SM7150-AB Snapdragon 730G CPU IC Chip Pakistan

₨ 3,600

SM7150-AB Snapdragon 730G CPU Chip

The SM7150-AB is the application processor for Qualcomm’s Snapdragon 730G platform. It combines an octa-core Kryo 470 CPU, an Adreno 618 GPU, a Spectra 350 image signal processor and the Snapdragon X15 LTE modem in one 8nm package from Samsung’s fab. For technicians, this is the IC you reach for when a Snapdragon 730G board shows dead phone symptoms, boot loops or hang on logo after liquid or impact damage. When the CPU is the confirmed fault, reballing or replacing it is the planned repair.

20 People watching this product now!
Description

SM7150-AB CPU IC Pakistan: Snapdragon 730G Board-Level Repair

Mechanicpk stocks the SM7150-AB CPU IC for technicians across Pakistan who work on Snapdragon 730G boards. The part number identifies the Snapdragon 730G mobile platform, a mid-range Qualcomm SoC fabricated on Samsung’s 8nm process. Application processing, LTE baseband, graphics, image processing and DSP functions all sit inside this single package. When you isolate a fault to the CPU, this IC is the component you remove, reball or replace. Confirm the exact part number before you commit to a rework, because a close-looking chip with a different suffix will not match the original.

Core Layout and Graphics

The SM7150-AB uses an octa-core Kryo 470 arrangement split into two clusters. Two Gold cores run at 2.2GHz for demanding tasks, and six Silver cores run at 1.8GHz for background work. This big.LITTLE design balances load against power draw. On the bench, that split explains why CPU faults often show up as abnormal current draw on the CPU rail. Check the power rails and PMIC outputs before you condemn the processor. The Adreno 618 GPU handles display rendering on the same package, so display symptoms can trace back to this IC as well as the panel.

Integrated Connectivity, Imaging and Memory

The Snapdragon X15 LTE modem is integrated into the SM7150-AB, so cellular connectivity does not depend on a separate baseband IC. Qualcomm rates peak download at 800 Mbps and peak upload at 150 Mbps. When a board loses network signal alongside CPU symptoms, inspect this IC’s solder joints before you replace the RF section. The Spectra 350 image signal processor and Hexagon 688 DSP also sit in this package. Camera failures that appear alongside boot or performance faults can therefore point to the CPU rather than the camera module. The chip pairs with LPDDR4X memory, so verify the memory package on the board after any CPU rework.

Repair Workflow for Snapdragon 730G Boards

Most CPU jobs on this IC follow three patterns. Dead after flash boards show no boot response after a successful flash, which points to a failed processor rather than corrupted firmware. Hang on logo boards after liquid exposure often have corrosion under the BGA balls that creates intermittent contact, and full reballing addresses it. Boards with cracked CPU balls or lifted pads after impact need controlled hot air, a stencil matched to the ball pattern, and pad inspection before reflow. Use a temperature profile suited to the ball composition, and inspect the pads under the microscope before you reball. Source a chip with a verified part number, because remarked parts fail early and cost you the repair twice.

Additional information
Weight0.1 kg
Q & A
Please login to post questions

Key Features

  • Octa-core Kryo 470 CPU: two Gold cores at 2.2GHz and six Silver cores at 1.8GHz
  • Built on Samsung’s 8nm process technology
  • Adreno 618 GPU for display and graphics processing
  • Snapdragon X15 LTE modem integrated in the package, with peak download of 800 Mbps
  • Spectra 350 image signal processor
  • Hexagon 688 DSP
  • LPDDR4X memory support
  • Matches Snapdragon 730G board-level part number SM7150-AB

Specifications

BrandQualcomm
ModelSM7150-AB
CategoryMobile Phone ICs
CompatibilitySnapdragon 730G platform
Supported DevicesSnapdragon 730G-based smartphones, including Xiaomi Mi CC9 Pro, Xiaomi Mi Note 10 series, and Motorola Moto G9 Plus
TechnologySamsung 8nm, Kryo 470, Adreno 618
Weight0.01 kg

Common Repair Uses

  • CPU-level board repair on Snapdragon 730G devices
  • CPU IC reballing after board-level short circuits
  • Dead phone and dead-after-flash diagnosis where the CPU is the confirmed fault
  • Hang-on-logo repair after liquid damage or corrosion under the BGA
  • CPU replacement after cracked balls or lifted pads from impact
  • No-power and boot loop diagnosis on Snapdragon 730G boards
  • Modem and network fault repair when traced to the CPU package

Compatible Devices

  • Snapdragon 730G chipset family, with device-specific scope as listed
  • Snapdragon 730G-based smartphones (chipset-family compatibility)
  • Xiaomi Mi CC9 Pro
  • Xiaomi Mi Note 10 series
  • Motorola Moto G9 Plus

FAQ

What is the model of this product?
The model of this product is SM7150-AB, the part number for the Snapdragon 730G mobile platform.
What is this product used for?
This product is used for CPU-level board repair, including IC reballing and replacement on Snapdragon 730G devices.
Which devices are compatible with this product?
This chip matches the Snapdragon 730G platform, which appears in devices such as the Xiaomi Mi CC9 Pro and Motorola Moto G9 Plus.
Who should use this product?
This product suits mobile repair technicians, repair shops, service centers, and professional PCB repair businesses.
Does the SM7150-AB include an integrated LTE modem?
Yes. The Snapdragon X15 LTE modem sits in the same package, so no separate baseband IC is needed for cellular connectivity.
What CPU core configuration does the SM7150-AB use?
It uses two Kryo 470 Gold cores at 2.2GHz and six Kryo 470 Silver cores at 1.8GHz.