SM5705Q Charging IC, BGA Mobile Phone IC

₨ 300

SM5705Q Charging IC for Board-Level Repair

The SM5705Q charging IC ships as a BGA package part, so it suits technicians who already do hot air rework. Removing and refitting it needs a hot air station, flux, and a microscope for alignment. Each unit is listed under SKU MST-IC-347 as a standalone component, not a complete board. Check the part marking against your target board before you order. Use this IC only after the charging port, cable, and battery checks pass.

14 People watching this product now!
Description

SM5705Q Charging IC: BGA Rework Overview

The SM5705Q is a BGA mobile phone IC listed under the Mobile Phone ICs category. Its package decides how you handle it on the bench. Confirm the part marking and the board it goes into before you start any rework. This keeps your repair workflow focused on the right component from the first step.

Package and Rework Requirements

This IC uses a BGA package, so the solder joints sit under the chip and cannot be inspected by eye. Plan for hot air removal, pad cleaning with flux, and reflow under a microscope. If your unit does not arrive pre-balled, you need to reball it before fitting. Skipping pad cleaning or misaligning the ball grid leads to cold joints that fail later.

Where It Fits in Your Diagnostic Order

Work through the basic checks before you replace any IC. Test the charging port, the flex cable, and the battery first, since these fail more often and cost less to swap. Once those pass and the fault still points to charging control, the IC becomes the next step. Record each test result so you can show the customer why the chip was replaced.

Ordering and Stock Notes

This listing carries SKU MST-IC-347 and a shipping weight of 0.01 kg. The product is currently marked sold out on the store, so confirm availability before you promise a repair date to a customer.

Additional information
Weight0.1 kg
Q & A
Please login to post questions

Key Features

  • BGA package for hot air rework
  • Requires reballing if not pre-balled
  • Standalone IC, sold as a single component
  • Listed under Mobile Phone ICs

Specifications

ModelSM5705Q
CategoryMobile Phone ICs
PackageBGA
Weight0.01 kg

FAQ

What is the product name?
The product name is SM5705Q Charging IC.
What is the model of this product?
The model is SM5705Q.
What package does this IC use?
This IC uses a BGA package, which requires hot air rework equipment.
Who should use this product?
This product suits mobile repair technicians and repair shops that handle board-level work.