BCM43596 Wi-Fi IC – Dual-Band 802.11ac PCIe Chip
₨ 600
Dual-Band 802.11ac Wi-Fi IC with PCIe Interface
The Broadcom BCM43596 is a dual-band 802.11ac Wi-Fi IC that connects to the host processor over PCIe. It operates across the 2.4 GHz and 5 GHz bands, which makes it relevant when a handset loses Wi-Fi detection or drops wireless connections after board-level work. Technicians reference it for Sony Xperia X Performance, XZ, and XZs boards, where the chip appears in Linux kernel driver documentation. Confirm the marking on the original chip before you order a replacement.
BCM43596 Wi-Fi IC for Board-Level Wireless Repair
The BCM43596 Wi-Fi IC is a Broadcom dual-band 802.11ac component built for handsets that use a PCIe host link. When a device shows no Wi-Fi networks or cannot hold a connection, the Wi-Fi IC is one of the first board-level components to check. This page covers the verified technical profile, where the part fits in your repair workflow, and what to confirm before ordering.
Verified Technical Profile
The chip supports 802.11ac on both 2.4 GHz and 5 GHz, and it communicates with the host through a PCIe interface. Driver documentation for this family states that it works without special initialization on supported platforms. The firmware maps to the BCM4359 family, so technicians working on the related chip can apply the same driver knowledge.
Where It Fits in a Repair Workflow
Start with the basics: confirm whether the phone detects the Wi-Fi module at all, then check the supply rails and PCIe lines with a multimeter before you lift anything. If the diagnosis points to the IC, a hot air station, a microscope for inspecting pads, and a PCB holder keep the board stable during removal. Pair the IC with a reballing kit when the new chip needs fresh balls. These tools form the core of an IC-level Wi-Fi repair bench.
Before You Order
Compare the marking on the failed chip with the part number in this listing. Two parts can share a family name but differ in package and suffix. Check the board layout and the original part before you commit to a replacement.
| Weight | 0.1 kg |
|---|
Key Features
- ✓Dual-band 802.11ac Wi-Fi support (2.4 GHz and 5 GHz)
- ✓PCIe host interface
- ✓Supports BCM4359-family driver workflow
- ✓Suited to board-level IC replacement
Specifications
| Brand | Broadcom |
|---|---|
| Model | BCM43596 |
| Category | Wi-Fi IC |
| Compatibility | Sony Xperia X Performance, Sony Xperia XZ, Sony Xperia XZs |
| Supported Devices | Sony Xperia X Performance, Sony Xperia XZ, Sony Xperia XZs |
| Technology | IEEE 802.11ac, dual-band (2.4 GHz and 5 GHz), PCIe host interface |
Common Repair Uses
- ✓Board-level Wi-Fi fault repair and IC replacement
- ✓Diagnosing Wi-Fi that fails to detect or connect
- ✓Replacing a failed Wi-Fi IC through hot air rework
- ✓Cleaning and inspecting pads before reflow
- ✓Reballing the chip when a new IC needs fresh balls
Compatible Devices
- ✓Sony Xperia X Performance
- ✓Sony Xperia XZ
- ✓Sony Xperia XZs
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
Does this chip support dual-band Wi-Fi?
Which interface does this Wi-Fi IC use?
Related products
343S0694 Touch IC U2402 iPhone 6 and 6 Plus Touch Black IC
In stock
A3B U2 610A3B Charging Power IC iPhone 7,7+ Tristar U4001
In stock
PM8916 Power Control IC – Qualcomm PMIC for MSM8916 Boards
In stock



