MT6315QP Power IC – MediaTek 4-Output Buck PMIC

₨ 400

MT6315QP Power IC for MediaTek Board-Level Repair

The MT6315QP power IC is a four-output step-down regulator from the MediaTek MT6315 series, rated at 5A per output with an input of up to 6V. Its outputs adjust from 0.4V to 1.19375V. The MT6315 family connects over SPMI and ships in a 45-pin WLCSP package measuring 2.35 x 3.44 mm. Use it for board-level power IC replacement when you have confirmed a fault on the rail it feeds. Match the top marking to your board schematic before you install it.

16 People watching this product now!
Description

MT6315QP Power IC: Verified Specs for MediaTek Board-Level Repair

The MT6315QP power IC belongs to MediaTek’s MT6315 series of step-down buck regulators. It provides four independent outputs, each rated at 5A, from an input of up to 6V. Output voltage adjusts between 0.4V and 1.19375V, which means you work with core-rail voltages on the bench. Because these rails power the processor, the correct part and top marking matter as much as the package itself.

Interface and Control

The MT6315 family connects to the host processor as a slave device over SPMI. This is confirmed in the Linux kernel driver for MT8192-based boards. If the rails stay down after replacement, check the SPMI lines and the host’s power sequencing before you condemn the new IC.

Package and Reballing

The part uses a 45-pin WLCSP package measuring 2.35 x 3.44 mm and operates from -30°C to 85°C. At this pitch, use a stencil that matches the footprint and a controlled hot air profile. Inspect under a microscope before and after reflow to catch bridged balls.

Bench Use and Verification

Replace this IC when a confirmed short on a buck output has failed the rail. After reflow, measure each output with a multimeter and compare it against the schematic. Confirm the top marking matches the board before power-up.

Additional information
Weight0.1 kg
Q & A
Please login to post questions

Key Features

  • Four step-down outputs in one package
  • 5A rating per output
  • Output range 0.4V to 1.19375V
  • Input up to 6V
  • SPMI slave interface
  • 45-pin WLCSP package, 2.35 x 3.44 mm
  • Operating temperature -30°C to 85°C
  • Surface-mount device

Specifications

BrandMediaTek
ModelMT6315QP
CategoryMobile Phone Power ICs
CompatibilityMT6315 series; MT8192-based boards (per Linux kernel driver)
Technology4-output step-down buck converter, SPMI interface
Input VoltageUp to 6V
Output Voltage0.4V to 1.19375V
Power Rating5A per output
Dimensions2.35 x 3.44 mm (45-pin WLCSP)
Weight0.01 kg

Common Repair Uses

  • Power IC replacement after a confirmed short on a buck output
  • Restoring rails on a board that will not power after liquid or heat damage
  • Rework and reballing of a 45-pin WLCSP package
  • Checking output rails with a multimeter after reflow
  • Diagnosing a dead board when one rail stays down

Compatible Devices

  • MT6315 series, with the QP variant confirmed by top marking against the board schematic
  • MT8192-based mainboards, per the MT6315 kernel driver
  • Other platforms: not device-specific; confirm rail requirements on the schematic

FAQ

What is the product name?
The product name is MT6315QP Power IC.
What is the brand of this product?
The brand of this product is MediaTek.
What is the model of this product?
The model of this product is MT6315QP.
What is this product used for?
This product is used for board-level power IC replacement on MediaTek mainboards.
Which devices are compatible with this product?
This product is compatible with MT6315 series boards, verified for MT8192-based designs; confirm other platforms against the schematic.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
Which interface does the MT6315QP use?
The MT6315 family uses an SPMI slave interface, per the Linux kernel driver for MT8192-based boards.
What is the package size of the MT6315QP?
The MT6315QP uses a 45-pin WLCSP package measuring 2.35 x 3.44 mm.