12 mini, 12 Pro, and 12 Pro Max
- ✓Targets no charging and unstable charging faults
- ✓Built for hot air station replacement under a microscope
- ✓Gives you a clear match against other generations (1612A1, 1616A0)
- ✓Suits IC-level repair work in busy repair shops
- ✓Fits daily iPhone board repair, from diagnosis to final test
Specifications
| Brand | Apple |
|---|---|
| Model | 1614A1 |
| Category | Charging IC (U2 Tristar) |
| Compatibility | iPhone 12, iPhone 12 mini, iPhone 12 Pro, iPhone 12 Pro Max |
| Supported Devices | iPhone 12 series |
| Technology | Tristar USB charging IC, board position U9300 |
Common Repair Uses
- ✓Real-world iPhone 12 charging fault scenarios.
- ✓No charging on any cable or charger
- ✓Intermittent charging that works with only some cables
- ✓Phone does not recognize a connected charger
- ✓Dead phone with no current draw on the DC supply
- ✓Chip failure after a knockoff charger or voltage spike
- ✓Charging fault after liquid damage, once the board is cleaned
- ✓Charging fault that remains after a new Lightning port
- ✓Board-level repair where the Lightning data lines test abnormal
Compatible Devices
- ✓Verified scope is the iPhone 12 generation, based on distributor documentation.
- ✓iPhone 12
- ✓iPhone 12 mini
- ✓iPhone 12 Pro
- ✓iPhone 12 Pro Max
- ✓Board position U9300 (U2 Tristar)
- ✓Not for iPhone 11 series (uses 1612A1)
- ✓Not for iPhone 13 series (uses 1616A0)
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
Which board position does the 1614A1 occupy on the iPhone 12?
Can I use the 1614A1 on an iPhone 11 or iPhone 13 board?
Related products
339S00108 WiFi IC For iPad Air iPad Pro 9.7 Replacement
In stock
339S0223 For iPad 5/Air1 A1474 Wifi IC – U5800 WiFi Module
In stock
343S0694 Touch IC U2402 iPhone 6 and 6 Plus Touch Black IC
In stock
A3B U2 610A3B Charging Power IC iPhone 7,7+ Tristar U4001
In stock
PM8916 Power Control IC – Qualcomm PMIC for MSM8916 Boards
In stock



