338S00817 Wireless Charging IC for iPhone 13 Series

₨ 400

338S00817 Wireless Charging IC

The 338S00817 is a wireless charging IC for the iPhone 13 series, covering the iPhone 13, 13 mini, 13 Pro and 13 Pro Max. When wired charging works but wireless charging does not start, this component is the first place to inspect on the board. Replacing it requires board-level rework with a hot air station, a microscope for pad alignment, and clean flux work. Before ordering, confirm the part marking on the device, because the 338S00770 charging IC serves a different function on the same series.

15 People watching this product now!
Description

iPhone 13 Wireless Charging IC 338S00817: Role and Replacement

The iPhone 13 wireless charging IC 338S00817 manages wireless power reception on the iPhone 13 series. It sits apart from the wired charging path, so a technician can separate a wireless fault from a USB fault during diagnosis. This part suits repair shops and service centers that handle board-level charging repairs on these models.

Where It Fits in the Charging Path

The series also uses the 338S00770-B0 as its charging IC, which handles a different role in the power chain. Testing the two separately saves time on the bench. If wired charging fails too, the fault may lie outside the wireless section, and the technician should check the wired path before replacing any IC.

Fault Symptoms Technicians Check First

A device that shows no response on a wireless pad, while wired charging works normally, points toward this section. Check the pads, the coil connection, and nearby passive components before removing the IC. Liquid damage and previous board-level repairs can also cause this fault, so inspect for corrosion around the IC area under magnification.

Replacement Workflow on the Bench

Remove the IC with controlled hot air, then clean the pads with flux and a solder wick without lifting them. Align the new 338S00817 under a microscope, reflow it evenly, and check for bridged pins. Test wireless charging on a known-good pad after reassembly, and confirm wired charging still works.

Additional information
Weight0.1 kg
Q & A
Please login to post questions

Key Features

  • Wireless charging power management for iPhone 13 series
  • Board-level replacement part for repair shops
  • Model-specific match for iPhone 13, 13 mini, 13 Pro and 13 Pro Max
  • Requires hot air rework and microscope alignment

Specifications

BrandApple
Model338S00817
CategoryMobile Phone ICs
CompatibilityiPhone 13 series
Supported DevicesiPhone 13, iPhone 13 mini, iPhone 13 Pro, iPhone 13 Pro Max
TechnologyWireless charging IC

Common Repair Uses

  • Restoring wireless charging on iPhone 13 series devices where wired charging works
  • Board-level replacement after the wireless charging section fails
  • Isolating a wireless charging fault from a wired charging fault during diagnosis
  • Reflow and reattachment work during charging-section repair

Compatible Devices

  • iPhone 13 series
  • iPhone 13
  • iPhone 13 mini
  • iPhone 13 Pro
  • iPhone 13 Pro Max

FAQ

What is the model of this IC?
The model of this IC is 338S00817.
Which iPhone models use this IC?
This IC is listed for the iPhone 13, iPhone 13 mini, iPhone 13 Pro and iPhone 13 Pro Max.
Is this the USB charging IC?
No. Distributor listings identify the 338S00770-B0 as the charging IC for this series, while 338S00817 handles wireless charging. Confirm the board marking before replacing.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
Does this IC fix wired charging problems on iPhone 13?
Not directly. This IC handles wireless charging, so if wired charging fails, check the wired charging path and the 338S00770-B0 before replacing this part.
Does replacing this IC need a hot air station?
Yes. Removing and installing it requires board-level rework with a hot air station and a microscope for accurate pad alignment.